Where to Buy Matthews | Studio C-Stands, Dollies, Clamps

Viewing Item(s):

Display:

Viewing Item(s):

Display

Show As

Matthews 209078 Patriot Wrench with 7 Common Cutouts for Wing Nuts/Hex Nuts/Square Bolts - 7/8 / 9/16 / 1/2 / 3/8 / 5/16
Item# MSE-209078
The Matthews Patriot Wrench combines 7 of the most common cutouts for the professional rigging industry into one low profile tool. Wing nuts, hex nuts and square bolts can be easily adjusted with this thoughtfully designed wrench. A lanyard hole is featured to ensure grid clamps, pipe clamps, bale blocks and more are safely configured when working overhead. The Patriot Wrench is fabricated from 6061-T6 aluminum and is hardcoat type 3 anodized to ensure a lightweight yet durable tool.
Our Price: $39.99
Availability: In Stock
Add to Wish List
Matthews 7000 Steel 1/4-20 Female to 5/8-inch Baby Pin
Item# MSE-7000
Matthews 7000 is a Steel 1/4-20 Female to 5/8-inch Baby Pin.
Our Price: $9.80
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 209632 5/8-Inch Baby Snap-In Pin for Mafer and Super Mafer Clamps
Item# 209632
The Matthews 209632 is designed to work with the Mafer & Super Mafer Clamp when mounting light fixtures. It's hexagonal cap fits directly into the clamp and gives you a 5/8" lighting stud at the opposite end.
Our Price: $11.60
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 15 lb. Water Repellant Sandbag - Empty - Orange
Item# 29959E
Sandbags are used whenever you need extra weight to prevent tipping. You usually "bag" stands, especially when the weight is off center, such as with a heavy Scrim. They help stabilize equipment in windy situations and can counter balance Boom Arm applications. Matthews fills our Sandbags with sanitized sand to prevent algae growth if they get damp. The empty bags are completely sewn except for a 1" seam, left open for the user to fill and then sew closed. This can save on the shipping charges,...
Our Price: $37.40
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 25 lb. Water Repellant Sandbag - Empty - Orange
Item# 29960E
Sandbags are used whenever you need extra weight to prevent tipping. You usually "bag" stands, especially when the weight is off center, such as with a heavy Scrim. They help stabilize equipment in windy situations and can counter balance Boom Arm applications. Matthews fills our Sandbags with sanitized sand to prevent algae growth if they get damp. The empty bags are completely sewn except for a 1" seam, left open for the user to fill and then sew closed. This can save on the shipping charges,...
Our Price: $39.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 350584 Mini Grip Head
Item# 350584
The Matthews Mini Grip Head 350584 is a light weight composite mini grip head that is Matthews' strong! It will fit on all 5/8" baby spuds, or light weight 3/8" stands. It's jaws hold flags and scrims...anything with up to a 3/8" diameter shaft.
Our Price: $30.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews Studio Group 429618 Baby Pipe Clamp with 5/8 Inch Pin and Safety Chain
Item# 429618
Pipe Clamps have a uniquely designed hook that keeps the clamp on the pipe even with a light fixture attached. The Baby Pipe Clamp has a uniquely designed hook molded into the clamp, which keeps the clamp on the pipe even with a light fixture attached while the bolt is being tightened. The Baby Pipe Clamp terminates in a 5/8" Pin with a safety chain and cotter pin attached.
Our Price: $47.00
Availability: In Stock
Add to Wish List
Matthews 429619 Junior Pipe Clamp
Item# 429619
Need to hang lights in tight spaces? The Junior Pipe Clamp is the perfect answer! It features a uniquely designed hook that's fully molded into the clamp. That hook helps keep the clamp secure on the pipe even while an attached light fixture bolt is being tightened. The Junior Pipe Clamp is terminated with a Junior Receiver and has a safety chain and cotter pin attached.
Our Price: $81.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 40in C-Plus Stand w/Turtle Base Includes Grip Head and Arm
Item# 756140
2 Colors Available
Century Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial lighting, the stages would revolve to allow for continuous overhead lighting from the sun. Large reflectors would be positioned to bounce back or kick the overhead light up onto the stage and illuminate the set and actors. These reflectors were made in many sizes, but it seems the most...
Read More

