-
Item# BURST-PXFS
The Pixie-FS is a Frame Store/TBC unit that is the size of a deck of cards. The Pixie-FS is a full feature 8-bit frame store including proc amp control. Adjustments for gain, color and timing. The Pixie-FS is dual standard, operating in either NTSC or PAL. Features: Full Frame TBC
Adaptive Comb Filter Decoding
Input Anti-aliasing Filters
Multi-standard NTSC/PAL
Genlock
Y/C
CVS Transcoding
Instant Recall of Factory Preset Levels
RS-232 Status and Control
Composite or S-Video (?)
Genlock...

Our Price: $750.75
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# C2YC
The C2YC converter accepts Composite video and splits the signal into the Luminance "Y" and the Chroma "C" components or S-VHS (S-Video). Send a Composite video signal to the Video Input connector (BNC) on the rear panel. The separated "Y" and "C" video signals are obtained from the "Y/C Output" connector on the rear panel. The "Y" and "C" output is 75 Ohms and utilizes a standard 4 pin S-Video din connection.
Specifications: Input/Output: 1 Volt Standard Video.
Input Connector: Composite Video,...

Our Price: $289.00
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
-
Item# ADA-4B
The ADA-4B is a stereo in, four output balanced audio distribution amplifier. These units use the latest in high speed, monolithic operational amplifier technology. This results in wide bandwidth, low noise and low distortion. All units contain internal regulated bipolar power supplies and are powered by external 12 Vdc, perfect for field or studio applications. Each of the four outputs is a separate buffer amplifier resulting in a high degree of isolation between outputs.
Specifications: Input...

Our Price: $322.09
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# SG-2B/N
The SG-2 Black Burst Generator is a single output unit. The output, which contains composite sync, color burst and 7.5 IRE setup (0 IRE in PAL) is a standard 1 Volt Video signal. The SG-2 is used to drive Genlock inputs, laydown "black" on tape, or feed a DA to distribute house black.
Second Generation: A redesign of one of our best sellers. Now the waveform is digitally generated under microprocessor control, providing precise purity. Specifications: Output: 1 volt standard video NTSC (PAL)
Output...

Our Price: $204.75
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# PS-5
The Burst PS-5 is 5Vdc 100-240Vac 50 to 60Hz power supply.

-
Item# RC-8X1
Optional remote control for Burst DSR8x1. It is a separate device with illuminated switches for selection between inputs.

Our Price: $333.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# AS-4X1
2 Versions AvailableThe AS-4X1 is a four stereo input, one stereo output audio switcher. The AS-4X1 includes an internal monitor amp and speaker. The monitor amp can drive external headphones or stereo speakers. It also features a peak LED indicator for each channel to guard against input overload. The 50kHz bandwidth and 85dB S/N assures clean audio. The inputs and outputs are unbalanced line level type with phono (RCA) connectors. RS-232 remote control is optional. DC powered for field applications.
Read More
Our Price: $295.75
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# RM-2-2
Burst Electronics RM-2 Rack mount for AV8x1P - Holds 2 Units Side by Side - 1RU

-
Item# RM-3
Rack mount for "Third Wide (T)" units. Holds three units side by side. One unit high.

-
Item# RM-344
Rack mount. Holds one "Third Wide" unit and two "Quarter Wide" units

-
Item# RM-4
Rack mount for "Quarter Wide (Q)" units. Holds four units side by side. One unit high.

-
Item# RM-6
Burst RM-6 Rack Mount for 6 Units

-
Item# RM-EAR
Rack ears (pair) for VS8x8, AS8x8

-
Item# RM21
Burst RM-2-1 Rack Mount for 1 AV8X1P Unit

-
Item# SG-3/N
Outputs Composite Color Bars or Black
Includes Black and 100% White
Stable Sync Genlock source
Allows Color and Hue (Phase) to be correctly set on monitors
Pluge Pulse (Black) for setting Monitor Brightness
Short Circuit Protected
Compact Size
Lays down reference "bars" on tape
Rugged aluminum and steel case
Power supply included
3.58MHz NTSC Standard with BNC connectors
One year warranty, made in USA.

