Narrow Results:

• 

  Xcelite TCMB100STWN 86-Piece Service Technician Tool Set with Roller Bearing Case

  Xcelite TCMB100STW18" x 15" x 8" Tool Case with Tools! Contains 53 individual hand tools, 31 Series 99 interchangeable screwdriver/nutdriver blades and handles, and 2 specialized screwdriver/nutdriver kits. Extra large roller bearing wheels (3 5/8") with wide base for maximum stability and easy transport over rough pavement or stairs. Extension handle locks in place automatically when extended and retracted. Easy one-handed release. Two tote handles for convenience. Both are spring loaded...

  

  Read More

  Item #: XCL-TCMB100STW

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $1,492.00

  Add to Wishlist
• 

  Xcelite 175M Low Profile Diagonal Sheer Cutter with Blue Grips

  The 175M from Xcelite is a side cutter of 132mm length with safety clip. Full flush, thick soft padded handle, blade angle is 20°, blade length is 9mm. Tool can cut up to 20AWG. Features: Low profile, general-purpose cutter Superior blade by-pass shear cutting action Better cuts with half the effort Greatly reduced mechanical shock delivered to the work Features blue grips Features safety clips Flush cuts soft wire up to 20 AWG (0.8mm)

  

  Read More

  Item #: XCL-175M

  Availability: In Stock

  Our Price: $12.00

  Add to Wishlist
• 

  Xcelite 170MN Shearcutters with Blue Grips

  Xcelite's 170MN Shearcutter flush cutting tools require less than half the operator force of most wire and lead cutting tools and transmit proportionately less shock to the component. As a result, they comply with MIL-STD-2000, DODSTD-2000 and WS-6536E standards. Grips are molded of wide, shock absorbing material for operator comfort, however, safety glasses are still recommended when using these tools. Features: Advanced handle design Made from high quality carbon steel Non-glare...

  

  Read More

  Item #: XCL-170MN

  Availability: In Stock

  Our Price: $10.50

  Add to Wishlist
• 

  Xcelite 413MM 10 Piece Metric Drilled Shaft Nutdriver Kit in Red Plastic Case

  Xcelite 413MM is a color coded nut driver set that contains the following shaft sizes; 4MM through 8MM, 10MM, 11MM and 13MM. Each nut driver is a precision-machined, cold drawn, case-hardened socket with a bright finish that has a molded, firm grip. Features: Contains 4mm through 8mm, 10mm, 11mm, 13mm Sturdy red plastic case keeps nutdrivers orderly on work bench Carry tools on service calls

  

  Read More

  Item #: XCL-413MM

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $107.00

  Add to Wishlist
• 

  Xcelite MS549JVN 4 Inch Tapered Head Flush Cutting Pliers

  Xcelite MS549JVN 4 Inch Tapered Head Flush Cutting Pliers Features: Precision ground to close tolerances, individually finished and tested to ensure exact fit of jaws. Copaloy joint maintains perfect cutting edge and tip Polished head with gun metal handles ESD safe cushion grips supply maximum comfort but do not provide protection against electric shock Accu-lite ergonomic handles have an exclusive smooth, soft foam cushion grip Material is nonslip and compressible for positive gripping...

  

  Read More

  Item #: XCL-MS549JVN

  Availability: In Stock

  Our Price: $26.69

  Add to Wishlist
• 

  Xcelite GA54J 4 Inch Angled Diagonal End Cutter Pliers

  Xcelite GA54J 4 Inch Angled Diagonal End Cutter Pliers Features: Angled diagonal end cutter at 29° Flush cutting For cutting directly above the work area To use on closely spaced adjacent components Features green cushion grips

  

  Read More

  Item #: XCL-GA54J

  Availability: In Stock

  Our Price: $44.60

  Add to Wishlist
• 

  Xcelite TCR2N CR-2 Reverse Blade Screwdriver

  Xcelite TCR2N combination RB2 reversible screwdriver blade. Features: 1 reversible, interchangeable, combination blade No. 25 handle and RB2 blade RB2 blade consists of No. 2 Phillips® x 1/4" slotted reversible blade Specifications: Blade Style: Phillips®/Slotted Blade/Point Size: 1/4 in./6.35 mm and #2 Blade Diameter: 1/4 in./6 mm Working Length: 2 13/16 in./71.43 mm Overall Length: 7 1/4 in./184.15 mm

  

  Read More

  Item #: XCL-TCR2N

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $16.60

  Add to Wishlist
• 

  Xcelite MS545JVN 4 Inch Slim Tapered Head Flush Cutter with Green Cushion Grips

  The Xcelite® MS545JVN 4" slim line, tapered head diagonal flush cutter has straight sides, coil spring and GREEN cushion grips. It is used to trim leads after volume production soldering and repair work. Features: Specifications:

  

  Read More

  Item #: XCL-MS545JVN

  Availability: In Stock

  Our Price: $26.36

  Add to Wishlist
• 

  Xcelite 991 Amber Handle for Series 99 Interchangeable Blades

  The Xcelite 991 screwdriver handle accepts Xcelite series 99 interchangeable screwdriver blades (not included). The amber-colored handle has a 13/16" diameter and is 4" long. Xcelite manufactures specialized screwdrivers, nut drivers, and pliers for electronics applications. Features: Easy to operate Use with Series 99® interchangeable blades Handle color: Amber Overall Length 13/16 in. x 4 in.

