-
Item# W12GA
3 Gauges AvailableWhirlwind W12GA is a heavy duty, flexible speaker cable. The 12/4 is SJO type, and the 16/2 and 13/8 are Whirlwind-designed, small diameter cables.
Read More
Our Price: $2.09
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# WW-QBOX-AES
The Whirlwind Qbox-aes is a multipurpose testing device for troubleshooting digital AES-3, S/PDIF and analog audio signals. The Qbox-aes is composed of two sections; the Send section and the Receive/Monitor section. A Test Mode switch selects Analog or AES testing operation. In AES test mode the Receive section consists of the LED sample rate indicators and the decoder that converts the digital signal into analog for the Speaker and the Line/Phones monitor. The digital Send section...
Our Price: $629.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# WW-THS2
The Whirlwind THS 2 Talkback/Headphone Box has a single microphone output, controlled by a latching Mic On/Off switch and a momentary "Cough" switch. The microphone output is a passive, straight through connection from the microphone input. This configuration ensures that the microphone will still be live on-air, even if power to the THS 2 is lost. Works with dynamic mics only.
Headphone inputs consist of balanced left and right inputs on separate female XLR connectors. Separate...
-
Item# WH-QBOX
Qbox. A must have for any audio technician. The indispensable, all-in-one audio line tester is ideal for live-sound applications, maintenance, install work or anywhere audio transmits over cable.
Outputs for standard headphones, a 1/4" jack for line-in or a 2k Ohm (telephone) earpiece out. A handy clip attaches the Qbox to your belt or equipment rack.
Eliminate embarrassing down time by discovering audio failures before they discover your event. Simply generate or listen to audio at any...
Our Price: $230.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# WW-ISOPOD
Housed in a high impact nylon casing, the ISOPOD safely sums to mono and transformer isolates unbalanced 1/8" (3.5mm) stereo connections to balanced, XLR.
Use to create a balanced mono signal from MP3 players and computers to send to professional mixers' line inputs.
(iPodr and 3.5mm cable not included).
Our Price: $65.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# WW-THS4
The THS 4 Talkback/Headphone box is an all-purpose, fully loaded sports announcer console. Both main and talkback microphone outputs are provided, with Mic On/Off, Cough and Talkback switches for control. The talkback output is line level with a trim control and the main microphone output of the THS 4 will be live on-air if power is lost, when using dynamic microphones.
There are two inputs for the headphones with balanced and unbalanced connections.Each input has a volume control and assign...
Our Price: $470.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# WW-SBNL18442
The Whirlwind SBNL18442 is part of the SBNL Series and is a (1) NL8, (4) NL4 wired 2-pole NL Speakon Splitter Box.The SBNL series of boxes provide a convenient way to split or breakout NL Speakons for multiple speaker cabinet hookup.
Features: Specifications:
-
Item# WW-PCDI
The Whirlwind pcDI is perfect for interfacing the outputs of CD players, computer sound cards, iPODs® / MP3 players, tape decks, etc. with professional, balanced, low impedance equipment.
This unit contains two separate DIs - input your signals with one 3.5mm (1/8") mini TRS stereo jack (tip=left +, ring=right +, sleeve=common negative) or two sets of color coded RCA phono type input and through jacks. Output is via corresponding color coded XLRs.
Features: Color coded RCA phono in / through...
-
Item# SPLIT-6
Use this handy box when you need to split a line level signal up to 6 times*. Features 1 female XLR input wired to 6 male XLR outputs. Perfect when adding extra amplifiers to a system, connecting multiple powered speakers, splitting intercom lines, etc.
*Line level outputs can usually be split 6 times without noticeable loss of signal quality. The actual number of splits that can be accomplished depends on the level of the source signal and the impedances of...
Our Price: $87.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# WW-PCUSB
The Whirlwind pcUSB converts the digital audio from USB outputs to high quality analog, stereo, balanced audio for easy connection to PA systems, mixing boards, etc.
USB 2.0 compliant with no device driver requied. Operating power is supplied from the USB port in the host device. Sample rates of 32 kHz, 44.1 kHz and 48 kHz are supported at 16 bits. A USB hookup cable is included.
Digital signal is input via a standard USB Type B jack. Output is via left and right balanced XLRs. A digital 0...
Our Price: $187.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# MK425
7 Lengths AvailableWhirlwind MK cables are extremely flexible, resistant to handling microphonics and reliable under the roughest conditions. Accusonic+2 features finely stranded center conductors and braided shield for superior noise rejection. Stock lengths are 3, 6, 10, 15, 20, 25, 30, 50, and 100 ft.
Specifications: Number of conductors: 2
Conductor gauge & stranding: 22 26x36
Shield type & % coverage: B.C Braid 78%
Overall diameter (inches): .245
Nominal cap (pf/ft.)1:...
Read More
Our Price: $41.37
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List-
Item# W12/4-500
Conductors: 4
Conductor Gauge & Stranding:12 / 65x30
Overall Diameter (inches): 0.500
Jacket Material & Thickness: 0.050"
Insulation Material & Thickness: Neoprene .032" EPDM
Our Price: $895.95
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# W12/4
Heavy duty, flexible speaker cable. 12/4 SJO type Specifications: Conductors: 4
Conductor Gauge & Stranding:12 AWG / 65x30
Overall Diameter (inches): 0.500"
Jacket Material & Thickness: Neoprene 0.050"
Insulation Material & Thickness: EPDMR .032"
Weight per 100 ft. (lbs.): 18
-
Item# PA-1
The Whirlwind PA-1 is a high output, low distortion, portable monitoring device suitable for critical listening in any professional audio environment.
