-
Item# PLAT-202016J
Make all of your connections EZ! Platinum Tools 202016J EZ-RJ45 CAT6+ Connectors & EZ-RJ45 Cat6+ Strain Relief.
Features: 50 pieces EZ-RJ45 Cat6+ Connectors
50 pieces EZ-RJ45 Strain Reliefs
Work with Solid or Stranded Wire
-
Item# PLAT-202044J
The Platinum Tools ezEX-RJ45 Connectors are designed to be the perfect fit! You can easily terminate Cat 5e, Cat 6, and Cat 6a cable with Platinum Tools ezEX44 RJ45 connectors. The ideal connector for Cat 6 and similar 23AWG conductor cable. Installers know Cat 6 cable with 23AWG conductors can be a very tight fit in industry standard RJ45 or even EZ-RJ45 Cat 6 connectors. The ezEX44, with it's larger body cavity and bigger conductor channels, make cable insertion faster and terminations much easier.
This...
-
Item# PLAT-106190
Streaming media whether data, audio or video, is on a sharp rise and users are demanding more bandwidth. That means bigger cable, commonly referred to as CAT6E, 6A and 7, and usually shielded. For maximum performance, connector and crimp tool choice is critical. Our 106190 CAT6A/10Gig termination system not only meets, but exceeds these requirements.
Features: RJ45 CAT6A/10Gig Shielded Connector
Max cable OD: 8.5mm/0.335
Max conductor OD: 1.35mm/0.053
UL and RoHS compliant
Made in...
-
Item# PLAT-TNP850K1
Net Prowler combines network testing (physical layer and link), cable verification & troubleshooting and PoE voltage testing in a handheld tester with a full-color display; all with the capability of saving and printing tests results from a personal computer.
Troubleshoot Networks
Supports IPV4 and IPV6 protocols
Verifies DHCP connectivity and DNS
Pings IPV4, IPV6, and URL addresses
CDP, LLDP, NDP, and VLAN detection
TCP/UDP Throughput Test
Verify Port...
Our Price: $979.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Item# PLAT-105004
The EZ-RJ45 connector system has been used and endorsed by professionals worldwide for over 20 years. The design allows conductors to extend through the front end of the connector for easy verification of correct wiring order prior to crimping. The Platinum Tools 105004 has a large interior body cavity makes cable insertion easy with wire twists close to contacts for optimized performance. Connectors are crimped and excess conductors trimmed in one action with either the 100054C or 100062C...
-
Item# PLAT-202010J
The EZ-RJ45 connector system has been used and endorsed by professionals worldwide for over 20 years. The design allows conductors to extend through the front end of the connector for easy verification of correct wiring order prior to crimping. The Platinum Tools 202010J has a large interior body cavity makes cable insertion easy with wire twists close to contacts for optimized performance. Connectors are crimped and excess conductors trimmed in one action with either the 100054C or 100062C...
-
Item# PLAT-100061C
The Platinum Tools EXO Crimper System utilizes a patented "EXO Crimp Frame" that accepts interchangeable crimp dies for various connector types. Simply swap out the die set to change from one type of connector to another. This patented 100061C EXO Crimper includes the 100071 die that crimps and trims conductors on all of the latest generation ezEX-RJ45 System ezEX44 and ezEX48 non-shielded or shielded connectors. These connectors feature pass through of conductors for visual verification...
-
Item# PLAT-105028
Numerous new twisted pair cable designs are coming to the market to satisfy demands for cable to provide higher level performance and capacity. Resulting cables with Larger overall OD and conductor OD can present a termination challenge. The patented Platinum Tools 105028 ezEX-RJ45 system connectors have the versatility to be the termination solution many of these designs. This ezEX44 shielded connector with external ground tabs may be used to terminate most any CAT5/5e/6 cable with max overall...
-
Item# PLAT-100010B
The EZ-RJ45 connector system has been used and endorsed by professionals worldwide for over 20 years. The design allows conductors to extend through the front end of the connector for easy verification of correct wiring order prior to crimping. The Platinum Tools 100010B has a large interior body cavity makes cable insertion easy with wire twists close to contacts for optimized performance. Connectors are crimped and excess conductors trimmed in one action with either the 100054C or 100062C...
-
Item# PLAT-100054C
Designed for the professional installer with a ratcheted, high leverage, ultra stable platform for consistent, repeatable terminations. Crimp large wire gauges such as CD cables and be assured that every termination will meet FCC specifications.
Compatible with all EZ-RJ45 and EZ-RJ12/11 connectors as well as all standard modular plugs, except AMP.
The EZ-RJ PROTM HD Crimp Tool uses the EZRJ45 patented crimp & trim system and is designed tohandle larger dimensional size cables.
Features: Zero...
-
Item# PLAT-105029
Numerous new twisted pair cable designs are coming to the market to satisfy demands for cable to provide higher level performance and capacity. Resulting cables with Larger overall OD and conductor OD can present a termination challenge. The patented Platinum Tools 105029 ezEX-RJ45 system connectors have the versatility to be the termination solution many of these designs. This ezEX48 shielded connector with external ground tabs may be used to terminate most any CAT5/5e/6 cable with max overall...
-
Item# PLAT-EZ6-50
The EZ-RJ45 connector system has been used and endorsed by professionals worldwide for over 20 years. The design allows conductors to extend through the front end of the connector for easy verification of correct wiring order prior to crimping. The Platinum Tools 100010C has a large interior body cavity makes cable insertion easy with wire twists close to contacts for optimized performance. Connectors are crimped and excess conductors trimmed in one action with either the 100054C or...
