Radial Engineering R800 8030 Relay Xo Balanced Remote Active Output Switcher - Power Supply Included

ITEM #: RAD-R800-8030 MFG #: R800 8030

Primary Image
  • Product Image Thumbnail 1 of 5
  • Product Image Thumbnail 2 of 5
  • Product Image Thumbnail 3 of 5
  • Product Image Thumbnail 4 of 5
  • Product Image Thumbnail 5 of 5
Free Shipping with $49 Minimum Order

List Price:

$360.00

Our Price:

$299.99

Availability: Usually Ships in 5-14 Days.
Please Email, Chat or Call (800) 522-2025 for Detailed Delivery Info
iAvailability Description Popup


R800 8030 - Overview

The Radial Engineering Relay Xo is an audio switcher designed to route balanced mic or line-level signals between two separate destinations, with the ability to be operated remotely with an optional JR-1 footswitch.

The Relay is basically a 1-in, 2-out straight-wire switcher for balanced audio.There is no transformer or buffering circuitry in between the input and outputs.This means the Relay Xo can not introduce distortion or noise into the source signal and allows it to be used with mic or line level sources. A link feature allows multiple Relay Xo units to be combined and switch stereo or multichannel audio systems. Switching can be done on the Relay Xo, via remote footswitch or by MIDI contact closure.

When artists employ wireless microphones on tour, the receivers are typically located off stage. The remote input on the Relay Xo allows it to be connected next to the wireless receivers to reduce cable clutter, while still providing control to the artist on stage with a remote footswitch. Two versions of the Radial JR1 footswitch (sold separately) are available for use with the Relay Xo; the JR1-M with a momentary switch that will activate output-B as long as the footswitch is held down, and the JR1-L with a latching switch that will hold on the last selected output.

  • Features:

    • Redirects mic signal to communicate with techs
    • Allows artist to speak with musicians and techs
    • Remote controllable with optional footswitch
    • Link output to switch multiple units at once
     
  • Specifications:

    • Audio Circuit Type: Remotely controlled mechanical relay
    • Frequency Response: 10Hz - 100kHz
    • Dynamic Range: > 140dB
    • Gain: 0dB
    • Total Harmonic Distortion: < 0.0005%
    • Intermodulation Distortion: 0.001%
    • Input Impedance: Source dependent
    • Output Impedance: Source dependent
    • Common Mode Rejection Ratio: -106dB
    • Noise Floor: -115dBu
    • Maximum Input: 26dBu
    • Input Connectors: XLR-F input
    • Output Connectors: 2x XLR-M outputs
    • Extras:
      - Combo (XLR-F & ¼" ) and ¼" loop-through remote connectors
      - Contact Closure Function: With ¼" TRS jack, short tip and ground to switch With XLR, short pin-1 ground and pin-2 Hot to switch
    • Construction: 14 gauge steel with internal I-beam
    • Size (LxWxD): 5" x 3.3" x 1.8" (127mm x 84mm x 45.5mm)
    • Weight: 1.4lbs (0.6kg)
    • Shipping Size (LxWxD): 6.5" x 4" x 3" (165mm x 102mm x 76mm)
    • Shipping Weight: 2.4lbs (1.08kg)
    • Power: 15V DC, 30mA, center-pin (+)
    • Conditions: For use in dry locations only between 41°F (5°C) and 104°F (40°C)
     
  • Warranty:

    • 3 Year Transferable Warranty
     

R800 8030 - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov