DSLR Rigs & Accessories

ikan STR-DT12 Stratus ARRI Standard 12 Inch Lightweight Aluminum Dovetail

Item# IKAN-STR-DT12

Use the STR-DT12 12" ARRI-Standard Lightweight Dovetail Plate with a separately available sliding bridge plate to balance your camera rig and to support accessories. The Dovetail Plate features safety catches on each end to prevent the bridge plate from sliding off, and both 3/8"-16 and 1/4"-20 threads for mounting on a tripod quick release plate or other support. ARRI Standard Dovetail The Stratus Lightweight Dovetail is compatible with any ARRI Standard Baseplate. Safety...

Our Price: $99.99

Availability: Usually Ships in 5-14 Days

ikan STR-DT-MOUNT Dovetail Mount for STRATUS Shoulder Rig System

Item# IKAN-STR-DTMOUNT

The ikan Dovetail Mount for STRATUS Shoulder Rig System allows you to easily mount your Stratus shoulder rig system to an ARRI Standard Dovetail. Quickly switch between shoulder shooting to tripod shooting in seconds. The Dovetail Mount can be attached to your Stratus Shoulder rig system by screwing in the 1/4 screws into the Stratus Shoulder Pad. Mounting your Shoulder Rig to an ARRI Standard dovetail allows you to quickly offset the weight of your rig once it's mounted to the dovetail. Front...

Free Shipping with Minimum Order Banner

Our Price: $59.99

Availability: Usually Ships in 5-14 Days

SmallRig 3045 EVF Monitor Mount for KOMODO

Item# SR-3045

SmallRig EVF Monitor Mount for KOMODO 3045 connects monitors via one 1/4”-20 screw and connects KOMODO or cages via two 1/4”-20 screws. It tilts 170 degrees, swivels 360 degrees, and can be stopped at any angle with a load capacity of 1.5kg while the tightness is adjustable on each axis. Its top and bottom come with silicone paddings to prevent scratching and increase friction. It features 1/4”-20 holes, available for mounting other accessories at will. Features: Tailor-made monitor mount...

Free Shipping with Minimum Order Banner

Our Price: $49.00

Availability: Usually Ships in 5-14 Days

SmallRig 3722 Handheld Kit Canon EOS R

Item# SR-3722

SmallRig Handheld Kit Canon EOS R 3722 is designed to facilitate low-angle shot, protect camera, and provide accessory mounts. The kit includes a full cage and a top handle. The form-fitting full cage offers a wide range of mounting points such as 1/4''-20 threaded holes, ARRI 3/8" -16 locating holes, cold shoes, NATO rail for magic arm, side handle, LED light and microphone, etc. The top handle attaches to the cage via two 1/4''-20 screws and provides a comfortable and stable low-angle shooting...

Free Shipping with Minimum Order Banner

Our Price: $89.90

Availability: Usually Ships in 5-14 Days

SmallRig 838 Quick release Camera Fixing screw 1/4 inch

Item# SR-838

SmallRig Quick Release Camera Fixing Screw 828 with standard 1/4"-20 thread. The main body was made of stainless steel, and the Rotatable D-ring made of Zinc Alloys. Please refer to the size to ensure it works with your camera and quick release plate before shopping. Features: Specifications:

Free Shipping with Minimum Order Banner

Our Price: $3.99

Availability: In Stock

SmallRig 3276 Clamp/Magic Arm/Cold Shoe Combo for BMPCC 6K Pro Cage

Item# SR-3276

The SmallRig 12mm/15mm Single Rod Clamp for BMPCC 6K Pro Cage 3276 works with SmallRig cage 3270 to provide a perfect follow focus solution for BMPCC 6K Pro camera kit. Locked to the front of the cage via a 1/4 screw and a locating pin, it can be fitted with a 15mm single rod and fixed via a thumb twist knob, allowing easy connection with wireless focus motors such as Nucleus Nano, PD MOVIE, REDROCK.In addition, it is equipped with a 12mm rod clamp adapter, which can install a follow focus...

Free Shipping with Minimum Order Banner

Our Price: $19.90

Availability: Usually Ships in 5-14 Days

Kupo KG400412 Super Grip Finger with Round Camera Plate - 5/8-Inch Baby Receiver/1/8-Inch Junior Pin

Kupo Grip

Item# KUPO-KG400412

The Kupo KG400412 Super Grip Finger is made of heavy-duty metal and features a ball head with a 1/4''-20 thread male stud on a round camera plate and a TVMP adapter. This allows positioning of the camera in any direction on the stand or any equipment that comes with 5/8" (16mm) baby stud or 1-1/8" (28mm) junior receiver. It features three set screws on the plate to securely lock the camera in place. Features: Allow you to position your camera in any direction on the stands 3...

Free Shipping with Minimum Order Banner

Our Price: $55.65

Availability: Usually Ships in 5-14 Days

SmallRig 3454 Atomos Shinobi 7 Silicone Case (Kit)

Item# SR-3454

SmallRig Atomos Shinobi 7 Silicone Case (Kit) 3454 is designed to provide full protection for Shinobi 7. Made of natural silica gel, the lightweight and portable silicone case fits the monitor easily. Its anti-twist holder, together with a magic arm, prevents the deformation of silicone. The kit also includes a quick-absorbing and bubble-free screen protector (ID: 3455) to protect the monitor screen from fingerprints, water spray, dust, scratches, and knocks. Features: Lightweight and portable...

