-
Item# MSE-H386021
Hollywood Junior Stands are designed for larger lighting fixtures; built with steel legs and steel riser assemblies.
Our Price: $336.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# MSE-PANELSTAND
The Matthews PANELSTAND is a strong, lightweight crank stand with low profile legs for clearance of long, wide, or low hanging panel lights, balloon lights, large monitors, LED screens, overhead frames, and backdrops. The stand comes equipped with a balanced & built-in carry handle for transport and will fold up tight for storage. The main column can be adjusted and lowered at the leg base. The low rolling base makes it possible to roll underneath furniture, vehicles, and many other set ups...
Our Price: $811.69
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# MSE-756040
Century Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial lighting, the stages would revolve to allow for continuous overhead lighting from the sun. Large reflectors would be positioned to bounce back or kick the overhead light up onto the stage and illuminate the set and actors. These reflectors were made in many sizes, but it seems the most...
-
Item# MSE-259535
4 Sizes AvailableMatthews Apple Boxes are one of the most ubiquitous and useful pieces of equipment on a film set. They are used for anything that needs to be propped up or supported temporarily. They can be used to prop up furniture and light stands, for leveling camera dolly track, or to provide temporary seats, workbenches, or stepladders.
You can nail wall plates to them to hold low angle lighting fixtures and a multitude of other purposes. Matthews Apple Boxes are constructed of industrial grade plywood.
Often...
Read More
-
Item# MSE-B377709
The Matthews Schedule 40 Aluminum Pipe B377709 Menace Arm kit provides the ability to boom a lighting fixture into position while keeping the light stand out of camera view. The system can also be configured to hold cameras and gimbals with optional adapters. The kit is available in black and works with standard 1¬" speed rail (inside diameter). The rear counter weight mount includes top and bottom D-rings for ratchet strap connection to the bottom of the stand in lieu of the counter weight...
Our Price: $141.70
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List-
Item# MSE-H386027
Junior & Senior Stands: Designed for larger lighting fixtures these stands are built with steel legs and steel riser assemblies. These stands provide a stable rolling base for Junior and midsize lighting fixtures. Equipped with universal 1 1/8" Posi-V-Lock female with pop up 5/8" male receiver. The Senior Stands are made for fixtures weighing up to 88 pounds while the Brace Stand has three additional braces on the center column for increased support of heavier fixtures. Specifications: Maximum Height:...
Our Price: $382.00
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List-
Item# MSE-861862
CNC machined from 6061T-6 aluminum billet, Matthews now offers the strongest, most versatile and compact monitor bracket available. Because it is not a casting, this bracket will support any size monitor that does not exceed 65 lbs (20 kg). Works with light stands, C-stands, or any other mounting device with a 5/8" baby pin. Folds flat to monitor for storage and transportation.
For larger monitors use the Adapter Plate MSE-861863.
-
Item# 429619
Need to hang lights in tight spaces? The Junior Pipe Clamp is the perfect answer! It features a uniquely designed hook that's fully molded into the clamp. That hook helps keep the clamp secure on the pipe even while an attached light fixture bolt is being tightened. The Junior Pipe Clamp is terminated with a Junior Receiver and has a safety chain and cotter pin attached.
-
Item# MSE-041
3 Sizes AvailableThis piece of equipment has almost as many names as it has uses. Originally designed for mounting Baby fixtures to the top of set walls, they are also used as the world's lowest stand, nailing to a floor or on an Apple Box. Other names include Baby Nail On, 750 Pigeon, or just Nail On Plate. Matthews manufactures Baby Plates in 3", 6" and 12" straight and a 12" Right Angle.
Read More
Our Price: $19.07
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List-
Item# MSE-TVMP
Most TV lighting instruments have a hole in the yoke for the mounting of a C-Clamp. When one of these fixtures needs to be mounted on a stand the TVMP Adapter makes it easy. With an external diameter to fit into a Junior receiver and a 5/8" female bore for mounting on a Baby pin the threaded 1/2" -13 top attaches right to the lamp yoke.
-
Item# 209632
The Matthews 209632 is designed to work with the Mafer & Super Mafer Clamp when mounting light fixtures. It's hexagonal cap fits directly into the clamp and gives you a 5/8" lighting stud at the opposite end.
