-
Item# PLM-PDACCAPO
A Reamping box is mainly used in studios, with this box you can play back a recorded guitar signal (or any other instrument signal) and send it to an amplifier where it is picked up by microphones and recorded again. This way the recording engineer can experiment with the sound of an instrument. The Daccapo takes care of all impedance matching issues and also eliminates ground loop humming thanks to the use of a Transformer. The signal level to the amplifier can also be adjusted with a level pot....
-
Item# PLM-PDI03L16
The PDI03 Palmer speaker simulator combines load impedance, a signal splitter and DI box especially designed for guitars. All functions are optimised for live and recording applications. Instead of being connected to a loudspeaker, the PDI03 is connected directly to the amplifier output. The signal is no longer picked up by a microphone, but after passing through a special filter section is fed directly into a mixing console, tape recorder, etc. This permits power amplifiers to be operated to saturation...
-
Item# PLM-PGA04L04
Special DI box with loadbox for guitars. The integrated load resistor permits tube amplifiers up to approximately 120 W to be connected to the PGA04, bypassing a loudspeaker. A jack socket (unbalanced) and balanced XLR connector are available for direct pickup of the signal. The extensive filter section provides for a realistic simulation of classic guitar loudspeaker sounds. Features: Speaker Simulator + 4 Ohm Loadbox + Made in Germany + DI Box Specifications: Product type: speaker simulator
Type:...
-
Item# PLM-PGA04L16
Special DI box with loadbox for guitars. The integrated load resistor permits tube amplifiers up to approximately 120 W to be connected to the PGA04, bypassing a loudspeaker. A jack socket (unbalanced) and balanced XLR connector are available for direct pickup of the signal. The extensive filter section provides for a realistic simulation of classic guitar loudspeaker sounds. Features: Speaker Simulator + 16 Ohm Loadbox + Made in Germany + DI Box Specifications:
Product type: speaker simulator
Type:...
-
Item# PLM-PLI05
Balanced or unbalanced isn't the question here. BALUS stands for Balanced-Unbalanced. Due to the stereo TRS jacks used in the PLI05, it can cope with both balanced and unbalanced signals. The PLI05 is so to say the PLI02's little sister. Both boxes can be used to convert balanced to unbalanced and both use so called line isolating transformers to realize a galvanic separation. They are connected between mains powered devices to reliably prevent ground loop hum. The PLI02 was designed for use with...
-
Item# PLM-PLI06
Today, lectures and presentations are mostly held with audio and visual media support. Connecting laptop computers to the mixing consoles of PA systems, however, can be a major problem due to incompatible connector formats. The Palmer Line Level Convertor PLI06 is a dedicated interface to feed the unbalanced stereo signal typically provided by a laptop to the balanced (mono) microphone inputs of professional mixing desks. It mixes the stereo output to mono while impedance matching and signal balancing...
-
Item# PLM-PLS02
A passive dual channel line splitter that is mainly used to feed the left and right master outputs of a mixer into several inputs such as power amplifiers, recording machines etc. A specially designed audio frequency transformer maintains signal integrity and prevents ground loop hum. This unit also converts unbalanced signals into balanced signals and vice versa. Rugged diecast aluminium box. Features: Passive 2 channel line splitter + Converts unbalanced signals into balanced signals and vice...
-
Item# PLM-PMBLA
The PMBL-ACTIVE is a 2-channel stereo line level merge box that can be used to merge two stereo line signals into one stereo output. One classic application: routing two mixing desks to one PA system. The unit has enough amplification to boost even semi-professional levels accordingly. The input channels are galvanically isolated from one another. Each channel offers a mute switch and the ability to mix the stereo signal down to mono. The unit is housed in a 1 U/9.5" case and has a built-in power...
-
Item# PLM-PRMD28
Distribution amplifier, switchable between microphone and line levels. Two balanced inputs, individually configurable for microphone or line levels, can be routed to eight outputs. The levels are adjustable for all outputs. For each channel a 20 dB pad expands the adjustable dynamic range, for a wide range of applications. A switch allows 1 source to be distributed to 4 stereo outputs, or 2 sources to be distributed to 8 mono outputs. Features: Distribution amplifier + Switchable between mic and...
-
Item# PLM-PRMLS
Designed to split line level signals, features similar to PRM-MS with the exception of decoupling resistors to obtain the lowest possible source impedance. Features: 4 channel line splitbox + Decoupling resistors to obtain lowest possible source impedance Specifications: Product type: splitter
Type: line split
split type: 1 in 2 + 1
Channels: 4
Inputs: 4
input connectors: XLR
max. input level: + 20 dB
number of split-outputs per canal: 2
THRU outputs/channel: 1
max. output level: + 20 dB
output...
