Cloud Electronics VMA120 120 Watt Integrated Mixer Amplifier - 4 Ohm or 25/70/100v

ITEM #: CLE-VMA120 MFG #: VMA120

Primary Image
  • Product Image Thumbnail 1 of 2
  • Product Image Thumbnail 2 of 2
Free Shipping with $49 Minimum Order

Item unavailable. Please select another option.

Ask a Markertek Expert if you need assistance finding an appropriate substitute.

List Price:

$482.00

Our Price:

$433.00

Availability: In Stock
iAvailability Description Popup


    VMA120 - Overview

    The Cloud VMA120 and VMA240 are cost-effective mixer-amplifiers for use in all types of commercial premises. They have been designed to be as simple to install and operate as possible, but offer a useful range of features and configuration options.

    The units are mono power amplifiers combined with a simple mixer stage. The two models are identical in terms of facilities, and differ only in the maximum power output available - 120 W or 240 W respectively. They may be used to drive either low-impedance loudspeakers directly (4 ohms minimum) or 25/70/100 V-line loudspeaker distribution systems. The two different types of speaker system cannot be driven simultaneously. A highpass filter, selectable by internal jumper, minimises the effect of transformer saturation at low frequencies when driving 25/70/100 V-line systems.

    The units have four stereo line inputs (typically for connection of music sources), including an AUX input in the form of a 3.5 mm jack socket on the front panel to permit the easy connection of laptops, tablets and similar devices. Two balanced microphone inputs are also provided: phantom power is available at each, selectable by internal jumper. A high-pass filter for each mic input may also be selected by internal jumper: this reduces the effects of handling and breath noise. All mic and line inputs (except the AUX input) have a preset-type gain control adjacent to the input connectors on the rear panel.

    • Features:

      • Power output: 120 W/channel
      • Outputs suitable for either low-impedance (min. 4 ohm) or 25/70/100 V-line systems
      • Four stereo unbalanced line inputs (3 x RCA jack pairs, 1 x 3.5 mm TRS jack on front panel)
      • Rear panel line inputs have individual gain controls
      • Two balanced mic inputs (1 x multipin connector, 1 x 1/4" TRS jack), with individual preset gain controls
      • Front panel controls for mic and music levels, line input selection, mic EQ, master level and EQ
      • Mic input mute switches on front panel
      • Line 1 priority, enabled by front panel switch
      • Mic-over-music priority, enabled by front panel switch
      • 15 V phantom power available at either mic input
      • 100 Hz high-pass filter on each mic input
      • 70 Hz high-pass filter in output stage, for use with 5/70/100 V-line systems
      • Fixed limiter - prevents clipping
      • Front panel LED bargraph - indicates output signal level
      • Over-temperature and output DC protection
      • 230 V or 115 V operation
      • Forced-air cooling
       
    • Specifications:

      • Line Inputs
      • Frequency Response: 20 Hz to 20 kHz, ±1 dB
      • Gain range: 0 dBu to +20 dBu
      • Input impedance: 47 kohms
      • Noise: <-82 dB (22 kHz bandwidth)
      • Equalization: LF: ±10 dB @ 50 Hz HF: ±10 dB @ 10 kHz

        Microphone Inputs
      • Frequency Response: -3 dB @100 Hz (fixed filter) to 20 kHz, ±1 dB
      • Gain range: 2.45 mV (-50dBu) to 245 mV (-10 dBu)
      • Input Impedance: 3.3 kohms (balanced)
      • Phantom Power: 15 V, switchable per-input by jumpers
      • Noise (EIN): -125 dBu (20 Hz to 22 kHz bandwidth, max gain, Rs = 150 ohms)
      • Equalization: LF: ±10 dB @ 100 Hz; HF: ±10 dB @ 5 kHz

        Main Output
      • Output Power (1 kHz continuous sine wave): 120 watts
      • Minimum load: Low-Z output 4 ohms / High-Z output: 25 V-line 5.2 ohms / 70 V-line 41 ohms / 100 V-line 83 ohms
      • Frequency response: Low-Z output 20 Hz to 20 kHz, ±1 dB, High-Z output 20 Hz to 20 kHz, ±1 dB (70 Hz filter off)
      • THD + N: < 0.08% @ 1 kHz
      • Protection" Fixed level signal limiter: DC and over-temperature protection

        Auxiliary Output
      • Nominal output level: 0 dBu (0.775 Vrms), balanced
      • Noise: <-82 dB, 22 kHz bandwidth

        General
      • Power input: Selectable 115 VAC or 230 VAC, ±10%; 45 - 65 Hz
      • Fuse details: 5 x 20 mm, time delay: 230 V models 2 A / 115 V models 4 A
      • Normal operating temperature: 0 °C to 35 °C (Note: performance and specifications cannot be guaranteed outside of this range)
      • Cooling: Forced air cooling, 80 mm dia. fan; airflow front-to-back
      • Power Consumption: Idle - 13.5 W (19.2 VA) / 1/8th Power - 88.6 W (119.7 VA) / 1/3rd Power - 136.5 W (177.7 W)
      • Heat Loss: Idle - 48.7 KJ/hr (46.1 BTU/hr) / 1/8th Power - 276 KJ/hr (262 BTU/hr) / 1/3rd Power - 407 KJ/hr (386 BTU/hr)
      • Dimensions (W x H x D): Net - 19" x 3.5" (2U) x 10.5" / Shipping (Gross) - 21.1" x 7.3" x 13.8"
      • Weight: Net - 17.7 lbs / Shipping - 23.5 lbs
       
    • Item Includes:

      • 1x Cloud Electronics VMA120 120 Watt Integrated Mixer Amplifier 4 Ohm or 25/70/100v
       

    VMA120 - Required Accessories

      California Residents:
      WARNING:
      Cancer and Reproductive Harm - www.P65Warnings.ca.gov