-
The LED1000 Pro Bi-Color 3-Light Studio Kit with V-Mount Battery Plates from Dracast is a powerful, AC/DC solution for photographers and videographers in the studio or on the road. The kit includes three LED1000 Bi-Color LED Panels, three light stands with individual cases, three multi-voltage power supplies, a set of 4-way barndoors, and a filter frame and filter kit for each light. Each light has a V-mount battery plate.
At just 5.5 lb, the LED1000 Pro Bi-Color LED Light is a lightweight...
Read More
-
The F-1300 Series Speaker are compact two-way speaker systems designed for high efficiency, wide range, and high power input handling capability. These speaker systems can be installed in a manner ideal for the location and intended application. The F-1300BTWP features a water-proof design (splash-proof type meeting IPX4 standard), so that it can be permanently installed outdoors.
Features: Innovative Octagonal horn provides wide dispersion
Various moutn brackets
Stylish and highly...
Read More
-
The Thor Broadcast H-HDMI-E/D is an IP Streaming Encoder/Decoder which uses H.264 protocol to extend HDMI video, IR and RS232 control signals over IP networks. It works with one control PC (Wake on LAN) and one switch whose transmission rate is 100Mbps or higher to control a variety of functions. The H-HDMI-E/D features 1080p HDMI video switching, video wall, video live preview, audio de-embedding, audio switching, IR&RS232 transmission, video recording, PoE, etc. The controlling software,...
Read More
-
The iPower 9V-800MAH is a 9V, 800mAh, rechargeable Li-Polymer battery, known worldwide and preferred by TV stations and audio professionals.
Features: Internal Li-Polymer cell is more stable and secure
iPower Li-Polymer battery fast charge will not heat up
Strong signal, no noise & no interference
Light weight, no memory effect
Longer service life
Specifications: Nominal Voltage: 7.4V
Rated Capacity: 800mAh
Charge Method: C.C/C.V.
Charge...
Read More
-
QSC AcousticDesign™ Series AD-S802T is a 8-driver column surface-mount loudspeaker. This premium full range system is capable of 70V/100V or 8 ohm bypass loads, making it ideal for a wide variety of foreground and background applications with acoustically-challenged environments. Equipped with a unique pan/tilt mounting system, the column surface-mount loudspeakers offer multiple positioning locations allowing the loudspeaker to remain close to the wall while delivering up to -20°...
Read More
-
The mixing console is arguably one of the most important assets in the entire audio world, and rightly so- it's the lifeblood of your production. Keeping this in mind, Osprey designed a series of cases perfectly suited for the complete protection and convenient transportation of your console. All OSP mixer cases are constructed with sturdy 3/8" plywood, industrial-grade hardware and high-density shock-resistant foam, all to help ensure your mixer arrives to its destination safely. The "-DH" models...
Read More
-
The Prompter People CASE-HSPR is a Medium Size Travel Case for a single (1) Presidential Teleprompter 15" - 19". Dual (2) teleprompter units require two cases!
Read More
-
Power a Sony FX6 camera for hours with the Anton/Bauer FX6 Micro Battery Slide Pro!
The custom-designed aluminum mount weighs just 1.0lbs and attaches seamlessly into the Extension Unit Connector on the top of the camera providing a secure platform to mount a Gold-Mount battery directly to the camera with a streamlined profile that fits perfectly into a camera case for compact packing.
The Battery Slide Pro plate steps up the output of a 14.4V battery to the required 19.5V DC, delivered...
2 Mount Available
-
The Avenger A1020B Combo Stand 20 is a black aluminium stand with 3 sections and 2 risers. It's a heavy duty stand that can support a payload up to 25kg and can reach a maximum height of 1.98m. It is also compatible with A900NB braked wheels which are sold separately. It has a 5/8'' (16mm) male stud top attachment and a 1''1/8 (28mm) female receiver. It also features 1 levelling leg to keep the stand steady on uneven surfaces.
Features: Load capacity: 25kg
1 levelling leg
Compatible with...
Read More
-
Due to the rising digitisation the interface problems between audio/video networks, IT equipment, MP3 camcorders, etc. increase. A rugged solution is needed.
Neutrik's reversible USB gender changer, mounted in the standardized D-shape housing, and the rugged patch cables solve this problem.
Features: Ideal for audio networking and integration of computer based equipment into audio systems
IP65 ingress protection in mated condition with NKUSB-* and SCDP-* sealing gasket
USB 2.0 gender changer...
Read More
-
HamiltonBuhl® SchoolMate™ Personal-Sized Stereo Headphones with In-Line Volume Control
The HamiltonBuhl® SchoolMate™ HA2V headphones are constructed to be rugged and durable, yet lightweight for long-term comfort wear, making them perfect for today - whether in tech-filled classrooms or studying remotely.
With ever-growing technology, each student needs a high quality, durable headphone to get the most out of their high tech lessons and the HA2V stereo headphone with...
Read More
-
Compact 24V Rechargeable Battery Pack Housing Kit
AmpliVox S1468 is a rechargeable battery pack housing kit that makes an excellent wireless, rechargeable alternative power source for many of AmpliVox's sound lecterns that have the 150 watt compact amplifier. Runs for up to 8 hours on a full charge.
Features: A general purpose battery supply that makes an excellent wireless, rechargeable alternative power source for many of AmpliVox's sound lecterns.
Compact 24V rechargeable battery...
