Where to Buy Test Tone Generators

Viewing Item(s):

Display

Show As

NTI MR-PRO Minirator Analog Audio Signal Generator and Impedance Meter
NTi Audio
Item# MR-PRO
NTI MR-PRO Analog Audio Generator provides a complete set of analog audio test signals for the most demanding audio professional. In addition to all MR2 features, MR-PRO adds load impedance and phantom voltage measurements, user wave files, higher performance and cable test capability. Hand-held, using battery or external DC power supply, the generator offers a complete range of capabilities for a professional. Set-up and Maintain Audio Systems: Use the Minirator to set...
Our Price: $739.00
Availability: In Stock
Add to Wish List
Whirlwind QBOX Audio Line Tester
Whirlwind
Item# WH-QBOX
Qbox. A must have for any audio technician. The indispensable, all-in-one audio line tester is ideal for live-sound applications, maintenance, install work or anywhere audio transmits over cable. Outputs for standard headphones, a 1/4" jack for line-in or a 2k Ohm (telephone) earpiece out. A handy clip attaches the Qbox to your belt or equipment rack. Eliminate embarrassing down time by discovering audio failures before they discover your event. Simply generate or listen to audio at any...
Our Price: $465.99
Availability: In Stock
Add to Wish List
Whirlwind Cab Driver Tester - Speaker/ Polarity/ Impedance/ Pink Noise Generator
Whirlwind
Item# WW-CABDRIVER
The Cab Driver is a test device for checking the operation of the speaker components within enclosures. A pink noise signal source is sent through pushbutton selectors to an assortment of speaker connectors, including Speakon NL8 and NL4, 1/4" TS and banana jacks.The pink noise level can be adjusted to appropriate levels for subwoofers, midrange cones and compression drivers and tweeters. There is also an XLR line output for feeding the pink noise to self-powered speaker units. A DC OHMS TEST button...
Our Price: $320.34
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Gold Line GL1K 1kHz Microphone Level Input Tester
Gold Line
Item# GL-1K
The Gold Line GL1K is a miniaturized 1kHz microphone input tester consisting of a tone generator and phantom power detector built into a standard 3 pin XLR male connector. When inserted into a microphone input connector (12-48V), the LED indicator will light showing that there is a phantom power voltage present. If a voltage is present, a 1kHz tone will be sent into the microphone input. Perfect for Live Sound Applications The GL1K can be used to trace signals through a snake,...
Our Price: $97.85
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
RDL ST-NG1 White and Pink Noise Generator
Radio Design Labs
Item# ST-NG1
The ST-NG1 is the ideal choice where random white or pink noise is needed. It is suitable either as a reference noise source for audio measurements or as a masking noise source in engineered sound or counter-intelligence applications. Amplitude limiting circuitry in the ST-NG1 controls extreme peak excursions while preserving random variations of at least 20 dB. The noise generating circuitry in the ST-NG1 is truly random analog noise occupying the full bandwidth from 20 Hz to 20 kHz. This makes...
Our Price: $185.65
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Gold Line PN2W Pink/White Noise Generator
Gold Line
Item# GLDL-PN2W
The Gold Line Pink/White Noise Generator providing continuous pink or white noise. White noise has an equal amount of energy per Hz of bandwidth. Pink noise has an equal amount of energy per octave of bandwidth. Specifications: OUTPUT: Unbalanced RCA jack, impedance 620 ohms OUTPUT LEVEL: Pink noise - Continuous @ 62mV White noise - Continuous @ 62mV FREQUENCY RANGE: 20Hz - 20kHz POWER REQUIREMENTS: 9V battery APPROVALS: Emissions: - EN 55022 B - FCC Class B Immunity: - EN 55024 B SIZE...
Our Price: $194.19
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
RDL PT-AMG2 Portable Audio Signal Generator & Monitor
Radio Design Labs
Item# PT-AMG2
This RDL PT-AMG2 portable audio instrument is comprised of a precision audio oscillator, precision level meter and speaker. The 700 Hz oscillator section features two outputs. The balanced XLR output is front-panel switch selectable for MIC or LINE level (pro level). The unbalanced output operates at -10 dBV (consumer). Output stability is suited to accurate bench top audio testing. The audio metering circuit features two inputs, an LED meter and a monitor speaker. The balanced input...
Our Price: $431.25
Availability: In Stock
Add to Wish List
Tempo Communications 711K-GB Telecom Tone and Probe Kit
Tempo Communications
Item# TPO-711K-GB
Use the Tempo 711K-GB to provide a single solution for the communications technician, Tempo has developed the 711K Professional Tone and Probe Kit combining the 77GX Tone Generator and 200EP-G Inductive Amplifier in a rugged carrying case. The 77GX offers different tones and high/low power setting for tracing on open or shorted wires. The 200EP-G probe features speaker bypass when connected to butt set. Both the 77GX and the 200EP-G can be purchased separately and are part of a series...
Our Price: $129.88
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
RDL ST-RG1 Ramp Generator - 0 to 10 Vdc Output
Radio Design Labs
Item# ST-RG1
The ST-RG1 is a digitally generated 0 to 10 volt Ramp Generator which provides the ideal interface for audio volume control from multiple points with the ST-VCA2. Any number of Up and Down buttons may be connected to the ST-RG1. Sufficient drive is provided from the ST-RG1 to control up to six ST-VCA2s. Features: VCAs may be controlled from several locations with the optional RLC2 Remote Level Control panel or RUC-4 Universal Remote. LED level indicator driver circuitry is included in the ST-RG1...
Our Price: $156.57
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
NTI Cable Test Plug for MR-PRO Minirator Audio Signal Generator
NTi Audio
Item# MR-PRO-CTP
The Remote Cable Test Plug is used for single-ended cable testing. When you do not have access to the far end of a cable to loop back into the MR-PRO (e.g. cable is installed in a building), install the Cable Test Plug at the far end of the cable, the MR-PRO will be able to complete its cable test procedure and display cable condition.
Our Price: $61.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List

Audio Test Tone Generators

By Brand

By Price Range

Filter By

Narrow Products

By Brand

By Price Range

Filter By

NTI MR-PRO Minirator Analog Audio Signal Generator and Impedance Meter

Whirlwind QBOX Audio Line Tester

Whirlwind Cab Driver Tester - Speaker/ Polarity/ Impedance/ Pink Noise Generator

Gold Line GL1K 1kHz Microphone Level Input Tester

RDL ST-NG1 White and Pink Noise Generator

Gold Line PN2W Pink/White Noise Generator

RDL PT-AMG2 Portable Audio Signal Generator & Monitor

Tempo Communications 711K-GB Telecom Tone and Probe Kit

RDL ST-RG1 Ramp Generator - 0 to 10 Vdc Output

NTI Cable Test Plug for MR-PRO Minirator Audio Signal Generator

Sign In

Audio Test Tone Generators

Narrow Products

By Brand

By Price Range

Filter By