Audio-Technica ES925C21/XLR Cardioid Condenser Microphone with 18-Inch Gooseneck and XLR Power Module

ES925C21/XLR - Overview

• Features:

  • Modular microphone system includes a microphone element, gooseneck and power module each interchangeable with components from other ES Modular Microphones
  • Element housing features a highly visible, single-state RGB LED status indicator that functions seamlessly with ATUC series products and AT8699R desk stand
  • Power module plugs into any standard XLRF-type connector or mounts to 5/8"-27 stands using included quick-mount stand adapter
  • Available interchangeable elements permit angle of acceptance from 90° to 360°
  • Designed for professional sound reinforcement and other commercial sound applications
  • Interchangeable condenser microphone elements provide full-range, natural sound
  • Small-diameter gooseneck design permits highly flexible positioning
  • Superior off-axis rejection for maximum gain before feedback
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
   

• Specifications:

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 30Hz - 20kHz
  • Open Circuit Sensitivity: -40dB (10.0mV) re 1V at 1Pa
  • Impedance: 130Ω
  • Maximum Input Sound Level: 140dB SPL
  • Dynamic Range: 112dB
  • Signal-to-Noise Ratio: 66dB
  • Phantom Power Requirements: 11V - 52V DC
  • Switches: LED Color
  • Current Consumption: 6.7mA
  • Weight: 5.0oz (141.0g)
  • Dimensions: 21" x 0.8" x 0.8" (533.4mm x 20.2mm x 20.2mm)
  • Output Connector: Integral 3-pin XLRM-type
  • Optional Interchangeable Elements:
    - ESE-Ca cardioid (120°)
    - ESE-Ha hypercardioid (100°)
    - ESE-MLa MicroLine® (90°)
    - ESE-Oa omnidirectional (360°)
  • Audio-Technica Case Style: M43
   

• Item Includes:

  • 1x ES925/XLR microphone
  • 1x ES8544 XLR power module
  • 1x AT8109a foam windscreen
  • 1x AT8474 universal isolation mount
  • 1x AT8473 quick mount stand adapter
  • 1x 5/8"-17 - 3/8"-16 threaded adapter
  • 2x M2 set screw
  • 1x Hex wrench