-
Item# ATT-448
This switchable input attenuator is great for stepping-down input level to a mixer when the level is too hight. Maybe you've got a hot microphone in front of a loud source, and you're "pegging the meters" at the board. Just insert the ATT-448 attenuator in the line between the mic and the board, and switch in the appropriate amount of attenuation to match the level the board wants to see. You can choose 20, 30, or 40dB of signal reduction, for a wide range of uses on stage and in the studio.

-
Item# CDL-313
Mix-down or transfer of digital recordings from on manufacturer's digital recorder to another's ins't always straight forward. Some manufacturers' Digital Work Stations, sound Cards or DAT recorders have only S/PDIF outputs, and some offer only AES/EBU inputs, or vice versa.
The CDL-313 by Hosa is a high quality, digital link, allowing simultaneous transfer of two channels of digital-audio in either to both directions between AES / EBU (XLR) and S/PDIF (RCA). Now, even though some digital recorders...

-
Item# DIB-443
The Sidekick Passive DI Box by Hosa Technology makes it easy to connect your guitar, bass, or keyboard directly to a mixing console! It features an isolation transformer that transforms an instrument-level signal to a line-level signal. It works with each of the following:
Electric guitars, basses, and keyboards
Pedal effects and effects processors
Any electronic musical instrument with a mono phone output
Use the Sidekick to "go direct" for a pure, clean, noise-free tone that is perfect...

-
Item# GLT-255
This adaptor is designed to eliminate interference associated with ground loops. Pin 1 is lifted resulting in an ungrounded signal.
Features: Defeats the ground in balanced and un-balanced audio lines.
Can stop humming and buzzing caused by ground loops.
No ground to chassis.

-
Item# HOS-MWS-225
The Hosa MWS-225 Microphone Windscreen is ideal for ball-style microphones. Features: Specifications:

-
Item# MHR122
Hosa MHR-122 is a spring clamp type made for microphones.
Features: Spring clamp type microphone clip, fits virtually any microphone
Adjustable angle, brass insert with 5/8"-27 thread
3/8" Female to 5/8" Male threaded adapter included
Black

-
Item# MIT-156
XLR 3-Pin Female to 3.5 mm TRS male. 1.5 ft Matches 600 Ohm output to 2.5K input and may be used to connect a microphone to a portable recordingdevice, camcorder, or PC.

-
Item# MMH-346
Universal microphone holder allows convenient access to 4 ball microphones. Slots provide easy cable routing for a speedy setup during press conferences, interviews and more! Mounts on standard microphone stand. (Microphones and stand not included)

-
Item# ODL-312
Mix-down or transfer of digital recordings from one manufacturer's digital recorder to another's isn't always straightforward. Some digital work stations, sound cards or DAT recorders have S/PDIF optical outputs, and some offer only AES/EBU inputs, or vice versa. The ODL-312 by Hosa is a high quality, converter, allowing simultaneous transfer of two channels of digital audio in either format in both directions. the Hosa ODL-312 converts between AES/EBU (XLR) and S/PDIF (TOSlink fiber optic). With...

-
Item# SLW-33
Switch back and forth, noiselessly, between up to three powered monitors. The versatile design has 1 IN (source) and 3 OUT (destination), but can be used in reverse to give you 3 IN (multiple sources) to 1 OUT (a single destination). The SLW-33 provides 1/4" Tip-Ring-Sleeve (TRS) phone jacks for easy connecting. No power required. Rugged metal enclosure.