Free Shipping with Minimum Order Banner

Our Price: $39.90

Availability: Usually Ships in 5-14 Days

SmallRig 2059 1/4 inch Camera Hot shoe Mount with Additional 1/4 inch Screw (2pcs Pack)

Item# SR-2059

SmallRig 1/4" Camera Hot shoe Mount with Additional 1/4" Screw (2pcs Pack) 2059 is exclusively designed for Canon, Nikon, Olympus, Pentax, Panasonic, Fujifilm & Kodak. It includes a swiveling ball-head, a hot shoe adapter, a 1/4" screw and a wingnut. The cold shoe adapter could attach the camera tightly via a cold shoe, while the 1/4" screw could be mounted on the monitor in adjustable directions in different scenarios and could be locked via a wingnut. Besides, the 1/4" screw could be mounted...

Free Shipping with Minimum Order Banner

Our Price: $7.99

Availability: Usually Ships in 5-14 Days

Blackmagic Design PYXIS Rosette Plate for PYXIS 6K Camera

Item# BMD-PYXISROSETTE

This versatile plate provides a rosette mounting option to your PYXIS 6K camera. This side plate comes complete with 5 1/4" thread mounts and 4 3/8" thread mounts for adding accessories, plus a rosette mounting point for attaching handgrips or extension arms.Constructed from the same aircraft-grade aluminum as the PYXIS camera body, this versatile plate provides a rosette mounting option to facilitate the mounting of handgrips or extension arms. It also has five 1/4"-20 and four 3/8"-16 threaded...

Our Price: $85.00

Availability: Usually Ships in 5-14 Days

Blackmagic Design CINEURSAC/BASEPLT15 15mm Baseplate for URSA Cine 12K

Item# BMD-URSACINEBP15

Blackmagic Design CINEURSAC/BASEPLT15 is a 15mm Baseplate for URSA Cine 12K.

Free Shipping with Minimum Order Banner

Our Price: $645.00

Availability: Usually Ships in 5-14 Days

Blackmagic Design CINEURSAC/BASEPLT19 19mm Baseplate for URSA Cine 12K

Item# BMD-URSACINEBP19

Blackmagic Design CINEURSAC/BASEPLT19 is a 19mm Baseplate for URSA Cine 12K.

Free Shipping with Minimum Order Banner

Our Price: $805.00

Availability: Usually Ships in 5-14 Days

Blackmagic Design CINEURSAC/AROSETTE URSA Cine Rosette

Item# BMD-URSACINROSET

Upgrade your URSA Cine camera with the Blackmagic URSA Cine Rosette Mount. This innovative device allows for direct mounting and adds a rosette mount option to your camera. Unleash the full potential of your camera by enhancing its versatility and unlocking new mounting possibilities

Free Shipping with Minimum Order Banner

Our Price: $215.00

Availability: Usually Ships in 5-14 Days

Cartoni AH921 Quick Release Camera Plate Attachment with AH958 Side Load Camera Base Plate

Cartoni

Item# CAR-AH921

Cartoni AH921 is a Quick Release Camera Plate Attachment with AH958 Side Load Camera Base Plate. Features: DV quick release with 3/8" attachment

Free Shipping with Minimum Order Banner

Our Price: $246.40

Availability: Usually Ships in 5-14 Days

Cartoni AH958 Side Load Camera Base Plate for Focus 10 and Lambda 10 Fluid Heads

Cartoni

Item# CAR-AH958

The Cartoni AH958 Camera Plate Focus 10 is a camera plate that is compatible with Focus 10 and Lambda 10 Fluid heads. Specifications: Weight: 0.2 lbs Box Dimensions 4.8" x 2.3" x 0.3"

Free Shipping with Minimum Order Banner

Our Price: $110.13

Availability: Usually Ships in 5-14 Days

Hollyland HL-SF03 Stabilizer Screw Fitting for Pyro H Transmitter and Receiver

Hollyland

Item# HL-SF03

The Hollyland HL-SF03 Screw Stabilizer for the Pyro series is specifically designed to mount your Pyro H transmitter or receiver to a gimbal rig. The captive screw of the screw fitting can be mounted to the 1/4"-20 thread on the Pyro H Transmitter or receiver and offers a single shoe adapter for your gimbal rig. The lightweight and compact accessory is durably made for a secure and reliable connection. Features: Mount Pyro H TX or RX onto Gimbal Provides Single 1/4"-20 Mounting Thread Mounts...

Free Shipping with Minimum Order Banner

Our Price: $9.99

Availability: Usually Ships in 5-14 Days

Hollyland HL-CS05 Rotatable Camera Cold Shoe Mount for Pyro H Transmitter and Receiver

Hollyland

Item# HL-CS05

Hollyland HL-CS05 is a Rotatable Camera Cold Shoe Mount for Pyro H Transmitter and Receiver.

