-
Murideo
Item# MUR-MU-FXHDKIT8K
The 8K Fox & Hound Testing and Troubleshooting Kit
This 40Gbps Generator and Analyzer Testing Kit from Murideo was built as the ideal testing unit for all custom and commercial integrators. The Fox & Hound comes with a 40Gbps Generator and 40Gbps Analyzer. These tools allow you to confirm correct bandwidth, HDCP, resolution, timing, HDR metadata and many more options that could cause system hiccups if not treated correctly.
With devices like 8k displays and sources becoming normal for...
Our Price: $2,495.00
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List-
Fluke Electronics
Item# FLK-LIQ-KIT
The Fluke LIQ-KIT LinkIQ™ Cable+Network Tester is the solution to verify cable performance up to 10G and solve network connectivity problems.
LinkIQ™ validates cable performance using frequency-based measurements to calculate maximum bandwidth (10BASE-T to 10GBASE-T), which ensure that tested links meet performance requirements.
LinkIQ™ also provides nearest switch diagnostics including advertised data rate, switch name and port number and VLAN information, plus PoE...
Our Price: $2,995.00
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List-
DBX Professional Products
Item# DBX-CT3
The dbx CT3 is an advanced cable testing unit allowing you to evaluate a large variety of cables with ease. The CT3 offers many common connectors such as RJ45, RJ11, MIDI, Speaker Twist, XLR, RCA Phono, BNC, DIN, TRS, TS, DMX, & Banana. It can be split into 2 parts, a SENDER and RECEIVER so preinstalled and long cables can be tested.
How can you test a long Multicore or a cable which is inside a wall? How can you test a cable when you can't access both ends to...
-
Triplett
Item# BYB-LVPRO30
The LVPRO30 is the tool that does it all. This industry leading cable tester is the one tester you need to run a variety of cable testing procedures like, Cable Map, Ethernet Switch Port Blink, Speaker Pop, Cable Length, PoE Volts, Battery Test, 10/100/1000 indication & the ability to print results. The LVPRO30 allows you be the PRO in any cable testing situation
WALL JACK AND SPEAKER IDENTIFIERS:
Low voltage work also calls for wall jack identifiers... and speaker identifiers...
-
Triplett
Item# BYB-CTX200
The perfect tester for any toolbox. Performs a TIA568 test on Ethernet cable (RJ45) with instant pass/fail results. Ruggedized and cushioned for toolbox use with a hidden drawer for remote storage. Includes a tone generator compatible with most tone probes including Byte Brother brand. Features: Test both RJ45-CAT5/6 and coax cables
Ruggedized for field use. No LCD to break
Pass/Fail results appear in one second
Each pairs status is highlighted.
Complete TIA568 test performed. Continuity, opens/shorts,...
-
Connectronics
Item# CTX-TRIAX-TXT
A Tool No Truck Should Be Without!
Save thousands of dollars in overtime and frustration by verifying triax cable status right in the field - not back in your shop. You can test for opens and shorts between the center conductor and inner and outer shields using the CTX-TRIAX-TXT battery-powered cable tester. The separate base and remote unit design allows for testing cables that are already installed.
The two piece tester includes a transmitter (male) and...
-
Hosa Technology, Inc.
Item# HOS-CBT-500
The CBT-500 Cable Tester by Hosa Technology is designed to diagnose signal failure in terminated cables like XLR, Phone, Phono, and speakON® as well as DIN, Ethernet, and USB Type A to Type B cables. Equipped with removable leads to verify continuity of additional connector types operation only requires a single 9-volt battery. The Hosa CBT-500 makes it easy to check a slew of cable types and the re-designed tester allows you to verify the integrity of a...
-
SoundTools
Item# ST-XLR-SS
The SoundTool Sniffer and Senders are 'On the fly', highly reliable, testers with remote ends used in the field to quickly determine faulty XLR cables and for testing phantom power at various stages and locations. They can also be used to quickly test phantom power on snakes. The SoundTools SSXLR Sniffer is a single ended XLR male cable tester that utilizes phantom power or the SoundTools Sender as a test source. The SoundTools Sender is a battery powered XLR female tester that...