The PA-1 accepts either balanced or unbalanced stereo, line level signals through parallel XLR and 1/4" TRS inputs.
A switch changes the input connector configuration from separate balanced inputs to combination unbalanced (Tip/Pin2 = Left, Ring/Pin3 = Right) for accepting signals from sources such as headphone...
Our Price: $239.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# SP1X3
2 Types AvailableThe Whirlwind SP1X3 mic splitter provides one direct and two transformer isolated output from a mic level input. Each transformer isolated output on these devices features a ground lift switch. On the IMP Splitters are male XLR jacks, one female XLR jack and one switch as outlined below.
INPUT
Female XLR input jack for connection of a low impedance balanced signal such as that of a microphone.
DIRECT OUTPUT and ISOLATED OUTPUT
Male XLR jacks. The DIRECT...
Read More
Our Price: $125.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# WW-AB8
8-channel, balanced, bi-directional signal switcher, 1 in - 2 out or 2 in - 1 out per channel Features: Eight channels of balanced A - B switching for line, mic or MIDI signals.
Each of the eight channels can be individually switched or assigned to a Master Control circuit.
Master switching is controlled through front panel pushbuttons, optional footswitch or automatically triggered by loss of signal on channel one of A input.
Can be configured as two inputs to one output, one input to two outputs...
Our Price: $609.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# WD-4
2 Types AvailableSuper-large capacity reels have removable crank handles. Both feature pillow-block bearings, and the WD4D offers split reel design.
These strong, yet light, cable reels are built from heavy-gauge steel with welded frames for rugged durability.
The premium WD1-WD4 reels feature a unique adjustable braking system that controls the speed of the spool during payout and eases turning during rewind.
Read More
Our Price: $522.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# WW-HAUC
This stereo, active, compact headphone amplifier mounts under a table or counter and provides headphone volume control for broadcast applications, recording studios, language labs, etc. Features: Handles headphones from 8 to 600 Ohms with low distortion and wide frequency response.
1/4" and 1/8" headphone jacks and volume control are provided on the front panel.
Two 1/4" TRS (stereo) and one 1/8" TRS jacks on the rear for input / through connections.
Powered with 24 VDC adapter (included).
...
Our Price: $167.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# WH-MD1
The industry's standard for parabolic, boom, and interview mic situations, the MD-1 is the ideal mic preamp for those who demand studio quality in a rugged, battery operated package.
Combines a high quality mic/line input stage with a transformer isolated line driver and independent headphone amplifier. Ideal for boom, parabolic and interview mics, the MD-1 provides phantom power, local monitoring and a line-level balanced output for noise immunity over long cable runs. Housed in a rugged steel...
Our Price: $422.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# MT-8-F-M-25
2 Types AvailableThe Medusa Multitrack (MT) Series is designed to interface multitrack recorders or outboard equipment to mixing consoles.
Each Multitrack Medusa is constructed of Whirlwind multipair cable with a heat-shrunk fanout at each end, and is available with optional Snakeskin¨ for an extra charge. An alternative construction uses individually jacketed (IJ) Canare wire with Snakeskin¨ fanouts standard.
Choose from 8, 12, 16, 24 or 32 line configurations (other channel counts available special order)...
Read More
Our Price: $222.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# MICMUTE-PPD
The Whirlwind Micmute boxes offer passive switching solutions for controlling the on and off conditions of a microphone or balanced line signal via footswitch or finger switch operation.
There are three styles, which cover all the essential mic control functions. Each style of Micmute is available with two types of actuator; a heavy duty footswitch (models PT, PM, PP) and a finger operated version for desktop use (models PTD, PMD, PPD).
Each box has a female XLR input and a male XLR output...
-
Item# RMTB
The Whirlwind Director DI box is built like a tank and converts line, instruments, or speaker level signals to a clean low impedance mic level. The Director Direct Box offers a ground lift switch, switchable 30dB pad and a switchable low pass roll off filter. Hi-Z bridging input.
Our Price: $78.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# WW-CABDRIVER
The Cab Driver is a test device for checking the operation of the speaker components within enclosures. A pink noise signal source is sent through pushbutton selectors to an assortment of speaker connectors, including Speakon NL8 and NL4, 1/4" TS and banana jacks.The pink noise level can be adjusted to appropriate levels for subwoofers, midrange cones and compression drivers and tweeters. There is also an XLR line output for feeding the pink noise to self-powered speaker units. A DC OHMS TEST button...
Our Price: $217.00
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List-
Item# ISOXL
This is a professional quality compact transformer in an XLR male/female tube for quick fix line isolation. The shield is lifted from input to output.
-
Item# MK410
Whirlwind MK cables are extremely flexible, resistant to handling microphonics and reliable under the roughest conditions. Accusonic+2 features finely stranded center conductors and braided shield for superior noise rejection. Stock lengths are 3, 6, 10, 15, 20, 25, 30, 50, and 100 ft.,
Specifications: Number of conductors: 2
Conductor gauge & stranding: 22 26x36
Shield type & % coverage: B.C Braid 78%
Overall diameter (inches): .245
Nominal cap (pf/ft.)1:...
Our Price: $34.46
Availability: More on the way, usually ships in 3-10 business days
Add to Wish List
