Ethernet PCI Cards

APC AP9640 is a UPS PCIe Network Management Card 3 with remote monitoring and control of an individual UPS by connecting it directly to the network. This card is compatible with all APC Single and Three Phase Smart-UPS with the following model prefixes: SUA SUM SURT SURTA SURTD SUVT & MGE Galaxy 3500 SMT SMX SRT SRC Features: BACnet/IP Support for Smart-UPS: Supports reporting UPS information to Building Management Systems or other third party management systems via BACnet/IP...

The JLCooper 920444-4 provides a direct 10/100 Ethernet (TCPIP or UDP) connection for controlling network based applications. Simplifies connection to your computer or LAN, and keeps cable clutter to a minimum. Features: For Shot Boxes, GangWay16 / MCS-3000XL / Eclipse MXL 10/100 Ethernet Connection For Long Cable Runs Simplifies Connection to Computer Specifications: Compatibility: GangWay16, KeyShot, RackShot, SharpShot, Eclipse MXL, MX-SA & TX...

The Middle Atlantic Network Interface Card UPS-OLIPCARD allows for remote monitoring and control of a UPS attached to a network. After you install the hardware and configure an IP address, you can access, monitor, and control your UPS from anywhere in the world. Just use a web browser such as Internet Explorer or Firefox to access your UPS. Servers and workstations can be protected by the UPS utilizing the Power Manager to shutdown properly when signaled by the OLIPCARD. Features: Real time...

The Plura PCIe 3G is a PCI Express reader card for LTC, and DVITC and ATC from 3G-SDI, HD or SD video. Plura's most reliable and affordable PCIe cards are being used by variety of customers in many critical and important computer hardware and software development applications. Features: PCIe 3G is a PCI Express reader card for LTC, DVITC and ATC, 3G-SDI video The card has its own processor system with a register set for data transfer Critical time routines are completely decoupled...

The WEBCARDLX Web Management Accessory Card turns a compatible Tripp Lite UPS system or PDU into a managed device on your network. By inserting WEBCARDLX into an accessory slot and using an SNMP network management platform, web browser, SSH or Telnet, you can monitor, control and reboot the device from almost anywhere at any time. Its HTML5-based interface means Java isn’t needed to interact with the mobile-friendly PowerAlert Device Manager. Monitor site electrical data, UPS self-test...