-
Item# ART-DIGMPAII
The all new ART Digital MPA-II delivers all of the same great features of the ProMPA with the added versatility of digital output. Like the ProMPA-II, each input circuit has 48v phantom power and features variable input impedance which can radically vary the overall performance of any high quality dynamic or ribbon microphone. The Digital MPA-II can be configured for dual mono or stereo operation with selectable mid/side mic support, summing the adjacent channel, to decode left/right signals.
...
-
Item# ART-DJPRE2
The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable rumble while leaving the audio pristine. The front gain trim control and signal/clip LED allow you to optimize the preamp's gain for a wide range of input sources. The built-in low noise phono preamp circuitry...
-
Item# ART-DRP
The ART Dual RP Mic Preamp is the ideal solution for increasing the performance of your ribbon and dynamic microphones. This two-channel preamp brings out all of the nuances of your mic before running into your recording interface or mixer via long cable runs.
With the Dual RP you can tailor the loading on the mic through the variable impedance controls. The discrete preamp circuitry inside is designed for low noise and transparent operation. The balanced output drives long cable runs...
-
Item# ART-HVA1
2 Channels AvailableThe ART HVA Series 1 is a class-D installation amplifiers. It is suitable for both 70/100V line installations (selectable through dip-switches). Each channel has its own gain control and LED indicators (signal, clip and protection). The input and output connections are made through Euroblock connectors. The amplifiers are a 1U rack 19-inch size is very appropriate for many types of installations, taking advantage of its multichannel design.
HVA1/HVA4 has a variable speed internal cooling...
Read More
-
Item# ART-MX225
The MX225 is designed for remote volume control of multiple amplifiers or powered speakers in a distributed audio system. Two stereo sources are available to each of five output zones. Each source input pair handles separate left and right balanced line level signals. Each output zone features independent level control from inputs 1 and 2, stereo/mono selector with mono indicator, LED level metering, and left and right balanced line level zone outputs. All audio connections are balanced XLR. The...
-
Item# ART-MX624
The ART MX624 Six Channel Stereo Mixer with Two Zone Outputs is a versatile rack mount mixer that combines six independent input channels and routes them to two stereo zone outputs.
The first channel can be used to control, via a front-panel switch, a ducking feature for all other channels making it an ideal solution for paging systems. All six channels can accept unbalanced stereo line-level signals. 48v phantom power can be independently assigned for each mic channel. Each channel has independent...
-
Item# ART-RP-1
For those seeking a single channel preamp to improve the performance of ribbon and dynamic microphones, the ART RP-1 Mic. This preamp brings out all of the nuances of a microphone before running into your recording interface or mixer through long cable runs.
With the RP-1 the user can tailor the loading on the mic through the variable impedance control. The low cut filter allows the removal of wind noise and plosive before adding additional gain. The discrete preamp circuitry inside is...
-
Item# ART-SCC
The ART SCC (Studio Control Center) is the ideal compact solution allowing you to take complete control of your studio space. Three selectable stereo sources can be quickly and easily routed to any or all of three sets of stereo balanced outputs from the front panel. Sources can be individually selected or blended from the front panel. Separate trim pots ensure proper levels between sources can be preset. A large single volume knob controls the overall output level of the system.
A separate cue...
-
Item# ART-USBDUALPRE
The USB Dual Pre is a full-featured high quality dual portable preamplifier and computer interface packed into a compact rugged case. It is designed to work over a wide variety of applications from remote field recording to desktop/studio tracking. Each of the two low noise input channels has up to 48 dB of clean gain with signal present and clip LED indicators. Inputs can be either XLR balanced or 1/4-inch TRS. Each of the 1/4-inch TRS outputs is buffered low impedance balanced.
The USB Dual...
-
Item# ART-USBPHONOPPS
The USB Phono Plus is the ideal low cost interface solution for transferring any analog or digital audio source, including a turntable into a computer via standard USB connection. Building on the success of the two previous iterations, the ARTcessories DeeJayPre and the USBPhonoPlus, the USBPhonoPlus v2 adds more convenient pre or post monitor source selection and a variable headphone level control to the already successful low noise RIAA standard A/D interface package.
The USB Phono Plus is...
-
Item# ART-VCHAN
The ART VoiceChannel is the perfect complete channel input strip for recording, broadcast or high profile live applications where maximum performance and detail is required. Designed to deliver in critical applications where full control of the audio source is required, the VoiceChannel combines a single Class-A tube mic preamp, full-featured dynamics control, De-esser, expander and semi-parametric EQ into one unit with analog and digital output as well as the ability to direct connect to any computer...
-
Item# PRECISIONPHONOPR
ART is proud to introduce the Precision Phono Preamp for those seeking to connect their turntable to PA or stereo in one quick and easy step. This standalone phono preamp interfaces both types of turntable cartridges Moving Coil (MC) and Moving Magnet (MM) to a wide variety of audio systems.
The Precision Phono Preamp's extraordinarily low noise amplifier allows connection to MC cartridges without picking up noise or distortion that transformers can exhibit. The audio is kept pristine...
-
Item# STUDIO-V3
he Tube MP Studio V3 features ART's new V3 (Variable Valve Voicing) Technology -- found only in ART microphone preamplification systems. V3 provides optimized reference points to begin the recording process. The V3 presets were created and fine-tuned by some of the industry's top studio and live-sound engineers, along with our veteran engineering department. V3 allows you to select between a multitude of preamp settings designed for guitars (electric and acoustic), keyboards, bass guitars, drums,...
-
Item# TUBE-MP
The Tube MP is the world's most popular external tube microphone preamp. Whether you're working with a four-track, hard-disk, or digital multitrack recorder, the Tube MP's TEC award nominated design will allow you to obtain professional recording studio results at a fraction of the cost of comparable equipment. The hybrid design of the Tube MP allows it to add warmth and fatness to a signal while maintaining exceptionally low-noise and high quality. While its primary application is to be used with...
