Where to Buy Radio Design Labs | RDL Rack-Ups, Stick-Ons & More

RDL TX-AFC1M Unbalanced to Balanced Audio Transformer - RCA / XLR

The RDL TX-AFC1M is the ideal choice in certain applications requiring studio quality transformer coupling between an unbalanced audio source and balanced equipment. This module is passive and does not add gain to the converted signal. Numerous active RDL modules are available to produce unbalanced to balanced conversion while changing the level from -10 dBV and +4 dBu. The TX-AFC1M is a single channel (mono) module featuring a phono jack input and male XLR output. A studio quality audio...

Free Shipping with Minimum Order Banner

Our Price: $132.35

Availability: Typically Ships in 3-10 Business Days

Add to Wish List

RDL TX-MVX Manual Remote Controlled Video Switch - 2x1 - BNC

Item# TX-MVX

The RDL TX-MVX is the ideal choice in installations where either a manual switch or an open-collector must switch video signals. VIDEO A is normally connected to COMMON. When the TRIG terminal is pulled to ground, VIDEO B is connected to COMMON and VIDEO A is disconnected. The TX-MVX utilizes a high-quality RF relay allowing the module to either route a single video source to one of two destinations, or switch two video sources to a single video destination. The actual switch (or other module...

Free Shipping with Minimum Order Banner

Our Price: $141.23

Availability: In Stock

Add to Wish List

RDL ST-DA3 Line Level Distribution Amplifier - 1x3

Item# ST-DA3

The RDL ST-DA3 gives you the advantages of an audio distribution amplifier PLUS you can put it where you need it. The ST-DA3 allows bridging of any audio line, adjusting the gain, and driving up to three high or low impedance, balanced or unbalanced loads. The ST-DA3's wideband circuitry produces the unsurpassed pure clarity, low-distortion and low-noise for which RDL products are known. The ST-DA3 features RDL's SupplyFlex power input configuration. The module will operate directly from...

Free Shipping with Minimum Order Banner

Our Price: $201.39

Availability: In Stock

Add to Wish List

RDL AV-LN4 4 Input Line Level Audio to Dante Network Interface

Item# RDL-AV-LN4

The RDL AV-LN4 is an interface that converts four line-level XLR inputs to Dante network audio channels. Special software is not required to configure the AV-LN4. A dual-LED VU meter displays the level for each. The AV-LN4 is a professional grade product for studio quality fidelity and low noise performance. The AV-LN4 may be powered from an external 24 Vdc power supply, available separately. The AV-LN4 is equipped to operate from a PoE enabled network switch. The AV-LN4 will reserve power...

Free Shipping with Minimum Order Banner

Our Price: $685.19

Availability: Typically Ships in 3-10 Business Days

Add to Wish List

RDL RU-MLB4 Mic/Line Bi-Directional DANTE Network Interface

Item# RDL-RU-MLB4

The RDL RU-MLB4 modules are Dante audio network interface products compatible with microphones and line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations. Application The RU-MLB4 is a high quality converter that provides professional line-level outputs from four Dante network received audio channels. It also converts four professional...

Free Shipping with Minimum Order Banner

Our Price: $843.13

Availability: In Stock

Add to Wish List

RDL AV-HK1 HUM KILLER Stereo Audio Isolation Transformer

Item# AV-HK1

The AV‑HK1 is a stereo transformer isolation module for use with unbalanced, high impedance audio inputs. Input and output connections are provided on gold‑plated phono jacks. The AV‑HK1 is supplied with two adapter cables to facilitate connecting with products that use mini‑plugs and jacks. The shield connection of each INPUT jack is electrically isolated from the case and from the output ground. The shield connection of each OUTPUT jack is connected to the case shield....

Free Shipping with Minimum Order Banner

Our Price: $128.11

Availability: Typically Ships in 3-10 Business Days

Add to Wish List

RDL STM-1 Microphone Preamplifier - 50 dB Gain

Item# STM-1

The RDL STM-1 is a low-cost quality microphone preamplifier designed for use in commercial sound and broadcast applications. The compact size makes it ideal where a larger or heavier preamp cannot be used. The high-performance circuit provides a fixed 50 dB gain to bring any mic-level signal up to the line-level range of nearly any line input. The STM-1 supply input is single ended and operates from 24 to 33 Vdc. Operation from 12 Vdc is possible with a 6 dB reduction in headroom. For intercom applications,...

Free Shipping with Minimum Order Banner

Our Price: $149.96

Availability: In Stock

Add to Wish List

RDL RU-VSX4 Video Switcher - 4x1 - BNC

Item# RU-VSX4

The RU-VSX4 is the ideal choice in most applications where four video signals need to be switched to a single output. The RU-VSX4 has two rear panel-jacks for each of the four video bridging input stages. One jack is for the input signal; the other is a loop-through output of the source signal. If 75 Ohm termination of the input signal is required, the terminator (provided) is plugged onto the LOOP OUT jack. The output video signal is 75 Ohm back-terminated to provide unity gain into a 75 Ohm terminated...

Free Shipping with Minimum Order Banner

Our Price: $495.12

Availability: Typically Ships in 3-10 Business Days

Add to Wish List

RDL RU-ASX4D 4x1 Stereo Balanced Audio Switcher - Terminal Block

Item# RDL-RU-ASX4D

The RDL RU-ASX4D is a four channel stereo audio selector with input gain adjustments and output level metering. The inputs and outputs are connected on rear-panel detachable terminal blocks. Each of the four stereo line level inputs accepts either a balanced or an unbalanced signal. Each input is equipped with a rear panel screwdriver-adjustable input gain trimmer. Input signal levels between -15 dBV and +8 dBu may be set to the proper operating level as indicated by a stereo dual-LED...

Free Shipping with Minimum Order Banner

Our Price: $409.12

Availability: In Stock

Add to Wish List

RDL SF-ND2 Two Dante Network Audio Channels to Stereo Digital Audio Output Interface

Item# RDL-SF-ND2

The RDL SF-ND2 is a digital audio interface that converts two Dante network audio channels to a stereo digital audio output. The output is switch-selectable to provide an AES/EBU on XLR, or coaxial and optical S/PDIF. The switch enables the appropriate output jack and any required electrical and data format conversion. Special software is not required to configure the module. The SF-ND2 is a professional grade product for studio quality performance. The SF-ND2 is PoE powered....

Free Shipping with Minimum Order Banner

Our Price: $468.52

Availability: Typically Ships in 3-10 Business Days

Add to Wish List

Radio Design Labs

By Category

By Price Range

Filter By

Narrow Products

By Category

By Price Range

Filter By

RDL TX-AFC1M Unbalanced to Balanced Audio Transformer - RCA / XLR

RDL TX-MVX Manual Remote Controlled Video Switch - 2x1 - BNC

RDL ST-DA3 Line Level Distribution Amplifier - 1x3

RDL AV-LN4 4 Input Line Level Audio to Dante Network Interface

RDL RU-MLB4 Mic/Line Bi-Directional DANTE Network Interface

RDL AV-HK1 HUM KILLER Stereo Audio Isolation Transformer

RDL STM-1 Microphone Preamplifier - 50 dB Gain

RDL RU-VSX4 Video Switcher - 4x1 - BNC

RDL RU-ASX4D 4x1 Stereo Balanced Audio Switcher - Terminal Block

RDL SF-ND2 Two Dante Network Audio Channels to Stereo Digital Audio Output Interface

Sign In

Radio Design Labs

Narrow Products

By Category

By Price Range

Filter By