-
Luxi Electronics
Item# LXL-HDMITSK
The Luxi Electronics HDMI Troubleshooter Kit has everything you need to be picture perfect. One of the most common and puzzling symptoms of any HDMI based system is that the display has a flashing or snowy picture or no picture at all, even if the system is well designed and installed and each component was tested thoroughly. Usually this means the system doesn't have enough bandwidth or the cable is too long for the signal data rate. Another possibility is that the DDC (hand...
-
Black Box
Item# BBX-TS029A-R5
Black Box TS029A-R5 TVR 10/100/1000 Tester provides everything you need to verify and repair 10-, 100-, and 1000-Mbps copper Ethernet. The main unit that performs most tests such as LAN device type, LAN speed, duplex, and PoE. An additional probe enables you to locate cables or switch ports by detecting a tone generated by the handheld tester.
The tester enables you to locate faulty switches, PCs, or cable connections that may be interfering with the performance of your 10/100/1000BASE-T...
-
Tripp Lite
Item# TRL-T010-001-K
The T010-001-K Multi-Function Cable Tester is an essential tool for cable installers or anyone working in telecom or LAN environments. It allows you to test RJ45 (STP/UTP), RJ11, BNC and USB cable wiring, length, fault and location, as well as common metal wires using the included alligator clip adapter. For instance, you can test wiring for open, short, cross, reverse and pairing connection. You can also track the location of an open circuit position, and determine the length of...
-
Whirlwind
Item# SC48RJ
The SC48RJ Tester provides rapid, positive testing for NL4 and NL8 SpeakON type multiline speaker cables, RJ45 type data cables, EtherCON cables and XLR cables. Rotating the central switch applies voltage to the cable conductors one at a time. A SEND LED indicates the pin to which the voltage is being applied, and a RECEIVE LED indicates where it returns, clearly revealing, shorts, opens and cross-wires.
-
Belden
Item# A0270166
Belden A0270166 BIX Test Probe is a single-pair probe that clips onto the termination clip of BIX Distribution or BIX Modular Jack Connectors to facilitate testing
Features: Single pair probe with clips - red / black
Ideal for testing of BIX Distribution and Modular Jack Connectors
Multifunction
-
Platinum Tools, Inc.
Item# PLAT-4076
The Platinum Tools Inc. 4076 Net Chaser Protective Case will protect your Net Chaser equipment, withstanding incredible abuse in extremely harsh environments. Designed for durability, the Net Chaser Protective Case is molded from tough polypropylene and is rugged, lightweight, watertight, and airtight. A Perimeter O-Ring seals out the elements, protecting the contents from water, dust and other contaminants. This case will not chip, dent, or lose its finish. Features: Specifications:
-
Quasar Science
Item# QSI-DC-DDT
The Dynamite DC-DDT DMX Tester from Quasar Science is a pocket-sized device that allows every cable in your lighting array to tell you what DMX universe it is part of. Plug the Dynamite DMX Tester into a DMX line, opto-splitter, or node, tune to channel 512 by pressing both buttons, and instantly tell what universe is outputting to the tester. When the lighting system is set up properly using the 512 universe channel theory, simply plug in the tester into the DMX line, press both buttons,...
Our Price: $142.50
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Mackie Designs
Item# MCK-MTEST-1
Always Be Prepared
Whether you have a few or a mountain of cables, it pays to know which ones are good and which ones need to be tossed into the not so good pile. The MTEST-1 is an incredibly handy tool that can weed out the cables that may have seen too much action.
Never play the guessing game with cables again. Featuring a simple 5-way switch to test every pin, even with mismatched connectors, the battery-powered MTEST-1 is an essential tool to have in your...