Our Price: $9.53
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# 29959E
Sandbags are used whenever you need extra weight to prevent tipping. You usually "bag" stands, especially when the weight is off center, such as with a heavy Scrim. They help stabilize equipment in windy situations and can counter balance Boom Arm applications. Matthews fills our Sandbags with sanitized sand to prevent algae growth if they get damp. The empty bags are completely sewn except for a 1" seam, left open for the user to fill and then sew closed. This can save on the shipping charges,...
Our Price: $26.95
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# 29960E
Sandbags are used whenever you need extra weight to prevent tipping. You usually "bag" stands, especially when the weight is off center, such as with a heavy Scrim. They help stabilize equipment in windy situations and can counter balance Boom Arm applications. Matthews fills our Sandbags with sanitized sand to prevent algae growth if they get damp. The empty bags are completely sewn except for a 1" seam, left open for the user to fill and then sew closed. This can save on the shipping charges,...
Our Price: $27.50
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# 350584
The Matthews Mini Grip Head 350584 is a light weight composite mini grip head that is Matthews' strong! It will fit on all 5/8" baby spuds, or light weight 3/8" stands. It's jaws hold flags and scrims...anything with up to a 3/8" diameter shaft.
Our Price: $31.95
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List-
Item# 397050
Track Curved 8ft Section Heavy Wall 20ft Diameter
Our Price: $686.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# 429618
Pipe Clamps have a uniquely designed hook that keeps the clamp on the pipe even with a light fixture attached. The Baby Pipe Clamp has a uniquely designed hook molded into the clamp, which keeps the clamp on the pipe even with a light fixture attached while the bolt is being tightened. The Baby Pipe Clamp terminates in a 5/8" Pin with a safety chain and cotter pin attached.
-
Item# 756140
2 Colors AvailableCentury Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial lighting, the stages would revolve to allow for continuous overhead lighting from the sun. Large reflectors would be positioned to bounce back or kick the overhead light up onto the stage and illuminate the set and actors. These reflectors were made in many sizes, but it seems the most...
Read More
Our Price: $203.67
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List-
Item# B389788
Designed primarily for their use in lighting kits these stands are compact and light weight. They are ideal for assembling custom lighting kits or as a replacement. Many MSE Kit Stands employ a brake shoe system for locking off the riser tubes as opposed to pinch castings therefore permitting the use of heavier fixtures.
Our Price: $85.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# MSE-039
2 Version AvailableThe Matthews Studio Equipment Chain Grip provides maximum gripping power on any size pipe up to 6" in diameter. The Locking Pliers also provides maximum gripping power on both flat and round surfaces with smaller diameters. EXTREME CAUTION must be taken when the 5/8" pin provided on the adjustment screw is used. Be sure that any off-center weight is toward the locking direction (clockwise); allowing more weight on the other side could loosen the jaws.
Read More
Our Price: $76.50
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# MSE-149549
Open End Frames are made of spring steel with a 3/8" pin and support which can be used to hang the Scrim from the C Stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the frame without causing a shadow. Open Ends are used to control or manipulate light falling on certain areas of the set or subject. They can be used to soften or reduce light without a noticeable edge. A color...
Our Price: $55.47
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# MSE-159021
The Matthews 159021 is a solid frame scrim to keep weight to a minimum and yet get maximum strength, all Matthews Solid Frames are made of 3/8" thin wall tubing. The mounting pin is solid rod. Matthews Solid Frames stainless steel for durability. All Matthews Scrims and Flags are bordered with heavy duty color coded webbing. All 48" x 48" Solid Frames Scrims weigh 4lbs.
Features: Specifications: Fabric: White 1/4 Stop Silk
Size: 48 inch x 48 inch (122 x 122cm)
Approx. Light...
Our Price: $127.57
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# MSE-169001
Newly designed 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In addition, the 48"x48" frames have been squared off with the removal of the mouse ears. Flags are square or rectangular frames with mounting pins attached and covered with a solid cloth material....
Our Price: $63.27
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# MSE-169004
The Matthews 169004 is a 18" X 48" Cutter. Newly designed 90 degree Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In addition, the 48" x 48" frames have been squared off with the removal of the mouse ears. Flags are square or rectangular frames with...
Our Price: $67.60
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# MSE-169010
Newly designed 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In addition, the 48"x48" frames have been squared off with the removal of the mouse ears. Flags are square or rectangular frames with mounting pins attached and covered with a solid cloth material....
Our Price: $65.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# MSE-169059
Newly designed 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In addition, the 48"x48" frames have been squared off with the removal of the mouse ears. Flags are square or rectangular frames with mounting pins attached and covered with a solid cloth material....
Our Price: $54.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List