  

  Read More

  Item #: XCL-991

  Availability: In Stock

  Our Price: $6.10

  Add to Wishlist
• 

  Xcelite XN100 5 13/16 Inch Light Duty Precision Knife

  Xcelite XN100 5 13/16 inch light duty precision knife designed for light-duty cutting on paper. Also for soft and light-weight materials or wood. Replacement blade: XNB103 Features: Designed for light-duty cutting on paper Also for soft and light-weight materials or wood Replacement blade: XNB103

  

  Read More

  Item #: XCL-XN100

  Availability: In Stock

  Our Price: $3.29

  Add to Wishlist
• 

  Xcelite 99PS50 13-piece Series 99 Compact Screwdriver & Nutdriver Set

  The Xcelite 99PS50 13-Piece Compact Screwdriver and Nut Driver Set features compact interchangeable screwdriver and nut driver blades. The set also includes the Model 99X5 extension, which adds 4 inches in length. The model 991 Handle holds the blade shaft firmly, yet permits quick, easy insertion and removal. The blades are made from high-quality steel, hardened and tempered for optimum performance. The set is supplied with a convenient see-through stand-up plastic case. Features: Kit...

  

  Read More

  Item #: 99PS50

  Availability: In Stock

  Our Price: $96.00

  Add to Wishlist
• 

  Xcelite 101SNV 5 Inch Wire Stripper & Cutter with Self-Opening Cushion Grip Handles

  The XCL-101SNV is a 5" wire stripper & cutter with self-opening cushion grip handles Features: Adjustable screw stop for different wire sizes Hardened with ground blades Spring-equipped self-opening handles Red plastic-coated cushion grip provides maximum leverage

  

  Read More

  Item #: XCL-101SNV

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $13.49

  Add to Wishlist
• 

  Xcelite 105SCGV Electrical Wire Stripper/Pliers

  The 105SCGV is a 6-inch Stripper and Cutter with spring and lock, cushion grip handle. Wire cutting and stripping edges conveniently located in front of pivot. Allows use in tight places, needle nose pliers add wire pulling and bending capabilities. Scissors-action stripper for cleaner, faster and more accurate stripping. Includes work-speeding automatic spring and lock. For copper and aluminum wire 10 to 22AWG. Features: With spring Red cushion grip handle provides maximum leverage...

  

  Read More

  Item #: XCL-105SCGV

  Availability: In Stock

  Our Price: $23.39

  Add to Wishlist
• 

  Xcelite 99MP 39-piece Series 99 Interchangeable Blade Tool Kit

  Xcelite 99MP 39-piece Series 99 interchangeable blade tool kit includes an assortment of interchangeable handles and screwdrivers, a nut driver, and spline blades, as well as other accessories for electronics repair and maintenance. The set includes 39 pieces from the Xcelite's Series 99 interchangeable tools: two screwdriver handles, one extension, one nut driver handle, nine nut driver blades, 25 screwdriver blades, and one reamer. The handles are made from plastic, and the blades and other...

  

  Read More

  Item #: XCL-99MP

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $295.00

  Add to Wishlist
• 

  Xcelite 99PR 14pc Screwdriver/Nutdriver Roll-Up Tool Kit

  Multi-purpose, 14-piece nutdriver and screwdriver set.

  

  Read More

  Item #: XCL-99PR

  Availability: In Stock

  Our Price: $122.00

  Add to Wishlist
• 

  Xcelite 99PS60 Series 99 Compact Bristol Multiple-spline Socket Type Screwdriver Set

  The XCELITE 99PS60 is a series 99 compact Bristol multiple-spline socket 11-piece Screwdriver Set with convenient see-through stand-up plastic case.Tip Size 0.048 in, 0.060 in, 0.069 in, 0.072 in, 0.076 in, 0.096 in, 0.111 in, 0.145 in, 0.183 in Shank Length 4 in Handle Length 4 in Includes Regular Handle, 4 in. Extension, Plastic Case Wt. Features: Specifications: Drive: Spline Drive Size: 0.048, 0.060, 0.069, 0.072, 0.076, 0.096, 0.111, 0.145, 0.183" Includes: (9) Spline Driver...