Our Price: $288.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews B389788 Medium Duty Stand Kit with Brake - Black
Item# B389788
Designed primarily for their use in lighting kits these stands are compact and light weight. They are ideal for assembling custom lighting kits or as a replacement. Many MSE Kit Stands employ a brake shoe system for locking off the riser tubes as opposed to pinch castings therefore permitting the use of heavier fixtures.
Our Price: $108.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 429039 Chain Grip with two 5/8 Inch Pins
Item# MSE-039
2 Versions Available
The Matthews Studio Equipment Chain Grip provides maximum gripping power on any size pipe up to 6" in diameter. The Locking Pliers also provides maximum gripping power on both flat and round surfaces with smaller diameters. EXTREME CAUTION must be taken when the 5/8" pin provided on the adjustment screw is used. Be sure that any off-center weight is toward the locking direction (clockwise); allowing more weight on the other side could loosen the jaws.
Read More
Our Price: $94.80
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 159021 Solid Frame Scrim - 48x48 Inch - White 1/4 Stop Silk
Item# MSE-159021
The Matthews 159021 is a solid frame scrim to keep weight to a minimum and yet get maximum strength, all Matthews Solid Frames are made of 3/8" thin wall tubing. The mounting pin is solid rod. Matthews Solid Frames stainless steel for durability. All Matthews Scrims and Flags are bordered with heavy duty color coded webbing. All 48" x 48" Solid Frames Scrims weigh 4lbs. Features: Specifications: Fabric: White 1/4 Stop Silk Size: 48 inch x 48 inch (122 x 122cm) Approx. Light...
Our Price: $152.40
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Matthews 169001 30 Inch x 36 Inch Flag
Item# MSE-169001
Newly designed 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In addition, the 48"x48" frames have been squared off with the removal of the mouse ears. Flags are square or rectangular frames with mounting pins attached and covered with a solid cloth material....
Our Price: $100.40
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 169004 18 Inch x 48 Inch Cutter Flag
Item# MSE-169004
The Matthews 169004 is a 18" X 48" Cutter. Newly designed 90 degree Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In addition, the 48" x 48" frames have been squared off with the removal of the mouse ears. Flags are square or rectangular frames with...
Our Price: $111.90
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 169010 24 Inch x 30 Inch Flag
Item# MSE-169010
Newly designed 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In addition, the 48"x48" frames have been squared off with the removal of the mouse ears. Flags are square or rectangular frames with mounting pins attached and covered with a solid cloth material....
Our Price: $100.20
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 169059 18 Inch x 24 Inch Flag
Item# MSE-169059
Newly designed 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In addition, the 48"x48" frames have been squared off with the removal of the mouse ears. Flags are square or rectangular frames with mounting pins attached and covered with a solid cloth material....
Our Price: $92.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 169062 24 Inch x 36 Inch Flag
Item# MSE-169062
Newly designed 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In addition, the 48"x48" frames have been squared off with the removal of the mouse ears. Flags are square or rectangular frames with mounting pins attached and covered with a solid cloth material....
Our Price: $109.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 199101 Cello Cucoloris Color Filter - 18 x 24 Inch
Item# MSE-199101
The Matthews Studio Equipment 199101 Cucoloris is used to create shadow patterns on backgrounds or subjects. A flat lit wall can be broken up into interesting pools of light and shadow. Lighting directors frequently use them to simulate sunlight filtering through trees. While the wood "cookies" create a distinctive pattern, the Cello "cookie" projects a more subtle pattern. The pattern itself depends on the distance of the light source and the distance to the background. Specifications:...
Our Price: $101.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 249564 Mini Slider Light Stand - Steel Tubes/Steel Legs/Military Black Chrome - Machined/Welded Junior Receiver
Item# MSE-249564
The Matthews Studio Mini Slider Light Stand features Steel Tubes, Steel Legs, Military Black Chrome; and a Machined, Welded Junior Receiver. Capacity up to 80lbs (36kg). Features: Thick threaded collars ensuring a solid bite from t-handles and set screws. Stay put T-handles wont fall out of riser castings. V-shaped brass brakes ensuring 3-point strong contact. Machine welded junior receiver. Specifications: Minimum Height: 20" (51cm) vs 24" (61cm) Maximum...
Our Price: $303.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 259531 Full Size Mini Apple Box - 8inH x 12inW x 10inL
Item# MSE-259531
4 Sizes Available
Matthews Apple Boxes are one of the most ubiquitous and useful pieces of equipment on a film set. They are used for anything that needs to be propped up or supported temporarily. They can be used to prop up furniture and light stands, for leveling camera dolly track, or to provide temporary seats, workbenches, or stepladders. You can nail wall plates to them to hold low angle lighting fixtures and a multitude of other purposes. Matthews Apple Boxes are constructed of industrial grade plywood. Often...
Read More