Read More
-
The LCD-2B flat panel desk mount holds most 10" to 23" flat panels via clamp-on or bolt. Rotatable 360 degrees, this versatile mount also tilts up to 30 degrees, making the screen visible no matter what side of the desk you are sitting on.
Features: Holds 10" - 23" flat panels
Accommodates flat panels with 75 or 100 mm VESA hole patterns
Rotates 360° at base
Adjustable -5° to +30° tilt
Force arm has adjustable 0° to 60° forward tilt
Can be attached as a clamp-on...
Read More
-
The SCM0004-Wx Miniature Clip, Small is a specially-designed clip for quick and easy chest mounting of our Miniature Microphones. This holder is available in black and white. It can be purchased as a single unit or in a 10 piece set.
The holder replaces the DMM0004, which does not fit the reinforced Omnidirectional Microphones. The holder is backwards compatible with the non-cable reinforced Miniature Microphones via an included sliced-cable relief.
Specifications: Color:...
Read More
-
For fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all Cat5e TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL). Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted...
Read More
-
Tripp Lite's U330-15M USB 3.0 SuperSpeed Active Extension Repeater Cable (M/F) increases the length of a device cable up to 49-ft. (14.93 m) with no worry of signal loss. By daisy-chaining two cables, you can extend the length between USB devices up to 98-ft. (29.87 m). Connect the male plug to a USB port on your computer or hub and the female end to a USB device cable. A built-in bus-powered signal booster ensures peak performance. Backward compatible with previous USB generations, this...
Read More
-
This ikan PT-STNDMT adapter converts a baby 5/8" stud light stand tip to a 3/8" thread. It allows for vertical or horizontal mounting of a light fixture that has a 3/8" threaded receptor. Locking knob to lock the adapter to the light stand.
Features: 5/8" receiver to 3/8" thread adapter
Locking knob
Allows vertical or horizontal mounting
Specifications: Shipping Weight: 1Lbs
Shipping Dimensions: 5 x 4 x 2"
Product Weight: .25Lbs
Product...
Read More
-
You no longer need to choose between servicing a black rack in a dark room or working one handed as you juggle a flashlight. Simply add Forward Utility Lighting to your BGR.
Forward Utility Lighting illuminates the full height of the enclosure with bright white light at an optimal angle for unmatched visibility that will allow you to get the job done in a fraction of the time because, now you can see.
If you think you're swapping service convenience for pain of installation- think again....
4 Rack Units Available
-
Amplify your Outdoor WiFi AC with Premium Connectivity & Versatility
The HOW12ACM Outdoor WiFi AC1300 Access Point Extender PoE is a highly-reliable industrial outdoor wireless ac access point designed to extend wireless network coverage in outdoor environments. It supports IEEE 802.11a/n/ac and is backwards compatible with the IEEE 802.11b/g/n wireless network standard. Also, the HOW12ACM Outdoor Wireless AC Access Point provides simultaneous operation in both the 2.4GHz and...
Read More
-
The Saramonic LC-XLR is a microphone cable with a standard female XLR connector on one end, and a Lightning connector at the other end - which enables you to connect professional microphones directly into Apple iPhones, iPads, and iPod Touches. Using the LC-XLR is incredibly simple: you just connect an XLR microphone, plug it into your Apple device and start recording or broadcasting. There are no settings or controls to adjust, it's truly plug-and-play.
Because the LC-XLR...
Read More
-
The AN-30U2 has built-in dual wireless microphone receivers (includes AC-30). The AN-30 is the smallest speaker in the Anchor Audio product line, but it still offers powerful sound. It effortlessly mounts to a wall or ceiling - only weighing 1.5 pounds!
Classrooms
AV Carts
Studio Monitor
Conference Rooms
Install & Integration Projects
Marching Band
Front Ensembles
The AC-30 is the power source/adapter for the AN-MINI, MiniVox, and RescueMAN...
Read More
-
Industry standard fusion splice fiber optic sleeves. These sleeves offer durable and lasting protection of single fiber splices in field installations of Single Fibers Up to 900 Micron Fiber.
Each splice sleeve is specially designed for optical components, where small packaging is a priority. These micro sleeves provide the known reliability of Fujikura sleeves in the smallest possible lengths. This easy and cost effective method is a great alternative to recoating. Each splice has an...
Read More
-
Filled with pro features to take on any modern production, the V-160HD sets a new standard in hybrid event switching. Connect with live audiences in Full HD with comprehensive SDI and HDMI I/O and simultaneously stream to any popular web platform via USB-C. There's also an eight-layer video effects engine, a 40-channel digital audio mixer, and integrated PTZ camera control, plus next-generation cue management and live show automation features that make tough production tasks simple. And everything's...
Read More
-
The Sennheiser MKE 400 is a compact, highly directional on-camera shotgun microphone designed to isolate and enhance the audio for your video. Like the MKE 200, the MKE 400 includes built-in wind protection and integrated shock absorption, while offering even more features to ensure the best possible recordings.
A three-step sensitivity switch enables the MKE 400 the ability to provide distortion free sound in any environment, and a switchable low-cut filter focuses your audio on the most...
Read More
-
Use the Ferrofish VERTO RACK EARS kit to mount VERTO devices into a 19 inch rack.
Compatible to the following devices:
-Ferrofish Verto 32
-Ferrofish Verto 64
-Ferrofish Verto MX
Features: Black
Pulver coating
Typical Ferrofish "ear" design
Read More
