Narrow Results:

• 

  Bittree B48DC-FNSST/E3 M2OU12L 2RU 2x24 Long-Frame Audio Patchbay - Black

  The Bittree B48DC-FNSST/E3 M2OU12L is a Front Selectable 1/4" Long-Frame 489s Series Audio Patchbay in 2RU in a spacious 2x24 jack configuration with mono (even) jack spacing. Selectable normalling and grounding: Circuits can be easily changed via shunts under both designation strips. It features 2 x DS800-10SA-ASSY designation strip assemblies, "Over/Under" orientation and has mating hardware and 6" (15.24 cm) deep rear lacing bar are both included. The Bittree B48DC-FNSST/E3...

  

  Read More

  Item #: BIT-B48DCFNSSTM2

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $1,045.00

  Add to Wishlist
• 

  My Custom Shop PBXLR-12COMBO 12-Port XLR & 1/4-TRS Combo Feed-Through Patchbay w/ Neutrik NCJ6FI-S - 1RU

  The backbone of the PBXLR-12COMBO is its Neutrik NCJ6FI-S jacks featuring both a 3 pole XLR female receptacle and a 1/4" stereo jack in the same housing. This give you a convenient way to mix and match your connections without the hassle of adapters or specially wired cables. The folks at My Custom Shop deliver this box as a fully wired solution from front-to-back so it's a complete plug and play feedthru solution. Custom configurations available. Features: Conveniently Mix & Match Connections 1RU...

  

  Read More

  Item #: PBXLR-12COMBO

  Availability: In Stock

  Our Price: $289.95

  Add to Wishlist
• 

  Bittree DSKP124-BC6APS Flush-Mount Modular Keystone Panel in 1 RU with 1x24 Jack Configuration

  The Bittree DSKP124-BC6APS is a flush-mount modular keystone panel in 1 RU with 1x24 jack configuration. Panel and jack modules are packaged separately for simplified termination/integration. 180-Degree jack design allows for tool-less termination within 90 seconds. Features: RJ45 jack to 110 IDC (punchdown) interface with shielding for protection from EMI, RFI, and alien crosstalk Exceeds ANSI/TIA-568-C.2 Category 6A requirements Die-cast nickel-plated zinc clamshell housing Nickel-plated...

  

  Read More

  Item #: DSKP124-BC6APS

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $400.40

  Add to Wishlist
• 

  Bittree 969A018 Audio TT (BANTAM) Full Normal/Isolated/Front Programmable/969-A Series/2X48 - 2 RU - E3 Rear Interface

  Our 969-A Series features our innovative Programmable audio patchbays in a 2 x 48 1.5 or 2 RU size, and includes convenient 1-48 left-to-right numbering on the patchbay front panel for easy circuit identification. Programmable patchbays such as the 969-A Series allow users to quickly and easily change the normals and grounding of individual circuits. Normals can be changed to full-normal, half-normal or non-normal. Grounding can be changed to bussed, isolated or looped (for switched grounds, consider...

  

  Read More

  Item #: BIT-969A018

  Availability: Direct Ship from manufacturer, contact us for availability

  Our Price: $1,427.00

  Add to Wishlist
• 

  AVP 1x16/ 1RU /16 JJ300 4K/8K UHD 24 Ghz Feedthru BNC Non-Recessed Patchbay

  BulkHead connector panels are heavy-duty rigid phenolic panels with attractive textured black semi-gloss finish. It has high-performance JJ300 BNC-BNC connectors for analog to digital applications up to 3GHz. Features: Heavy-duty Rigid Phenolic Panels Attractive Black Semi-Gloss Finish Hi-Performance BNC-BNC and F-F Connectors Configurations up to 3x24 available Specifications: Height : 1.74 in Impedance : 75 ohm Width : 19 in Color : Black Construction : Brass, Bright Nickel Plated Number...

  

  9 Types Available

  Item #: WK-F116E1-JJ300

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $156.91

  Add to Wishlist
• 

  Bittree B48DC-FNPLT/ID M2OU12L 2 RU Black 2X24 Mono Long-Frame Patchbay

  The Bittree B48DC-FNPLT/ID M2OU12L is a 2x24 mono long-frame patchbay with front selectable TRS audio. Features: Spacious 2x24 jack configuration with mono (even) jack spacing Selectable normalling and grounding: Circuits can be easily changed via shunts under both designation strips Digital AES wire used for internal wiring 2 x DS800-10SA-ASSY designation strip assemblies, "Over/Under" orientation Mating hardware included with E3, E90, and ID (Punchdown) rear interfaces 6" (15.24...

