-
Item# AT8615
2 Versions AvailableThe Audio Technica AT8615 desk stand is a heavy-duty low-profile desk stand designed for tabletop applications. The sturdy metal base is equipped with three-pin XLRF- type input and three-pin XLRM-type output connector. It is designed to fit any gooseneck microphone with a three-pin XLRM type output. The unit's heavy die-cast construction and no slip pads help minimize coupling of surface vibration while the low profile design with low-reflectance black finish provides minimum...
Read More
-
Item# M8410
For a microphone a shock mount helps reduce noise from the surrounding area, without affecting the sound of a microphone. Shock mounts are commonly used on studio microphones to prevent unwanted noise. The shock mount is used to partially isolate the mic from vibrations that might otherwise be transmitted through the mic stand, causing unwanted sounds to be added to the output signal.
Mounts to any standard 5/8" thread mount. Includes constant-tension clutch and 180 deg swivel for easy, positive...

-
Item# AT8420
Audio Technica AT8420 metal clothing clip for the AT830 lav mic. Designed to be worn as a lavalier or hidden in loose clothing or in the hair, the MT830 provides high intelligibility for lecturers, stage/TV performers and singers. The mic's wide-range capability ensures clean, accurate reproduction. It operates on phantom power only.
Fits Audio-Technica Case Style(s): M7.

-
Item# AT8434
Audio Technica AT8434 metal clothing clip for the AT829 lav mic.The AT829 is a wireless clip-on/lavalier condenser microphone with a cardioid polar pattern. It is designed for professional business presentations, public speaking and theater performances.
The microphone is intended to be worn on the clothing for excellent yet unobtrusive sound pickup. The wide-range capability of the microphone ensures clean, accurate reproduction with high intelligibility for speakers, presenters...

-
Item# AT-8442
Whether you're using a lav or headset mic and mobility is a factor the Audio Technica AT8442 plastic clothing clip can be a valuable asset. The cable on these types of mics can sometimes get in the way during a performance or presentation. Keep the cable out of your way and make sure your mic stays right where it's supposed to be. Dress your mic cable neatly onto your lapel, shirt or colllar using the AT8442.
Fits Audio-Technica Case Style(s):M38

-
Item# AT-AT8449A
The AT8449A is a microphone shock mount designed to be used with the AT4033a, AT4040, AT4047MP, AT4050 and AT4050ST microphones and fits the R1 case style. This shock mount attenuates noise, shock and vibration transmitted through mic stands, booms and mounts.
Features: Compatible with 3/8"-16 and 5/8"-27 threaded stands
Specifications:

-
Item# AT-AT8461A
The Audio-Technica AT8151A are Windscreens for AT898 and AT899 models (3-pack) (black).

-
Item# AT-AT8464X
The Audio-Technica AT8464x dual-ear adapter kit converts a single-ear "x" version MicroSet® headworn microphone to a unit that's worn on both ears for maximum stability and comfort. The headband easily adjusts to fit both children and adults.
Available in black (AT8464x) and beige (AT8464x-TH). Features: Fits Audio-Technica Case Style(s): M31, M40

-
Item# AT-AT8464X-TH
The Audio-Technica AT8464x-TH dual-ear adapter kit converts a single-ear "x" version MicroSet® headworn microphone to a unit that's worn on both ears for maximum stability and comfort. The headband easily adjusts to fit both children and adults.
Available in black (AT8464x) and beige (AT8464x-TH).
Features: Fits Audio-Technica Case Style(s): M31, M40

-
Item# AT-AT8473
The Audio Technica AT8473 is a Quick-mount stand adapter. This adapter permits mounting a gooseneck mic with a 18.9mm base to a standard 5/8"-27 or 3/8"-16 threaded mic stand or mounting flange. This adapter fits Audio-Technica M26, M27, M34 and M35 case style(s).
Compatible with:
ES915SC21
ES915ML24
ES915C15
ES915ML15
ES915SML15
ES915SC15
ES915H21
ES935SH6
ES935ML6 Features: Specifications:

-
Item# AT-AT8664
The Audio-Technica AT8664 is an A-mount cable pass-through adapter. Use this in conjunction with the AT8663 flange and hide that mic cable mess. This adapter fits M2 and M33 Audio-Technica case style(s).
Compatible with:
U857AU
U857RU
U857RLU

-
Item# AT8405A
The Audio-Technica AT8405a Snap-in Microphone Stand Clamp is a standard microphone mount, designed for 5/8"-27 threaded stands. The AT8405a will accommodate any 0.82" (21mm) diameter microphone and features a pivoting action for accurate placement.
Features: Fits microphones with 21 mm body diameter
Compatible with 5/8"-27 threaded stands

Our Price: $14.95
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
-
Item# AT8411
The Audio-Technica AT8411 is a Lavalier plastic clothing clip that fits the M1 Audio-Technica Case Style.