  

  Read More

  Item #: XCL-99PS60

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $72.00

  Add to Wishlist
• 

  Xcelite 99SM 23pc Screwdriver/Nutdriver Roll Up Tool Kit

  The Xcelite 99SM Service Master Tool Kit provides a variety of quick change tools and tool combinations. Xcelite 99SM Features: Speeds up assembly and service work Available in a durable, roll-up plastic coated canvas case Versatile 23-piece set of quality tools Features: Versatile 23-piece set of quality tools Provides a variety of quick change tools and tool combinations Speeds up assembly and service work Available in a durable, roll-up plastic coated canvas case

  

  Read More

  Item #: XCL-99SM

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $266.00

  Add to Wishlist
• 

  Xcelite C1KN 6-Piece Electronics Pliers Tool Kit with Pouch

  The Xcelite® C1KN Pliers Kit is made for pro electronic technicians and contains 6 of the most used electronics pliers, all enclosed in a durable vinyl pouch. It offers the EC54J transverse cutting pliers, MS54 diagonal cutting pliers, SN54 long nose pliers with side cutter, NN54 fine tip needle nose pliers, DN54G flat nose pliers and LN54 long nose pliers. Features: A compact kit designed for the sophisticated electronics technician or dedicated hobbyist Consists of the six...

  

  Read More

  Item #: XCL-C1KN

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $189.00

  Add to Wishlist
• 

  Xcelite CK20 Screwdriver Tool Set - Rev Blades and Handle - Zip Case

  The CK20 is a Plastic view kit in a zipper case with the RB1 and RB2 blades and a No. 25 handle. Features: Specifications:

  

  Read More

  Item #: XCL-CK20

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $25.54

  Add to Wishlist
• 

  Xcelite CN255G 5 Inch 60 Degree Curved Nose Pliers w/Cushion Grips & Smooth Jaw

  Curved Nose Pliers with Green Cushion Grips and Smooth Jaws Features: Curved nose pliers Thin tip Green cushion grips Smooth jaws

  

  Read More

  Item #: XCL-CN255G

  Availability: In Stock

  Our Price: $35.00

  Add to Wishlist
• 

  Xcelite MS54V Diagonal Cut Oval Head Semi-Flush Cutter

  The Xcelite MS54V 4 in. Oval Head Semi-Flush Diagonal Cutter performs semi-flush cutting and is ideal for general-purpose applications. It is equipped with green cushion grips and forged from high quality alloy steel, providing maximum strength and durability. Features: Diagonal cutting pliers, semi-flush General-purpose cutting Oval head for long life Features green cushion grips

  

  Read More

  Item #: XCL-MS54V

  Availability: In Stock

  Our Price: $28.20

  Add to Wishlist
• 

  Xcelite NN7776VN 6 Inch Long Needle Nose Pliers

  The Xcelite NN7776VN is a pair of 6 inch long needle nose pliers. Features: Cushion grips Smooth jaws General purpose Positive gripping of fine wire and subminiature components 6" long flat nose Specifications:

  

  Read More

  Item #: XCL-NN7776VN

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $30.60

  Add to Wishlist
• 

  Xcelite TCS100ST Tool Case w/Tools

  17" x 12" x 3 1/4" Rugged Cordura Tool Case - with Tools Features: Contains 53 individual hand tools 31 Series 99 interchangeable screwdriver/nutdriver blades and handles 2 specialized screwdriver/nutdriver kits Case made from rugged Cordura Dual heavy-duty zippers and soft leather wrapped handles Contains,on outside, 1 pocket on one side, 2 smaller pockets on opposite Size: 17" x 12" x 3 1/4"/432mm x 305mm x 83mm Cordura is a registered trademark of DUPONT

  

  Read More

  Item #: XCL-TCS100ST

  Availability: In Stock

  Our Price: $1,169.00

  Add to Wishlist
• 

  Xcelite TCS150STN Attache Tool Kit w/Hand Tools & Weller WP25 Soldering Iron

  Xcelite TCS150STN Attach Tool Kit Contains 23 individual hand tools, WP25 Weller 25 watt soldering iron, 24 Series 99 interchangeable screwdriver/nutdriver blades and handles. XL75 offset ratchet screwdriver set, measuring tape and solder. Case made from rugged Cordura. Features: Contains 23 individual hand tools WP25 Weller 25 watt soldering iron 24 Series 99 interchangeable screwdriver/nutdriver blades and handles XL75 offset ratchet screwdriver set, measuring tape and solder Case...

  

  Read More

  Item #: XCL-TCS150ST

  Availability: More on the way, usually ships in 3-10 business days

  Our Price: $879.00

  Add to Wishlist

Newsletter Sign Up

Weekly email with exclusive deals, unique new products, how-to videos and so much more!

Download the Newest Catalog!

• A Must for all Broadcast & AV Professionals
• Exclusive & Custom Solutions
• The Best New Products
• Latest Industry Trends