  

  Read More

  Item #: BIT-B48DC-FNPLT

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $1,033.00

  Add to Wishlist
• 

  Middle Atlantic UCP-CH Rackmount Chassis for UCP Modules

  You asked for it, we've got it! Our 2 space UCP chassis holds five modules in the front, and five modules in the rear. Shipped fully-assembled, each unit is comprised of four threaded FK bars, a pair of ears 9" deep, top and bottom, and all necessary module mounting hardware. The top and bottom can be easily removed, leaving the frame intact.

  

  Read More

  Item #: UCP-CH

  Availability: In Stock

  Our Price: $132.30

  Add to Wishlist
• 

  Bittree DSKP124B-C6FS 1RU 1X24 CAT6 RJ45/RJ45 Shielded DES Patch Panel with Tie Bar - Black

  The Bittree DSKP124B-C6FS is a flush-mount modular feed-through patch panel in 1 RU with 1x24 jack configuration. It has RJ45 jack to RJ45 jack with shielding for protection from EMI, RFI, and alien crosstalk. The CAT6 jacks feature high-impact ABS resin housing and PBT contact holder, nickel-plated phosphor bronze contacts with gold over plate, and shielded connector for protection from EMI, RFI and alien crosstalk. The DSKP124B-C6FS keystone jacks mount flush with the surface...

  

  Read More

  Item #: BIT-DSKP124BC6FS

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $346.00

  Add to Wishlist
• 

  My Custom Shop 16XLRM 16-Port XLR Male Patch Panel w/ Neutrik NC3MD-L-1 Connectors - 1RU

  My Custom Shop proudly builds audio rack panels and patchbays in their US facility using only quality components from suppliers such as Neutrik, Switchcraft, Canare, and Senko. With 20 years of experience in the custom metal plate and panel industry, My Custom Shop now offers a diverse variety of standard models in 1, 2, and 3RU sizes, with connector options including XLRs, RCAs, 1/4 and 3.5mm jacks, and more. Specifications:

  

  4 Patch Points Available

  Item #: 16XLRM

  Availability: In Stock

  Our Price: $119.00

  Add to Wishlist
• 

  Switchcraft QGPK1DE8M8FB DE Series QG Panel XLR Patchbay - 8 Male & 8 Female - Black

  Switchcraft QGPK rack panels come preloaded with 8 Male & 8 Female DE-Series 3-pin XLR connectors . This panel provides an ideal option for installers and sound contractors requiring fast access to all XLR panels. Panel features a rear tie bar to keep the back of the rack clean and dressed. Features: 8 3-Pin Male XLR - Rear Solder Point 8 3-Pin Female XLR - Rear Solder Point Rear Tie Bar

  

  Read More

  Item #: SW-QGPK1DE8M8FB

  Availability: In Stock

  Our Price: $134.03

  Add to Wishlist
• 

  Henry Engineering PatchBox II Stereo Output Multiplier

  PatchBox II is a passive "output multiplier" that can be used to distribute the output of a professional audio mixer to the inputs of peripheral equipment. PatchBox II is ideal for feeding a mixer's output signal into DAT recorders, digital editors, computer sound cards, cassette and reel decks, VCRs, PA systems, dubbing racks, limiters, and other audio equipment. Both professional equipment with balanced inputs and consumer equipment with unbalanced inputs can be used. PatchBox II is compatible...