Free Shipping with Minimum Order Banner

Our Price: $14.99

Availability: Usually Ships in 5-14 Days

IDX HDS-300S Build-Up Rig - Adapt Small Camcorders for Studio/EFP - PROTECH

Item# IDX-HDS-300S

IDX HDS-300S System built-up rig helps adapt small camcorders for studio/EFP operations. (2x BNC cables and 2 sets of 1/4 & 3/8 screws included) Features: Specifications: Input: DC In: 1x 4-pin XLR, V-mount plate, HD-SDI In: 1x BNC, IF In (VF In): 1x 6-pin Output: DC Out: 1x 4-pin XLR, 1x D-Tap, 1x Mini 4-pin (14.1V/8.4V), HD-SDI Out: 1x BNC, Tally Out: 1x BNC (On/Off), Return Switch Out: 1x 4-pin Operating Temperature: 32°F?104°F Storage Temperature:...

Free Shipping with Minimum Order Banner

Our Price: $2,385.00

Availability: Usually Ships in 5-14 Days

IDX ST-1 Tripod Adapter Plate for Sony-type Tripod Adapter/Tripod Base - PROTECH

Item# IDX-ST-1

Use the IDX ST-1 to fix a camera/camcorder to a Sony-type tripod adapter/tripod base(1x 3/8-1/4 screw adapter, 1x 1/4 camera screw, 2x washers included). Features: Specifications: Compatible with: Sony VCT-14/U14, PROTECH VST-14 Dimensions: 0.98(W) x 0.59(H) x 9.69(D) inches Weight: 0.46 lbs approx. Accessories Included: (1) 3/8-1/4 screw adapter, (1) 1/4 camera screw, (2) washers

Free Shipping with Minimum Order Banner

Our Price: $173.00

Availability: Usually Ships in 5-14 Days

IDX ST-7R Universal Small Camcorder Shoulder Adapter Rig - PROTECH

Item# IDX-ST-7R

IDX ST-7R is a adapter to convert most small camcorders to a shoulder-type camcorder. Compatible with Canon, JVC Kenwood, Panasonic, Sony handheld camcorders (with some exceptions). Features: Specifications: Compatibility: Canon, JVC Kenwood, Panasonic, Sony handheld camcorders (with some exceptions) Input: DC In: (1) 4-pin XLR, V-mount plate Output: DC Out: (1) 4-pin XLR, (4) D-Tap, (1) Mini 4-pin (12V/8.4V) Additional Connectors: (3) BNC Operating...

Free Shipping with Minimum Order Banner

Our Price: $806.00

Availability: Usually Ships in 5-14 Days

IDX STF-10 Mounting Bracket for RM Series - PROTECH

Item# IDX-STF-10

IDX STF-10 is a mounting bracket to fix remote controller such as focus demand, zoom demand, etc on the pan rod of a tripod. Features: Specifications: Screws: 1x 3/8 for the remote, 2x 1/4 for the pan rod Dimensions: 4.84 inches (length) Weight: 1.15 lbs approx.

Free Shipping with Minimum Order Banner

Our Price: $61.00

Availability: Usually Ships in 5-14 Days

IDX UH-35 Universal Accessory Pan Head - PROTECH

Item# IDX-UH-35

IDX UH-35 is a universal pan head to mount accessories on a camera rig(1/4 male-male screw adapter included). Features: Specifications: Load Capacity: 4.4 lbs Dimensions: 2.48 inches (height) Weight: 0.33 lbs approx.

Free Shipping with Minimum Order Banner

Our Price: $69.00

Availability: Usually Ships in 5-14 Days

ikan STR-BMPCC6K STRATUS Complete Cage for the Blackmagic Pocket Cinema Camera 6K & 4K

Item# IKAN-STRBMPCC6K

The STR-BMPCC6K is form-fitted camera cage from ikan. The frame is shaped to accommodate the Blackmagic Pocket Cinema Camera 6K & 4K cameras. The cage comes in four main parts: the top handle, top rod mount, base, and cage frame. Form-Fitted Cage Frame The camera frame is shaped specifically to the Blackmagic Pocket Cinema Camera 6K and 4K -style body, with cutouts on top for button and dial access. Room has been made on the left and right sides of the cage for access to memory card slots,...

Free Shipping with Minimum Order Banner

Our Price: $199.99

Availability: Usually Ships in 5-14 Days

ikan ELE-P-BMCC Elements Plus Blackmagic Cinema Camera Cage - 15mm

Item# IKAN-ELE-P-BMCC

ikan's ELE-P-BMCC Elements Plus line is designed and built for professional videographers and cinematographers who want a complete out-of-the-box rig solution at an affordable price. The ELE-P-BMCC is a complete camera rig system specifically designed for the Black Magic Cinema Camera.Integrated into the design are air vents to prevent over heating. For balance and stability on a tripod, the ELE-P-BMCC slides into the included dovetail plate equipped with a safety catch. The cage...

Free Shipping with Minimum Order Banner

Our Price: $199.99

Availability: Usually Ships in 5-14 Days