-
Item# AT8416
The Audio-Technica AT8416 shock mount effectively isolates mounted microphones from impact vibration and shock handling noise. It is intended for use with microphones mounted on lecterns, pulpits, conference tables and similar surfaces. Designed especially for UniPoint gooseneck microphones, it may be used with other lightweight microphones as well.
The use of a shock mount is particularly important in any application where wide-range sound equipment is used, and where highlevel low-frequency...

-
Item# AT8417
Clothing clip, wire.
Fits Audio-Technica Case Style(s): M1

-
Item# AT8418
AT8418 -- Rubber-grip spring clamp holds mic securely to instrument without marring the finish. Flexible boom permits aiming the microphone in any direction. Cable strain relief reduces cable-transmitted noise and cable damage. Fits Audio-Technica Case Style(s): M1, M8, M12.
AT made this mount to fit the ATM350 and the Pro35 but will also fit the Audio Technica AT831b Lavalier mic and similar styles.

-
Item# AT8435
The AT8435 is a plastic Lavalier microphone clip designed to keep the Lavalier mic fastened to clothing. Specifications: Clothing Clip: Plastic
Color: Black

-
Item# AT8440
Whether you're using a lav or headset mic and mobility is a factor the Audio Technica AT8440 clothing clip can be a valuable asset. The cable on these types of mics can sometimes get in the way during a performance or presentation. Keep the cable out of your way and make sure your mic stays right where it's supposed to be. Dress your mic cable neatly onto your lapel, shirt or colllar using the AT8440.
Fits Audio-Technica Case Style(s): M31, M40

-
Item# AT8452
2 Colors AvailableTurn your Audio Technica lavalier/Lapel or shotgun mic into an overhead choir mic in an instant with the AT8452 wire mic hanger. A clever little adapter concieved by Audio Technica specifically for overhead applications.
Fits Audio-Technica Case Styles: M14, M25. Available in black or white. Shown above with the ES933ML and the ES933PMC (not included).
Read More
-
Item# AT8459
With its all metal construction and infinite positioning possibilies, the Audio Technica AT8459 is a must have for studio or stage. Point that mic in any direction you want and tighten it up for a secure vantage point. No more fussing with the boom arm or stand. Get the overheads just right, position the room mics in a flash or get the right off axis rejection for micing the guitar amp. Also works great with boompoles and shockmounts for ENG or foley work.
Features: Dual swivels provide unlimited...

-
Item# AT8484
The AT8484 is designed to be used with the BP40 Large Diaphragm Dynamic Vocal Microphone.
Features: Attenuates noise, shock and vibration transmitted through mic stands, booms and mounts.
Inner shock mount ring rotates to engage ball bearings that lock microphone in place.
Compatible with 5/8"-27 threaded stands.

-
Item# AT8601
As it is with everything, a strong foundation is the basis for building anything worthwhile. If your building a recording empire the best place to start is right there on your desktop. Start with the Audio-Technica AT8601 microphone desk stand, add the Audio-Technica ATR2500 USB mic and you're on your way to what may prove to be a very lucrative career. It's compatible with 5/8"-27 threaded stand clamps.
Shown above with the ATR2500-USB (sold seperately)

-
Item# AT8646QM
Audio-Technica shock-mount plates effectively isolate mounted microphones from impact vibration and mechanical noise normally transmitted from the surface. They are intended for use with microphones mounted on lecterns, pulpits, conference tables and similar surfaces. Designed especially for UniPoint gooseneck microphones, they may be used with other lightweight microphones as well.
All three models, AT8646AM, AT8646QM, AT8647QM/S incorporate a sturdy yet flexible suspension...

-
Item# AT8662
For a microphone a shock mount helps reduce noise from the surrounding area, without affecting the sound of a microphone. Shock mounts are commonly used on studio microphones to prevent unwanted noise. The shock mount is used to partially isolate the mic from vibrations that might otherwise be transmitted through the mic stand, causing unwanted sounds to be added to the output signal.
Features:
Intended for use with gooseneck microphones mounted on lecterns, pulpits, conference...

-
Item# AT8663
Big things come in small packages!
It may be just a flange you say but think of where the broadcast world would be without them. Let's start out with Presidential debates. In the early years of TV these helped hold the mics firmly up to mouths of our greatest leaders. Lets take a look at the Oscars, the Grammys, all of the awards shows for that matter. These little marvels enable the mounting of microphones and goosenecks to tables or podiums so when you need to scroll on your...
