-
Canare
Item# DA-202
Canare DA-202 is the cable of choice for conveying digital audio signals in conformance with AES/EBU and IEC standards. 25 AWG conductors also allow it to be used with punch down block patchbays.
PE rod configuration ensures consistent 110-Ohm impedance with large or small bends in cable during installations.
Features: Twisted Pairs with Braid Shield
Special PE Filter Rods maintain constant 110 ohm impedance

-
Canare
Item# DA-202-328
Canare DA-202 is the cable of choice for conveying digital audio signals in conformance with AES/EBU and IEC standards. 25 AWG conductors also allow it to be used with punch down block patchbays.
PE rod configuration ensures consistent 110-Ohm impedance with large or small bends in cable during installations. Features: Canare digital audio cable is specially designed for use with all 110 Ohm AES/EBU XLR 3-Pin type equipment Good signal transmission performance allows for longer cable runs between...

-
Sescom
Item# 1800F-XMF-1
8 Lengths and 5 Colors AvailableDesigned to provide the latest in precision impedance and flexibility, these new digital audio interconnects will provide reliable performance with AES/EBU interfaces.
Featuring Belden 1800F "Super Flexible" digital patch cable, these tough assemblies include the best features for crush resistance, French Braid shielding and high density insulation which further reduces capacitance and propagation delay, allowing error-free transmissions over extended distances. Supports all devices that require...
Read More
-
Belden
Item# 8019
Belden 8019 is an 18AWG (Solid) Tinned Copper Buss Bar Wire sold by the foot.
Specifications: AWG: 18
Stranding: Soild
Material: TC - Tinned Copper
No. of Conductors: 1
Nominal Conductor DCR: 6.51 Ohm/1000ft

-
Blackmagic Design
Item# BMD-CABLE-ATEMAU
The Blackmagic Design BMD-CABLE-ATEMAUDIO ATEM Switcher Audio Breakout Cable is used to bring analog audio into an ATEM 1M/E or 2M/E switcher a Blackmagic Design Audio Breakout Cable is REQUIRED to interface with the switcher's DB-15HD connector. The breakout cable is approximately two feet long, terminating in six XLR connectors that support two channels of input and output audio, as well as timecode in and out. Each cable is shielded to protect your signals.

-
Sescom
Item# P/DXLM-F-6
7 Lengths AvailableConstructed with Gepco 5596TS Single Pair Low Cap Extended Distance for Digital Audio & Neutrik Black & Gold XLR Connectors.Plenum Cable is suitable for use in ducts, plenums and other space used for environmental air without conduit and has adequate fire-resistant and low smoke producing characteristics. Features: ASTM tinned copper
Teflon insulation
Short overall twist lengths
Required Polyester binders
Overall shield 100% coverage of aluminum polyester foil with stranded TC drain wire. Plenum...
Read More
-
Sescom
Item# SC3DXXJ
8 Lengths AvailableBuilt RoHs compliant with Neutrik 3 Pin XLR connectors and Canare DA-202 digital audio cable (Blue) and soldered with silver. Transmits high video-like frequencies. 300 meters are possible depending on equipment. Supplied with XLR male to female - other connector options & lengths quickly & easily assembled from our in-house cable shop!
Features: AES/EBU Digital Audio
Twisted Pairs with Braid Shield
Special PE Filter Rods maintain constant 110 ohm impedance
Read More
-
Sescom
Item# SES-AES-EBU-Y
3 Lengths AvailableWhen a simple solution is made simple to deploy, it is a winner on every job and that best describes our exclusive Digital Audio AES EBU XLR Y Splitter cable. This low cost cable is a state-of-the-art 1X2 digital audio splitter. Although it does not require external power as it employs our custom designed transformer to deliver performance with no apologies. This unit is fitted with high quality XLRs for I/O interface. Available in 6 Inch, 2 Foot and 6 Foot lengths.
Cables work with 44.1, 48,...
Read More
-
-
Whirlwind
Item# WW-AES-SP1X2
The Whirlwind AES Splitter 1x2 is a passive unit that delivers two identical AES/EBU signals from a single stream. The design utilizes a dual secondary transformer on the input and a separate isolation transformer for each output. With the three-transformer circuit, the Whirlwind AES-SP1X2 maintains excellent data integrity and high amounts of isolation between outputs.