Our Price: $46.50
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
Matthews 259535 Full Size Apple Box - 8inH x 12inW x 20inL
Item# MSE-259535
4 Sizes Available
Matthews Apple Boxes are one of the most ubiquitous and useful pieces of equipment on a film set. They are used for anything that needs to be propped up or supported temporarily. They can be used to prop up furniture and light stands, for leveling camera dolly track, or to provide temporary seats, workbenches, or stepladders. You can nail wall plates to them to hold low angle lighting fixtures and a multitude of other purposes. Matthews Apple Boxes are constructed of industrial grade plywood. Often...
Read More

Our Price: $67.00
Availability: In Stock
Add to Wish List
Matthews 259570 2-Inch Elephant Block Set with Holder - 10-Piece Set
Item# MSE-259570
2 Sizes Available
Take a really abstract approach to an already field-proven design and you get a product with a 'footprint' that offers greater stability. As a result of having a larger surface area and by having three feet, it makes leveling a whole lot easier! Matthews just couldn't call it anything else - Elephant Blocks! Manufactured of the highest quality 9-ply 'Baltic Birch' plywood, The Matthews 259570 Elephant Blocks replace conventional Basso Blocks. The improved design allows them to stack in...
Read More
Our Price: $382.60
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 299553E 25lb. Empty Sand Bag / Weight Bag Cordura Black
Item# MSE-299553E
Sandbags are used whenever you need extra weight to prevent tipping. You usually "bag" stands, especially when the weight is off center, such as with a heavy Scrim. They help stabilize equipment in windy situations and can counter balance Boom Arm applications. The empty bags are completely sewn except for a 1" seam, left open for the user to fill and then sew closed. This can save on the shipping charges, however, the user will require a heavy duty machine to sew the sandbag closed properly....
Our Price: $32.10
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 299559E 15lb Cordura Black Sandbag - Empty
Item# MSE-299559E
Matthews 299559E Sandbags are used whenever you need extra weight to prevent tipping. You usually "bag" stands, especially when the weight is off center, such as with a heavy Scrim. They help stabilize equipment in windy situations and can counter balance Boom Arm applications. Matthews fills our Sandbags with sanitized sand to prevent algae growth if they get damp. The empty bags are completely sewn except for a 1" seam, left open for the user to fill and then sew closed. This can save on...
Our Price: $26.20
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 299887 10 Pound Boa Bag
Item# MSE-299887
Matthews introduces a new concept to a well established piece of grip equipment - BOA BAGS. This versatile steel shot bag quickly wraps around the base of any stand, column, brace, T-handle, arm, or boom. Specifications: Design: Hanging Bag Weight Capacity: 10 lb / 4.5 kg Number of Bags: 1 Fill Material: Shot Closure Type: Sealed Material: Nylon
Our Price: $55.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 309084 O/H 6x6 Foot Butterfly/Overhead Silk Artificial White Fabric
Item# MSE-309084
Use the Matthews 309084 Butterfly/Overhead aritifical silk fabric to soften, diffuse direct light, and introduce a significant amount of ambient bounce. Specifications: Fabric Width: 60" Light Loss: 1.6 stops Webbing: Gold Safety: Flame retardent
Our Price: $104.70
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 309619 8x8 Foot Bleached Muslin Seamless Fabric
Item# MSE-309619
Matthews 309619 is an 8x8' Bleached Muslin Seamless Fabric. This can be used as a flat white reflector or used for heavy diffusion of light. All fabrics were tested in a black chamber with an incandescent light source at one end and the fabric positioned 2/3 of the way between the source and the digital meter.
Our Price: $223.60
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 309624 8x8 Foot Unbleached Muslin - Seamless Fabric
Item# MSE-309624
Matthews 309624 8x8' Unbleached Muslin & Seamless Fabric. All fabrics were tested in a black chamber with an incandescent light source at one end and the fabric positioned 2/3 of the way between the source and the digital meter.
Our Price: $195.50
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 319010 8x8 Foot MatthBounce Fabric
Item# MSE-319010
Matthews 319010 is an 8x8' MatthBounce Fabric. This can be a soft bounce on the white side or a flat non-reflective black side. All fabrics were tested in a black chamber with an incandescent light source at one end and the fabric positioned 2/3 of the way between the source and the digital meter.
Our Price: $240.40
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 319119 8x8 Butterfly Silent Gridcloth Lite
Item# MSE-319119
Matthews makes 8'x8' Butterflys out of the best fabric on the market today. View their fabric specifications page for a quick rundown on the purpose of each fabric. Matthews 8'x8' butterflys are sized industry-standard approximate measurement of 7'8"x7'8". All fabrics are tested in a black chamber with an incandescent light source at one end and the fabric positioned 2/3 of the way between the source and the digital light meter. All Matthews Checkerboard products are cut and sewn with precision...
