-
Our Price: $1,236.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Our Price: $1,114.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# BS-MAG-EN
This Magliner Narrow 8" Wheel Kit is a kit developed because Europeans needed an industrial grade cart that would fit through traditional thinner doors. Outfitting your cart to prepare for the future is not a short term plan, but a long term one. This kit includes 8" swiveling tube type tires and all the mounting hardware. It compensates for European households by whether slimming down to 20" wide. That's about 7.5" less than the standard wheel kit. Because of this, both 24" wide and 18" shelves...
Our Price: $221.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# BS-MLTH
The Backstage Tripod Holder accepts Standard and Baby motion picture tripod legs. The tongues are on hinges for easy stowing. Drilling the 30" nose extension is required. The holder is designed to fit on all 30" nose extensions installed on all Magliner and Libertor carts. Note: An upper shelf is required to keep the nose vertical.
Our Price: $174.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# BS-MAG-SH-JR
The MAG-SH JR unit anchors to two 5/8" Baby Pins at each end of the cart (MAG-NP CTR and MAG-S). You can use as many "Snap-On" 5/8" Baby Pins (TR-04 SHP) to run along the length of the bar allowing you to install up to three (3) 17" Monitors side by side.
Note: You may offset the Monitor Horizontal Cross Bar 8 1/4 inches towards the back or front of the cart by using two Offset Arms (MAG-V OS).
Features: Specifications: Material: Steel
Color: Black
Max. Capacity:...
Our Price: $152.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# BS-B-02T
This is the Backstage B-02T triple compartment net basket. Attaches to Super Duz-All, Grip Senior, Grip Junior and 4 X 4 Coaster Carts.
Features: Holds: (26) 24" x 36" Flags
Triple compartment
Attaches to: Super Duz-All, Grip Senior, Grip Junior and 4 X 4 Coaster Carts Specifications: Physical characteristics
Material: Steel
Colour: Gray Hammertone
Maximum Capacity: 68kg
Dimensions (D x W x H): 362 x 705 x 762 mm (14" x 27" x 30")
Weight: 12.5 kg (27 lbs)
Our Price: $441.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# BS-G-01-MINI
The Backstage G-01-MINI mini frame Film and Television equipment cart. Features: Holds (28) 4 x 4 Flags
Holds (2) Full Size Reflector Boards
Top Gel Storage Pan (L 51 3/4" x W 20 3/4" / (L 131.5cm x W 52.7cm)
Wheels: (2) 8" Swivel Casters with Brake & (2) 8" Rigid Wheels Specifications: Physical Characteristics
Material: Steel
Colour: Black Hammertone
Maximum Capacity: 364kg
Dimensions (D x W x H): 1397 x 533 x 1600 mm (55" x 51" x 63")
Weight: 62kg (136 pounds)
Our Price: $1,373.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# BS-MAG-CB-LK
The Mag Cross Bar with lock must be installed when using a Middle Shelf on any modified Magliner. It can be adjusted at any height within the U-Handle, this feature will allow the user to set the Middle Shelf at different heights. Note: Must have Mag 30" HD Adjustable Nose on other side to make this possible.
Shelves not included! Features: Material: Steel
Color: Black
Max. Capacity: 200 lbs.
Weight: 2 lbs.
Dimensions: D3 3/16" x W17" x H2"
Requirements: Magliner (Modified)
Conflicts:...
Our Price: $107.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# BS-MAG-DT-AL
The Magliner MAG-DT AL all aluminum Dove Tail Mount comes equipped with the Mag Universal Dove Tail Plate, unit will accomodate any Quick Release Plate. Unit can be mounted towards the front or rear of cart. It comes equipped with universal Front Box mounting screws.
Features: Alll Aluminum construction
Specifications: Material: Steel/Aluminum
Color: Black/Red Anodize (Plate)
Max. Capacity: 200 lbs.
Weight: 11...
Our Price: $359.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# BS-MAG-EU-100-AL
The Magliner MAG-EU 100 AL all aluminum 100mm Euro Ball Mount comes equipped with the Mag 100mm Plate. Unit can be mounted towards the front or rear of cart. It comes equipped with universal Front Box mounting screws.
Features: All Aluminum construction.
Specifications: Material: Aluminum
Color: Black/Red Anodize (Plate)
Max. Capacity: 200 lbs.
Weight: 13 lbs.
Dimensions: L12 1/4" x W16 7/8" x H4...
Our Price: $429.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# BS-MAG-FB
The Magliner Front Box is the perfect add on to your Magliner cart to organize all your gaffer needs. Simply attach it to the front box adapter found on the Mag Mitchel Mount or the Mag DoveTail mount (required, sold seperately) . If you don't have the Mitchel or DoveTail mount you can simply hang it off the edge of the top shelf of your Junior or Senior cart using the Mag Front Box Adapter (sold seperately, part# BS-MAG-FBA ). Made of all natural wood and has a 20 lb. weight capacity.
Our Price: $275.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# BS-MAG-FBA
The Magliner Front Box Adapter is a must have for adding the Magliner Front Box to your Magliner cart. For those of you that don't have or don't need a Mag Mitchel Mount or the Mag DoveTail mount then use this adapter and simply attach it to the front box and hang it off the edge of the top shelf of your Junior or Senior cart. 20 lb weight capacity.
Specifications: Material: Steel.
Color: Black.
