The ES-206U is a "stand-alone" Video Time/Date Generator & Inserter which superimposes Time and Date information onto a looped-thru video signal. The unit generates six digits of date (Month, Day & Year) and six digits of time (Hour, Minute & Second). With the ease of on-screen programming setting the ES-206U is a snap. Controls include Time & Date set and Size, Position & Brightness set. The unit also has several styles of background masks which include, solid characters on video, translucent characters on video or translucent characters on a translucent grey mask. A display setting mode allows the user to view the time and date side by side, stacked, time blanked or date blanked. An optional RS-232 Interface Windowsr Control Panel Software may be ordered, which allows remote control of the display modes. Other features include 12 or 24 hour selection and daylight savings time mode. Options: Black, C (ES-206U Only), D, DC, I/O, J, P2, R, UL
The ES-266U is a Video Time and Date Slave which decodes either ESE Serial Time CodeTM or SMPTE/EBU Time Code. The unit superimposes six digits of date (Month, Day & Year) and six digits of time (Hour, Minute & Second) onto a looped-thru video signal. The ES-266U also has the ability to superimpose timer information if connected to an ESE timer (ES-362U, ES-520U, etc.). On-screen programming features include setting of date, position, size, brightness, mask selection, daylight savings time, and 12/24 hour mode selection. As with the ES-206U an optional RS-232 interface and software can be specified.
The ES-306U is a Video Up/Down Timer "Inserter". Up to seven digits (Hr, Min, Sec, Tenths) are superimposed onto a video signal looped-thru the unit. Hours and Tenths may be blanked if desired. On-screen menus allow timer presetting, adjustment of the display Size and Position, Mask Selection, Tenths On/Off, Hours On/Off, and Zero Mode (Normal Underflow, Stop, Reverse, or Auto Preset at Zero). The brightness of the Characters and Background may be individually set via front-panel controls. The display may be turned on/off via a front-panel control. Optional RS-232 interface and software is available.