Our Price: $257.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 319159 20 x 20 Blue/Green Chromakey Screen
Item# MSE-319159
Matthews Studio Equipment reduces the amount of screen required for production with the 319159 laminated, reversible Chroma Key fabric, Blue on one side and Green on the reverse. The unique feature of MATT Blue/Green screens also allows for fast reversing when key background change is required. Manufactured from strictly controlled dye lot polyester fabrics that are then laminated to foam backing the MATT Screens have earned instant popularity with both video and motion picture crews as well...
Our Price: $1,032.90
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
Matthews 319161 8x8 Ft. Blue/Green Chromakey Screen
Item# MSE-319161
Matthews Studio Equipment reduces the amount of screen required for production with their laminated, reversible Chroma Key fabric, Blue on one side and Green on the reverse. The unique feature of MATT Blue/Green screens also allows for fast reversing when key background change is required. Manufactured from strictly controlled dye lot polyester fabrics that are then laminated to foam backing the MATT Screens have earned instant popularity with both video and motion picture crews as well as production...
Our Price: $356.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 319404 8x8 Foot China Silk White Fabric
Item# MSE-319404
Matthews 319404 is an 8x8' China Silk White Fabric. This fabric softens light without a great reduction of intensity and introduces a significant amount of bounce. All fabrics were tested in a black chamber with an incandescent light source at one end and the fabric positioned 2/3 of the way between the source and the digital meter.
Our Price: $369.20
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 319544 Overhead/Butterfly Fabric - White Artificial Silk - 20x20 Foot
Item# MSE-319544
The Matthews Studio Equipment 319544 is 20x20 foot overhead/Butterfly Fabric - white artificial silk. All fabrics were tested in a black chamber with an incandescent light source at one end and the fabric positioned 2/3 of the way between the source the digital light meter. Specifications: Fabric: White Artificial Silk Size: 20' x 20' (6.1 x 6.1m) Approx. Light Loss: 1.6 Stops Webbing Color: Gold Primary Use:...
Our Price: $482.20
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 319552 Connector F/1-1/2-Inch Pipe
Item# MSE-319552
Matthews offers a wide variety of Corners, Connectors, Ears, and Pins to create your own Overhead Frame on the go. As part of the design, each Hollywood Corner is gusseted for maximum strength. There is no need for cumbersome tie straps. The corners contain all tubes in a captive state, no more loose pieces that could be lost or damaged. Features: Connector for 1-1/2" Pipe Gusseted for maximum strength
Our Price: $47.20
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 339761 C+ Riser Section Only for Light Stands - 20-Inches
Item# MSE-339761
Matthews 339761 is a C+ center light stand riser. This aluminum light stand can be used with a Matthews base giving you an extra 20". Specifications: Height Range: 20 to 45" (51 x 114.3cm) Top Mount: 5/8" Stud Bottom Mount: 1-1/8" Stud Number of Sections: 3 Finish: Chrome Material: Aluminum Shipping Weight: 4.8Lbs Shipping Dimensions (LxWxH): 24.95...
Our Price: $192.80
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews Studio Equipment 339764 40In Double Riser Spring Loaded Folding C-Stand with Grip Head & Arm - Chrome
Item# MSE-339764
Matthews Studio Equipment 339764 40-inch double riser spring loaded folding c-stand with grip head & arm. Specifications: Color: Chrome and Black Finish Maximum Height: 126" (321cm) Minimum Height: 53" (134cm) Capacity: 22lbs (10kg) Weight: 11lbs (5kg) Footprint: 27.5" (70cm)
Our Price: $298.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 349581 4 1/2 In Hollywood Grip Head
Item# MSE-349581
Matthews Grip Heads feature two holes of 3/8" and 5/8" diameter and castings that offer positive lock in all directions.
Our Price: $117.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 2 1/2In Hollywood Grip Head
Item# MSE-350580
The strongest & most popular Grip Head in the industry. Guaranteed to hold. Set it and forget it! Will not slip. Plates feature two holes 3/8" & 5/8", eliminating confusion. New castings offer positive lock in all directions.
Our Price: $45.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews Road Rags II Light Modifiers
Item# MSE-350596
ROADRAGS and ROADRAGS II are a new, patented, portable lighting modification system that allows the location photographer/videographer the ability to quickly and easily duplicate studio lighting effects on location using their portable lights. ROADRAGS consists of two folding 18"x24" frames, single scrim, double scrim, artificial silk and flag with convenient carrying bag. Optional reflector panels are also available. ROADRAGS II comes with exactly the same items as original ROADRAGS except they...