-
Item# PLAT-105022
The Platinum Tools 105022 EZ-RJ45® shielded connector with external grounding tabs provides a fully shielded RJ45 connector with all the ease of termination benefits of the EZ-RJ45 system. Works with all CAT5/5e cables. Design allows conductorsto extend through the front end of the connector for the verification of wiring order prior to crimping. Shielded cable, foil and drain wire is inserted inside the connector body and when crimped makes secure connection to the internal ground tabs....
-
Item# PLAT-EZ5-100J
The EZ-RJ45 connector system has been used and endorsed by professionals worldwide for over 20 years. The design allows conductors to extend through the front end of the connector for easy verification of correct wiring order prior to crimping. The Platinum Tools 202003J has a large interior body cavity design and crimped rear strain latch assures secure termination on small OD CAT5/5e cables. Connectors are crimped and excess conductors trimmed in one action with either the 100054C or 100062C...
-
Item# PLAT-HPH48-25
The High Performance HPH48-25 J-Hooks are built with steel J-Hooks over-molded with polypropylene for an easy cable slide. The "Snap-Lock" Retainer is easy to use and re-use, firmly securing cables every time and eliminating the use of cable and Velcro ties. Each J-hook has a 2" wide base support, to prevent cable kinks. They're cULus listed, Plenum rated, RoHS compliant, and are available in 1", 2", 3", and 4" sizes, along with a variety of hardware accessories for all of your...
-
Item# PLAT-100027C
Numerous new twisted pair cable designs are coming to the market to satisfy demands for cable to provide higher level performance and capacity. Resulting cables with Larger overall OD and conductor OD can present a termination challenge. The patented Platinum Tools 100027C ezEX-RJ45 system connectors have the versatility to be the termination solution many of these designs. This ezEX48 shielded connector with external ground tabs may be used to terminate most any CAT5/5e/6 cable with max...
-
Item# PLAT-100028C
The Platinum Tools ezEX44 Connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar that allows larger conductors to pass through the front end of the connector. Making it easy to verify the wiring sequence before terminating. The connector is typically used with Cat6 and is terminated with EXO Crimp Frame and EXO-EX Die (PLAT-100061C).
In today's networks, twisted pair cables are demanding more speed and bandwidth. To help meet these requirements,...
-
Item# PLAT-90140
The EXO ezEX-RJ45 Termination System is the perfect mix of tools for new or experienced installers. You don't want to leave home without these essential tools. This kit includes electrician scissors, cable jacket stripper, EXO Crimp Frame, EXO-EX Die™ and 10 ezEX™ 44 connectors. All tools and connectors come neatly organized in the Platinum Tools heavy-duty nylon zippered case.
In today's networks, twisted pair cables are demanding more speed and bandwidth. To help meet these requirements,...
-
Item# PLAT-202022J
The Platinum Tools 202022J Original patented EZ-RJ45® shielded CAT5/6 connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front for EZ verification of wiring sequence. Applications with RF problems or grounding requirements usually specify to use shielded cable & shielded connectors.
Features: For use with CAT5e/6+ shielded cable
For solid round or stranded wire cables.
Max Cable OD: 7.11mm (0.280")
Max Insulated wire...
-
Item# PLAT-100003B
The EZ-RJ45 connector system has been used and endorsed by professionals worldwide for over 20 years. The design allows conductors to extend through the front end of the connector for easy verification of correct wiring order prior to crimping. The Platinum Tools 100003B has a large interior body cavity design and crimped rear strain latch assures secure termination on small OD CAT5/5e cables. Connectors are crimped and excess conductors trimmed in one action with either the 100054C or 100062C...
-
Item# PLAT-90151
Kit features the patented EZ-RJ45 HD Crimp Tool and connectors for the simplest, fastest & highest performing installation of Cat 5/5e/6 data networks.
-
Item# PLAT-202050J
Numerous new twisted pair cable designs are coming to the market to satisfy demands for cable to provide higher level performance and capacity. Resulting cables with Larger overall OD and conductor OD can present a termination challenge. The patented Platinum Tools 202050J ezEX-RJ45 system connectors have the versatility to be the termination solution many of these designs. This ezEX44 shielded connector with internal ground tabs may be used to terminate most any CAT5/5e/6 cable with max...
-
Item# PLAT-TVFL100
Fast, Easy Location of Problems in Most Fiber Optic Cables
Works with virtually all common fiber optic sizes and connector types, allowing you to test cables prior to install and test patch & breakout cables for faults.
Bright 10mW laser for continuity testing, also shows breaks and performance-reducing bends in most types of fiber optic cable.
Aluminum construction for durability and runs for more than 20 hours on 2 AA batteries (included).
Simple slide switch to select either...
-
Item# PLAT-100072C
The Platinum Tools EXO Crimper System utilizes patented "EXO Crimper Frame" that accepts interchangeable crimp dies for various connector types. Simply swap out the die set to change from one type of connector to another. This 100072C die crimps and trims conductors on all of the original EZ-RJ45 CAT5 & CAT6 non-shielded or shielded connectors. It may be used with the 100060C crimp frame only or interchanged with any other die in the EXO Crimper System.
Crimp dies currently available include:...
-
Item# PLAT-106206J
The 106206J is a 100 piece jar of RJ45 (8P8C) shielded Cat6 2 piece connectors with liner round solid 3-Prong.This 2 piece shielded system makes terminating CAT6 quick & easy. The staggered loading bar acts as the stopping point for pair separation and maintains wiring configuration. Simply flush cut the conductors and slide assembly into the connector and terminate. Features: Eight conductor mod plug with loading bar
Liner Bar Part No.: 1041
For conductors with an O.D. Range...