  

  Read More

  Item #: PATCHBOX

  Availability: In Stock

  Our Price: $159.00

  Add to Wishlist
• 

  My Custom Shop 16XLRF 16-Port XLR Female Patch Panel w/ Neutrik NC3FD-L-1 Connectors - 1RU

  My Custom Shop proudly builds audio rack panels and patchbays in their US facility using only quality components from suppliers such as Neutrik, Switchcraft, Canare, and Senko. With 20 years of experience in the custom metal plate and panel industry, My Custom Shop now offers a diverse variety of standard models in 1, 2, and 3RU sizes, with connector options including XLRs, RCAs, 1/4 and 3.5mm jacks, and more. Features: Specifications:

  

  3 Patch Points Available

  Item #: 16XLRF

  Availability: In Stock

  Our Price: $119.00

  Add to Wishlist
• 

  Switchcraft TTEZN10SLBX 1RU Front TT EZ Norm Rear Solder Lug Patchbay

  EZ Norm Series TT/Bantam audio patchbays utilize EZ Norm technology, allowing signal flow to be modified from the front of each channel using a standard screwdriver. Switchcraft's most popular EZ Norm TT patchbays come standard with easy access programmable grounds, making it possible to custom configure the ground setting of each channel to either vertically strapped or isolated. Features: Offers a simplified method for setting up and changing normals on a Bantam/TT patchbay Simply remove the...

  

  2 Types Available

  Item #: TTEZN10SLB

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $465.71

  Add to Wishlist
• 

  My Custom Shop CTX-16XFXM XLR Feedthrough 1RU Patch Panel 16-F Front / 16-M Rear

  A low cost feed through XLR panel featuring the popular Connectronics D-Type chassis mount barrel connector series. XLR Female on Front & XLR Male on Rear. No rear soldering required so installation time is cut in half!

  

  3 Patch Panels Available

  Item #: CTX-16XFXM

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $115.95

  Add to Wishlist
• 

  My Custom Shop CTX-16XMXF XLR Feedthrough 1RU Patch Panel 16-M Front / 16-F Rear

  A low cost feed through XLR panel featuring the popular Connectronics D-Type chassis mount barrel connector series. XLR Male on Front & XLR Female on Rear. No rear soldering required so installation time is cut in half!

  

  3 Patch Panels Available

  Item #: CTX-16XMXF

  Availability: In Stock

  Our Price: $115.95

  Add to Wishlist
• 

  Switchcraft StudioPatch 1625 - 16 Patch Points to DB25 with Programmable Grounds

  StudioPatch Series Bantam/TT Patchbays utilize Switchcraft's EZ Norm technology, allowing the signal flow of each channel to be instantly modified from the front of the patchbay using a standard screwdriver. Now, all StudioPatch Series Bantam/TT patchbays feature user programmable grounds, making it possible to customize each channel's grounding scheme with the flip of a switch. US Patent #7824201 B2 The 1625 is a modular, eight channel patchbay perfect for desktop or mobile applications where...

  

  Read More

  Item #: SW-1625

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $196.25

  Add to Wishlist
• 

  My Custom Shop NXLP-1 Pre-Punched Patch Panel for 8 Neutrik D-Type Connectors

  My Custom Shop Rack Panels are available in 1, 2 or 3RU sizes, and pre-punched for Neutrik D-Series connectors, Canare BCJ-Series connectors, feedthru barrels, or unpunched. Proudly built in our USA facility, our rack panels feature quality components, workmanship and detailed finishing to meet the needs of today's Pro AV, Pro Audio, and Broadcast industries. Specifications:

  

  2 Sizes Available

  Item #: NXLP-1

  Availability: In Stock

  Our Price: $29.95

  Add to Wishlist
• 

  2 Space Frame Kit w/Hardware

  A unique way to have custom panels without the cost or time of custom fabrication. Modules, bars and ears are stocked for immediate shipment. In-house engraving available. How It Works Assembles quickly and easily using either 2 or space frame kit or the UCP-CH Rackmount Chassis and your selections from the collection of prepunched modules corresponding to the connectors you need mounted (connectors not included). Modular assemblies simply bolt together using supplied hardware....

  

  5 Versions Available

  Item #: FK2

  Availability: In Stock

  Our Price: $45.00

  Add to Wishlist
• 

  My Custom Shop 16X 16-Port Unloaded D-Series XLR Rack Panel - 2RU

  My Custom Shop Rack Panels are available in 1, 2 or 3RU sizes, and pre-punched for Neutrik D-Series connectors, Canare BCJ-Series connectors, feedthru barrels, or unpunched. Proudly built in our USA facility, our rack panels feature quality components, workmanship and detailed finishing to meet the needs of today's Pro AV, Pro Audio, and Broadcast industries. Features: Black Textured Power Coated Panel Punched to work with any D-Series chassis connectors Specifications:

