Audio Line Amplifiers

MLA-XLR is a single channel, bidirectional, long distance amplifier or driver for MIDI signals. It extends the range of MIDI to over 1000 feet using standard balanced audio lines (audio snakes, mic cables, etc.). MLA-XLR is refreshingly simple to use. There are no settings to configure. Just plug in the power supply and connect two MLA- XLRs together with a pair of standard mic cables. Then, connect your MIDI gear as you would normally. While the MIDI protocol specifies a...

The STA-1M allows bridging any audio line, adjusting the gain, and driving a balanced or unbalanced line. The circuit design allows the input to accept either balanced or unbalanced signals, of either high or low impedance. This is an instrumentation type input stage which will amplify the differential input, regardless of ground reference. The output is capable of driving either high or low impedance loads, and the output may be connected either balanced or unbalanced. RDL's SupplyFlex power...

The RM85 is an 8 channel two zone mixer. Channels 1-4 will accommodate XLR microphone or XLR line level inputs. Channels 5-8 are 1/4" inputs. All 8 channels can be sent to the two XLR outputs in three configurations; A, B or both A+B. The separate A and B outputs are XLR and either can be selected to be Line or Microphone level output. Channel 8 also has a stereo 3.5mm (1/8") input on the front of the RM85. Features: Four XLR balanced inputs with +48 V phantom power Four stereo...

The RDL STA-1 is a dual-channel line-level preamplifier with bridging inputs, adjustable gain or loss, and low-impedance outputs. Each of the two identical circuits is both an electronic line transformer and a line amplifier. Hook up the STA-1 just like a pair of audio transformers with gain. True dc amplifiers produce unsurpassed audio clarity, high common-mode rejection, ultra-low distortion and low noise. The STA-1 is perfect for most line amplification, impedance or balanced/unbalanced...

The Jensen JT-11-BMCF is a Line Output Audio Transformer with 1:1 Bifilar Windings. This transformer is designed for ultra-high performance line output stages. Specially processed 80% nickel core alloy is used for lowest possible harmonic distortion of high level low frequency signals. For best performance, driving signals should be free of DC and source impedance kept as low as possible. Line output transformers are useful mainly because they allow any output stage circuit topology,...

The PP532 pre amplifier, is a completely passive design with absolutely nothing added to your audio signal path. That means no power required, no electronics used and no distortion will ever be added to your music. It is the most effective way to reach high-end audio quality, and you will save enough coin that you can buy the more expensive speakers you have been eyeing. The chassis is made from .090 steel, meaning it is 3 times thicker than most chassis. Four pairs of RCA inputs...