Continue Shopping View Cart
Markertek - The Future of Broadcast Supply

Call 800-522-2025
M-F 8:30am - 6pm ET

Markertek--Financing-Options-Banner

Secure LoginClose X

Returning Markertek Customers

New Markertek Customers





Why Create an Account?

Creating a Markertek account now will save you time on future orders. You'll have full access to your order history and a personalized shopping experience.

 
Klark Teknik DN100 Direct Injection Box with Balanced I/O
     

    Klark Teknik DN100 Direct Injection Box with Balanced I/O

    Manufacturer: Klark Teknik

    Item #: KT-DN100   •   MFG #: DN100

     

    This item is no longer available.
    Ask a Markertek Expert if you need assistance finding an appropriate substitute.

    800-522-2025Email

     
     
     

    Item unavailable. Please select another option.

    Items similar to the KT-DN100

    California Residents:
    8pt-triangleWARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov

     
     
     

    The new Klark Teknik DN100 Direct Injection Box features a ground-up redesign to provide an extended dynamic range, lower noise floor and all the world-class audio performance you'd expect from Klark Teknik. DN100 is also designed to handle the rigors of life on the road: a thick aluminum shell protects the electronics, and this in turn is protected by a tough silicone rubber casing, which is replaceable and available as a spare part.There's also a security slot to to secure the DN100 using Kensington MicroSaver security cable.

    * The DN100 has been designed to allow use at phantom voltages less than +48V. The unit will function down to +20V (when used with 6k8 dropping resistors) but with reduced headroom and dynamic range. All the specifications above are quoted using standard +48V Phantom power.

     
    • Specifications

      • Input
      • Type active electronic, balanced or unbalanced
      • Impedance 1M O nominal, balanced or unbalanced (jack connectors) 20K Ohms (XLR input only)
      • Connectors 2 quarter inch jacks and 3-pin XLR linked in parallel
      • Maxmum level 30dBu
      • Attenuator 30dB switchable
        Output
      • Type Transformer Isolated, balanced
      • Impedance 300 Ohms
      • Connector 3 pin XLR
      • Max. Level 10dBu with load >2k Ohms
      • Min. load 600 Ohms
        Performance
      • Noise -100dBu, 20Hz to 20kHz unweighted, with input terminated by 10k resistor
      • Frequency response +0.5/-1dB 20Hz to 20kHz
      • Distortion (THD+N) output <0.01% @ 1kHz, +4dBu
        Power Requirement
      • Voltage +48V Phantom *
      • Current consumption <10mA
        Dimensions
      • Length 142mm (5.6 inch)
      • Width 106mm (4.2 inch)
      • Height 60mm (2.35 inch)
      • Weight <1kg
       
    • GTIN:

      0748252169648
       
     
     
     
    Please fill out the information below
    Email Address*