Our Price: $658.15
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# SG-7
2 Types AvailableThe SG-7 Color Bar/Black Burst Generator is a low cost generator that produces one output of SMPTE Color Bars and six outputs of Black Burst. The SG-7 is designed to provide genlock signals for a variety of video equipment such as source decks, edit controllers, mixers, SEGs, cameras, etc. With the addition of the SG-7 to your Edit System, all equipment is genlocked to one source. The SG-7 may be used to "lay down" bars on tape, or to correctly set the color and brightness of video monitors. The...
Read More
-
Item# BURST-BG2
4 Models AvailableIf you need to switch quickly and operate in both NTSC and PAL, Composite and Y/C (in the same generator) and have Full Field Color Bars (option) the BG Series is the answer. Rack mounts available plus tone (either balanced or unbalanced) add to the flexibility. The Burst BG-2 and BG-2CB are a new generation of Black Burst Generators. Each unit has two video outputs that are digitally generated by an internal microprocessor and a A/D converter. This allows precise waveform generation meeting the...
Read More
Our Price: $227.50
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# BURST-BG2-12V
The BG-2 (and BG-2CB) are a new generation of Black Burst Generators. The BG-2 has two video outputs that are digitally generated by an internal microprocessor and an A/D converter. This allows precise waveform generation meeting the requirements of the most demanding applications. Can be configured as either composite or Y/C or both (option).
The BG-2 is simple to use. Connect the unit to the included 5Vdc power supply and push the Power switch up. The green LED on the front of the unit lights...

Our Price: $269.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# BURST-BG3
6 Models AvailableThe BG-3 (single output) and the BG-7 (single pattern output plus 6 black burst outputs) are video multi-pattern generators with the ability for the user to import a graphics file and overlay that image on the pattern output.
Applications include source ID in studio and mobile applications.
A 24-bit full color graphic is created with any paint program and loaded into the BG-3/7 via a front-panel USB 2.0 port. Once stored in the unit, the graphic image is overlaid on the pattern output. There...
Read More
Our Price: $671.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# BURST-BG4
2 Models AvailableThe BG-4 Black Burst Generator has four microprocessor controlled, digitally generated, stable black burst outputs suitable to drive Genlock inputs of the equipment in an edit suite. There is also a 1 kHz tone output, either balanced or unbalanced. The Model BG-4CB includes selectable black burst / full field color bars, plus NTSC/PAL operation.
Note: Please indicate your tone programming preference (balanced or unbalanced tone) in the Comments section during...
Read More
Our Price: $315.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# BURST-BG5
4 Models AvailableThe BG-5 (and BG-5CB) are a new generation of Black Burst Generators. The BG-5 has five video outputs that are digitally generated by an internal microprocessor and an A/D converter. This allows precise waveform generation meeting the requirements of the most demanding applications.
The BG-5CB includes the features and specification of the BG-5 plus Full Field Color Bars and user switchable NTSC/PAL dual standard. An internal Tone Option is available for $70.00 extra - add T to part number. The...
Read More
Our Price: $313.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# TC-3
2 Types AvailableThe TC-3 SMPTE Time Code Generator/Reader allows the standard Video SMPTE Time Code to be generated on and read from 8mm, 1/2", 3/4" or 1" tape. Features include ability to generate window dubs, drop frame and field 1 indicator, plus a jam sync mode. The high legibility characters have user adjustable position and size, allowing for flexibility in the video display. The TC-3 also has selectable auto backtime of 0:30, 1:00, 1:30 and 2:00 minutes. The longitudinal time code can be recorded on an audio...
Read More
Our Price: $434.34
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# BURST-DV-4
The DV-4 is a true 10-bit Analog to SDI converter. Features include full proc amp control of the incoming analog video, allowing for corrections and adjustments. The DV-4 supports all popular analog formats in NTSC, PAL, and SECAM. The input section has anti-aliasing filters that allow clean conversion of satellite and ENG sources. Internal color bars and Pathological generators add to the functionality of the DV-4.
Features: Full 10-bit processing throughout
Supports ALL popular baseband analog...

Our Price: $843.53
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# BURST-DG4
The DG4 is a full featured, multi-pattern, multi-format, SMPTE 259M (SD) and SMPTE 274M/296M (HD) SDI test pattern generator with 16-Channel voice ID's and tones plus analog genlock input and analog black-burst output. The pattern lineup was specifically chosen to expose system weakness and limitations. The moving zoneplate is used to qualify video compression and scaling. The pathological pattern is used to stress the PLL's in the signal path. There is even the traveling image which moves smoothly...

-
Item# YC2C
Burst YC2C YC to Composite Video Converter
Features: The Y2C2 converter accepts a Y/C input and outputs a composite video 1 volt standard signal
The format of the input is of the S-VHS or Hi8 type
The Y2C2 is 12Vdc powered, wall module included
Options available: PAL

Our Price: $185.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List