ClearSonic IsoPac portable isolation booths create a more ideal acoustic space wherever you are, so you can spend less time worrying about acoustics and more time getting great sounding mixes. ClearSonic's isolation booths are the perfect solution to cut down on microphone bleed and environmental noise to achieve quieter volume levels and better mixes for home and studio recording, House of Worship services, and live music venue performances. In addition to drums, they work great for guitar, horn, voice, or any sound source.
The IsoPac E is designed to be a vocal booth that will fit up to three people and offers substantial sound isolation and volume reduction. Just take a step inside and you will hear and feel the difference. It is slightly smaller than the IsoPac B but includes more internal acoustic treatment. Your vocal mic is surrounded with a drum shield and acoustic treatment to provide a more ideal tracking environment and will reduce external noise, so you can be sure your vocals will sound clean and clear. The drum shield acts as a sound barrier reflecting sound back into the booth where it can be absorbed by the S2224, S2466x2, and SL7266 Sorber sound absorption baffles. Getting in/out is easy - the entry point is on the left or right side where the rear S2466x2 Sorber baffles butt up against the front A2466x6 drum shield, allowing either end panel of the S2466x2 Sorber baffles to act as a door.
All of ClearSonic's isolation booths are modular, portable, and feature full-length, flexible, yet robust plastic hinges that utilize ClearSonic's 'tooth in groove' mechanical lock to securely snap into place for a firm connection between panels, cable cutouts to easily organize cables running to your gear, sound absorbing Sorber baffles, and the highest quality ¬" thick acrylic material to provide a booth that is functional, stable, and aesthetically pleasing.
Please note: ClearSonic's booths have a gap in the rear to promote air circulation and are not 'airtight' or 100% isolated. There is about 1-2' of open space around the rear of the booth to allow for air exchange. If desired, extra pieces can be purchased to effectively close this gap and provide maximum isolation.