  

  3 Patch Points Available

  Item #: 16X

  Availability: In Stock

  Our Price: $39.00

  Add to Wishlist
• 

  Canare 322U Unloaded 32 Point XLR D Hole Patch Panel

  The Canare 322U A/V Bulkhead Panel is an unloaded 32 point XLR D Hole Patch Panel. Built specifically for Canare D Hole connectors the 322U is perfect for Edit Suites, Master Control Rooms, Headends, Satellite, Broadband and more. The Canare 322U will NOT work with Neutrik D Hole connectors, Canare only. Features: Isolated BNC, RCA, F, XLR on Same Panel. Flush Mount or Standoff Style Connectors. Strong 16 gauge Cold Rolled Steel (1.62mm)...

  

  Read More

  Item #: 322U

  Availability: In Stock

  Our Price: $86.37

  Add to Wishlist
• 

  My Custom Shop 16X-1 16-Port Unloaded D-Series XLR Rack Panel - 1RU

  My Custom Shop Rack Panels are available in 1, 2 or 3RU sizes, and pre-punched for Neutrik D-Series connectors, Canare BCJ-Series connectors, feedthru barrels, or unpunched. Proudly built in our USA facility, our rack panels feature quality components, workmanship and detailed finishing to meet the needs of today's Pro AV, Pro Audio, and Broadcast industries. Features: 1RU Panel Black Textured Power Coated Panel Punched to work with any D-Series chassis connectors Specifications:

  

  Read More

  Item #: 16X-1

  Availability: In Stock

  Our Price: $47.00

  Add to Wishlist
• 

  Canare161U Unloaded 16 Point XLR D-Hole Series Patch Panel

  The Canare 161U A/V Bulkhead Panel is an unloaded 16 point XLR D Hole Patch Panel. Built specifically for Canare D Hole connectors the 161U is perfect for Edit Suites, Master Control Rooms, Headends, Satellite, Broadband and more. The Canare 161U will NOT work with Neutrik D Hole connectors, Canare only. Features: Isolated BNC, RCA, F, XLR on Same Panel. Flush Mount or Standoff Style Connectors. Strong 16 gauge Cold Rolled Steel (1.62mm)...

  

  Read More

  Item #: 161U

  Availability: In Stock

  Our Price: $65.00

  Add to Wishlist
• 

  My Custom Shop CTX-16XFXF XLR Feedthrough 1RU Patch Panel 16 Female Front & Rear

  A low cost feed through XLR panel featuring the popular Connectronics D-Type chassis mount barrel connector series. XLR Female on Front & Rear. No rear soldering required so installation time is cut in half!

  

  3 Patch Panels Available

  Item #: CTX-16XFXF

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $115.95

  Add to Wishlist
• 

  UCP FK2 Swinging Frame

  This hinged version of our FK2 frame kit allows rear access to modules. Captive thumbscrews hold the frame closed. Kit includes a pair of threaded FK bars, hinged ear, captive thumbscrew ear, and all module mounting hardware. Occupies 2 rack spaces (3.5").

  

  Read More

  Item #: UCP-SF

  Availability: In Stock

  Our Price: $54.00

  Add to Wishlist
• 

  Rean NYS-SPP-L1-USA 48 Point TRS Balanced Patchbay

  1/4" Patch Panel with 2 rows of sockets, 24 front pairs and 24 rear pairs. 19" rack-mount and fully PCB-wired (24 vertical PC boards) without nut fastening. Identification strips incl. for front and rear panel. Specifications: Electrical Connector-contact resistance: < 10 mOhm Switch-contact resistance: < 10 mOhm Insulation resistance: > 2G Ohm @ 500 V dc Current rating: 1 A Dielectric strength: > 1000 V dc Crosstalk between upper and lower channel: > 100 dB @ 1 kHz Mechanical Jack...

  

  Read More

  Item #: NYS-SPP-L

  Availability: Extended Lead Time. Email, Chat or Call Us for more details.

  Our Price: $89.99

  Add to Wishlist

Newsletter Sign Up

Weekly email with exclusive deals, unique new products, how-to videos and so much more!

Download the Newest Catalog!

• A Must for all Broadcast & AV Professionals
• Exclusive & Custom Solutions
• The Best New Products
• Latest Industry Trends