Where to Buy Matthews | Studio C-Stands, Dollies, Clamps

Viewing Item(s):

Display

Show As

Matthews B756040 Hollywood 40 Inch Double Riser C-Stand with Sliding Leg/Grip Head & Arm - Black
Item# MSE-B756040
The term 'Century Stand' goes back to the early days of motion picture production. Before there was artificial lighting the stages would revolve to allow for continuous overhead lighting from the sun. Large reflectors would be positioned to bounce or kick the overhead light up onto the stage and illuminate the set and actors. These reflectors were made in many sizes, but it seems the most popular was the 100 inch, or 'century', sized reflector. In later years, studios, grips and gaffers began to...

Our Price: $251.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Matthews 387030 Hollywood Beefy Baby - Double Riser with Rocky Mountain Leg
Item# MSE-387030
The Matthews 387030 Hollywood Beefy Baby leg supports now fold down. Legs are made of steel instead of aluminum to provide greater stability and longer wear. The top riser which is the smallest in diameter is also made of steel, increasing its strength and permitting the 5/8" Baby Pin to be welded directly to the riser instead of being pinned. Features: Specifications: Max Height: 104" (2642mm) Min Height: 41" (1041mm) Capacity: 22lbs (10kg) Weight: 12.5lbs (5.7kg) Footprint: 33.5"...
Our Price: $278.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Matthews 429627 Infinity Arm Kit
Item# MSE-429627
The 429627 Infinity Arm is a versatile cine arm used to mount cameras, lights, monitors and anything else you require. The Infinity Arm is a fully articulated arm equipped with 360degrees rotate-able and interchangeable, ball-in-socket, quick release tips for adding and removing accessories quickly and efficiently. The Infinity Arm is the strongest articulating cine arm on the market, with a weight capacity of 15-32lbs depending on the configuration. The Infinity Arm is manufactured...
Our Price: $369.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Matthews 515003 Elemac Mounting Plate
Item# MSE-515003
The Elemac Mounting plate is used to mount your Bazooka.
Our Price: $242.30
Availability: Usually Ships in 5-14 Days
Add to Wish List
Matthews 420110 Matthellini Clamp - 2-Inch End Jaw
Item# MSE-420110
2 Sizes Available
The Matthews 420110 provides strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. It features an ergonomic handle design and reinforced jaws, and the shaft is 1010 chrome plated steel. It's available with 2" or 3" Center Jaw and 2" or 6" End Jaw. The Center Jaw has a fixed jaw mounted at the base of the Baby Pin portion of the shaft providing strong support for the pin. The End Jaw has the fixed jaw mounted at the end of the...
Read More
Our Price: $73.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Matthews 386037 Pony Preemie Baby Light Stand - 28 in to 69 in - 25lb Capacity - Aluminum
Item# MSE-386044
Heavy-duty and rugged, these aluminum and steel stands can withstand the rigors of location shooting. Made with square tubular legs for additional strength. Smaller versions of Beefy Baby Stands are known as Mini Preemie and Preemie Baby Stands. Features: Stainless steel helicoil inserts in riser castings. V-shaped brass brakes ensuring 3-point strong contact. Stay put T-handles wont fall out of riser castings. Knurled baby pin ensures whatever is being mounted stays put. Specifications:...
Our Price: $339.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Matthews 429603 Equipment 12 Inch C-Clamp to Baby Spud with 2-5/8 Inch Pins
Item# MSE-429603
Matthews C Clamps 12" with 2-5/8" mounting pins. Each clamp has a steel channel welded to both sides of the opening for better and safer locking. Clamps made for mounting Baby fixtures have two separate pins at different angles so that the light fixtures may fit with minimal clearance. Matthews C Clamps are manufactured from premium drop forged steel. It should be noted however, that since the Matthews clamp is an adaptation of a standard C Clamp, there is no effective warranty on the part.
Our Price: $151.30
Availability: Usually Ships in 5-14 Days
Add to Wish List
Matthews 259535 Full Size Apple Box - 8inH x 12inW x 20inL
Item# MSE-259535
4 Sizes Available
Matthews Apple Boxes are one of the most ubiquitous and useful pieces of equipment on a film set. They are used for anything that needs to be propped up or supported temporarily. They can be used to prop up furniture and light stands, for leveling camera dolly track, or to provide temporary seats, workbenches, or stepladders. You can nail wall plates to them to hold low angle lighting fixtures and a multitude of other purposes. Matthews Apple Boxes are constructed of industrial grade plywood. Often...
Read More

Our Price: $67.00
Availability: 2+ Weeks
Add to Wish List
Matthews B377709 Menace Arm Kit for 1 1/4 Inch Schedule 40 Aluminum Pipe Rail
Item# MSE-B377709
The Matthews Schedule 40 Aluminum Pipe B377709 Menace Arm kit provides the ability to boom a lighting fixture into position while keeping the light stand out of camera view. The system can also be configured to hold cameras and gimbals with optional adapters. The kit is available in black and works with standard 1¬" speed rail (inside diameter). The rear counter weight mount includes top and bottom D-rings for ratchet strap connection to the bottom of the stand in lieu of the counter weight...
Our Price: $208.00
Availability: Usually Ships in 5-14 Days
Add to Wish List
Matthews 209078 Patriot Wrench with 7 Common Cutouts for Wing Nuts/Hex Nuts/Square Bolts - 7/8 / 9/16 / 1/2 / 3/8 / 5/16
Item# MSE-209078
The Matthews Patriot Wrench combines 7 of the most common cutouts for the professional rigging industry into one low profile tool. Wing nuts, hex nuts and square bolts can be easily adjusted with this thoughtfully designed wrench. A lanyard hole is featured to ensure grid clamps, pipe clamps, bale blocks and more are safely configured when working overhead. The Patriot Wrench is fabricated from 6061-T6 aluminum and is hardcoat type 3 anodized to ensure a lightweight yet durable tool.
Our Price: $39.99
Availability: In Stock
Add to Wish List

Matthews Studio Equipment

By Category

By Price Range

Filter By

Narrow Products

By Category

By Price Range

Filter By

Matthews B756040 Hollywood 40 Inch Double Riser C-Stand with Sliding Leg/Grip Head & Arm - Black

Matthews 387030 Hollywood Beefy Baby - Double Riser with Rocky Mountain Leg

Matthews 429627 Infinity Arm Kit

Matthews 515003 Elemac Mounting Plate

Matthews 420110 Matthellini Clamp - 2-Inch End Jaw

Matthews 386037 Pony Preemie Baby Light Stand - 28 in to 69 in - 25lb Capacity - Aluminum

Matthews 429603 Equipment 12 Inch C-Clamp to Baby Spud with 2-5/8 Inch Pins

Matthews 259535 Full Size Apple Box - 8inH x 12inW x 20inL

Matthews B377709 Menace Arm Kit for 1 1/4 Inch Schedule 40 Aluminum Pipe Rail

Matthews 209078 Patriot Wrench with 7 Common Cutouts for Wing Nuts/Hex Nuts/Square Bolts - 7/8 / 9/16 / 1/2 / 3/8 / 5/16

Sign In

Matthews Studio Equipment

Narrow Products

By Category

By Price Range

Filter By