Max Capacity: 20 lbs.
Weight: 1 lb.
Dimensions: 3/4" D x 4" W x 1" H
Our Price: $52.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# BS-MAG-HUP
The U-Handle Offset Baby Pin (Offset) was designed to to work together with the Mag Lap Top Tray and the Mag Lap Top Tray Swing Arm. It allows the user to adjust the height and position of the Lap Top Tray. Very useful when sitting down and moving about your cart. Features: Specifications: Material: Steel
Color: Black
Max. Capacity: 50 lbs.
Weight: 1 lb.
Dimensions (D x W x H): 4 1/2" x 2" x 2 3/4"
Our Price: $84.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# BS-MAG-LTA
The Magliner MAG-LTA Laptop Swing Arm provides a 5/8" baby pin at the end of the swing arm for attaching items such as the Mag Laptop Tray. As stated on the title, this arm was specially designed for laptops. The Swing arm is made of steel and is black in color.
Specifications: Max. Capacity: 30 lbs
Weight: 2 lbs
Material: Aluminum
Dimensions (W x D x H): 16.38" x 1.87" x 4.63" (Extended)
Dimensions (W x D x H): 8" x 3.5" x 4.63" (Folded)
Our Price: $152.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# BS-MAG-LTP
The MAG-LTP Mag Lap Top Tray is made of 3/16" aluminum with 1/4" hole every one inch to help in dissipating heat from your Lap top. This item has an opening in the rear to run your cables through and a stop bar at the bottom edge to help secure your Lap Top. The tray has an adjustable swivel mechanism that enables you to position your Lap Top at any angle. It comes with a 5/8" baby receiver that will fit into any standard 5/8" Baby Pin Device. Specifications: Material: Aluminum
Color:...
Our Price: $476.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# BS-MAG-M-AL
Magliner MAG-M AL Mitchell Mount with all aluminum construction. Same as our standard Mitchell Mount but much lighter. Unit will accomodate any 16 or 35 mm camera fully equipped. Unit can be mounted towards the front or rear of cart. It comes equipped with universal front box mounting screws.
Features: All aluminum construction.
Specifications: Material: Aluminum
Color: Black/Red Anodize (Plate)
Max. Capacity: 200 lbs.
Weight:...
Our Price: $379.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# BS-MAG-N-HD40-A
If you are planning to use a Middle Shelf, Magliner highly recommends the 40” HD Adjustable Nose, you will have the ability to use up to twelve different settings to control height positions. Top Nose Cross Bar and Adjustable Nose Cross Bar include Shelf Safety Lock receivers. Unit comes pre-drilled to accept all Nose accessories, such as: Tripod Holder, Steadi-Cam Vest Holder, Mag Monitor Arm Nose Adapter & Nose 5/8” Baby Pins. Features: Specifications: Material: Aluminum
Color: Natural Aluminum
Max....
Our Price: $241.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# BS-MAG-VT
Magliner MAG-VT is the same as the Mag Video Dual Bracket in size, but able to adjust the width depending on the size of the monitors you are using. There's three presets with built-in push buttons for quick release and lock. Unit also has hand prongs should you need a specific width. Unit extends from 16 1/2 inches to 24 inches. (Pin to Pin).
Specifications: Weight: 3 lbs
Dimensions: 19 x 7 x 5 in
Material: Steel
Color:...
Our Price: $232.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# BS-MAG-W-05-BR
The BS-MAG-W-05-BR is a single caster brake kit for the 5 Inch Magliner Swivel casters found on Gemini carts. Wheel not included.
.
-
Item# BS-MAGCJR
BS-MAGCJR - 18" Aluminum Top Shelf
Dimensions: 36 3/4" x 18 1/4" x 1 1/4"
Weight: 12 lbs.
Our Price: $219.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# BS-MAGDAJ
BS-MAGDAJ - 24" Aluminum Bottom Shelf
Dimensions: 36 3/4" x 24 1/4" x 1 1/4"
Weight: 14 lbs.
Our Price: $208.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# BS-MAGLCDLDMABKX
The LCD Arms accommodate big LCD monitors and flat panel displays. You’ll never twist a knob or push a lever. Simply float your plasma or LCD monitor with fingertip ease from one position to another. Tilt Head allows screen rotation from landscape to portrait mode and tilts back past 90 degrees or downward 44 degrees. Arm is easily removed from cart by loosening hand prong.
Please Note the Following!
Requirements: Mag Top Shelf, Mag Top Shelf Safety Lock, Apple...
Our Price: $339.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# BS-MAGZ58L
Magliner MAG-Z 58-L Left Wheel Axle Bracket
Our Price: $14.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# BS-ML8W
The Magliner 8" Wheel Conversion Kit (Standard) is still one of the favorites out in the Film and Video industry today. More and more
technicians are adapting other type of wheels, such as the Skateboard Wheel Kit, Sand/Dune Wheel Kit, and the Dual Wheels.
Note: All Wheel Conversion Kits are now equipped with the wheel sliding bracket option which allows you to interchange between Sand/Dune Wheels (Not Included), Track Wheels and Dual Wheels (Not Included).
Specifications: Material: Steel
Color:...
Our Price: $241.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# BS-ML9MH
The trays tilt and lock off solid. They have a standard 5/8" baby receptical and mount on any baby pin, are made of welded aluminum, black powder coated, and have grey carpet.
Our Price: $182.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