-
SoundTools
Item# RSS-SSNL4
The SoundTool Sniffer and Senders are 'On the fly', highly reliable, testers with remote ends used in the field to quickly determine faulty NL4/Speakon cables at various stages and locations. They can also be used to quickly test phantom power on snakes.
Designed by Rat Sound to deal with the "real world" of pro audio, the SoundTools SSNL4 Sniffer cable tester is a amazingly simple and reliable tester with many unique features. Machined from durable aluminum tubing, the NL-4...
-
Palmer Audio
Item# PLM-AHMCTXL
As well as standard audio and video cables, the Palmer Pro AHMCT XL also tests the major data cables (USB, RJ45). The test sequence can be either automated or manual, meaning the Pro AHMCT XL from Palmer is as ideal for the layperson as it is for the engineer. The sturdy metal housing with practical handle effortlessly withstands even the toughest on-stage demands. Yet despite its impressive array of functions, it remains sufficiently compact to fit in any professional workshop or well-equipped...
-
Tripp Lite
Item# TRL-N044-000-R
Tripp Lite's Multi-Functional Network Cable Tester allows you to test wiring continuity for Cat5, Cat6, Phone and Coax cable assemblies. Identifies mis-wires, short circuits and open circuits. Features two piece transmitter and receiver, two BNC-F coax converters and coax terminator. Includes handy storage pouch when not in use. Power supplied by 9V Battery (not included). Features: Tests Cat5e or Cat6 cable connections
Tests coax cable connections
Tests phone cable connections
Two piece test unit...
-
SoundTools
Item# RSS-100009
The Sound Tools SS-DMX DMX Sniffer/Sender instantly tests 5 pin DMX cables in your stage lighting or theatrical control setups. Faulty cables are one of the most common issues in malfunctioning DMX networks, but testing them hasn't always been easy. The SoundTools SS-DMX DMX Sniffer/Sender simplifies the cable testing process so you can test your cables where they are in your setup and know instantly if your issue is cable or fixture related. The two-piece...
-
Atlona Technologies
Item# ATNO-AT-ETU-SYNC
The Atlona Etude™ Sync (AT-ETU-SYNC) provides EDID emulation and Hot Plug Detect communication between HDMI sink and source devices. It detects and corrects for signal integrity issues associated with cabling or connections, and can resolve compatibility problems between a source and sink. The Etude Sync is compatible with high dynamic range (HDR) formats and is HDCP 2.2 compliant. It supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to...
-
Rapco
Item# BB-SCT
The Rapco STBLOX is a speakon cable tester for testing shorts or open ciucuits on 4 pole speakon cables. NL4MP input and NL4MP output.
Features: Self-contained speakon cable tester
Tests 4 pole speakon cables
Tests for shorts or open circuits
NL4MP input and NL4MP output
Perfect size for your toolbox or even a shirt pocket
Black powdercoated aluminum chassis
Hand soldered connectors
Specifications: Dimensions: 3.5" x 1.25" x 1"
-
Coastel Cable Tools
Item# CT-6ST
The Coastel Cable Tools CT-6ST is a Coax Cable Tester that checks the continuity of coaxial cable runs. This small, simple tester is a fast way to determine if a coaxial cable is good, open or shorted.
-
Clark Wire & Cable
Item# CWC-CWT-SMPTE-T1
The Clark CWT-SMPTE is a two-piece test set designed specifically for testing both the fiber and copper elements of a terminated SMPTE 304/311 camera cable assembly. The fiber elements are tested for power loss and displayed in dB loss, while the copper elements are tested for multiple combinations of opens and shorts. Measurement are displayed on color touch screen display for easy viewing and operation.
Features: Measures Fiber Attenuation
Tests for Electrical Opens and Shorts
Includes...
-
Whirlwind
Item# DMX35T
The Whirlwind DMX35T cable tester checks 3 and 5 pin XLR DMX lighting cables and also indicates the presence of the DMX DATA signal when connected to a functioning control line. 3 pin XLR jacks also test microphone cables for opens, shorts or reversed connections.