Our Price: $525.80
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 350602-1 MICROGrip Base
Item# MSE-350602-1
The Matthews 350602-1 is a base for the various rod lengths of the MICROGrip series. MICROgrip by Matthews is a line of grip and mounting products that have been developed especially for the motion picture, television and photographic production industries. This broad range of products features the Matthews micro-griphead with a super-small1.25" (32mm) diameter and tapped 3/8" rods of various lengths. MICROgrip is great in the studio for table top and product imaging as well...
Our Price: $51.90
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 350602-10 MICROGrip 6-Inch Rod with 3/8-16 Male Thread
Item# MSE-350602-10
The Matthews 350602-10 is a 6-inch rod with a 3/8"-16 thread on one end that works with other coresponding rods from the MICROGrip series. MICROgrip by Matthews is a line of grip and mounting products that have been developed especially for the motion picture, television and photographic production industries. This broad range of products features the Matthews micro-griphead with a super-small1.25" (32mm) diameter and tapped 3/8" rods of various lengths. MICROgrip is great in...
Our Price: $12.40
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 350602-11 MICROGrip 4-Inch Rod with 3/8-16 Male Thread
Item# MSE-350602-11
The Matthews 350602-11 is a 4-inch rod with a 3/8"-16 thread on one end that works with other coresponding rods from the MICROGrip series. MICROgrip by Matthews is a line of grip and mounting products that have been developed especially for the motion picture, television and photographic production industries. This broad range of products features the Matthews micro-griphead with a super-small1.25" (32mm) diameter and tapped 3/8" rods of various lengths. MICROgrip is great in...
Our Price: $16.70
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 350602-2 MICROGrip 8-Inch Rod with 1/4-20 Female Thread
Item# MSE-350602-2
The Matthews 350602-2 8" MICROgrip Rods feature a matte black finish and 1/4"-20 male threads on one end and a 1/4"-20 female thread on the other end. MICROgrip by Matthews is a line of grip and mounting products that have been developed especially for the motion picture, television and photographic production industries. This broad range of products features the Matthews micro-griphead with a super-small1.25" (32mm) diameter and tapped 3/8" rods of various lengths. MICROgrip...
Our Price: $11.50
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 350602-3 MICROGrip 12-Inch Rod with 1/4-20 Female Thread
Item# MSE-350602-3
The Matthews Studio Equipment 350602-3 12" MICROgrip Rod is a rod that has a 1/4"-20 Male to 1/4"-20 Female ends. This is often used for tabletop and product photography. Many of the products can easily attach itself to the MICROgrip head, which provides all features of its 2-1/2" counterpart in a smaller form factor. There are five 3/8"-16 and five 1/4"-20 threaded rods each of which can be joined with their matching thread size to create various lengths. Other accessories in the...
Our Price: $14.50
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 350602-4 MICROGrip 20-Inch Rod with 1/4-20 Female Thread
Item# MSE-350602-4
The Matthews 350602-4 20" MICROgrip are designed for use with MICROgrip mounts and bases, positioning lighting and scrims to create dramatic and creative lighting effects with an on-camera lighting fixture or attached to a base. Tapped with standard 1/4" threading.For use with MICROgrip mounts and bases, positioning lighting and scrims to create dramatic and creative lighting effects with an on-camera lighting fixture or attached to a base. Tapped with standard 1/4" threading. MICROgrip...
Our Price: $15.90
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 350602-5 MICROGrip 4-Inch Rod with 1/4-20 Female Thread
Item# MSE-350602-5
The Matthews 350602-5 4" MICROgrip Rods feature a matte black finish and 1/4"-20 male threads on one end and a 1/4"-20 female thread on the other end. MICROgrip by Matthews is a line of grip and mounting products that have been developed especially for the motion picture, television and photographic production industries. This broad range of products features the Matthews micro-griphead with a super-small1.25" (32mm) diameter and tapped 3/8" rods of various lengths. MICROgrip...
Our Price: $11.29
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 350602-6 MICROGrip 6-Inch Rod with 3/8-16 Female Thread
Item# MSE-350602-6
The Matthews 350602-6 6" MICROgrip Rods feature a matte black finish and 1/4"-20 male threads on one end and a 1/4"-20 female thread on the other end. MICROgrip by Matthews is a line of grip and mounting products that have been developed especially for the motion picture, television and photographic production industries. This broad range of products features the Matthews micro-griphead with a super-small1.25" (32mm) diameter and tapped 3/8" rods of various lengths. MICROgrip...
Our Price: $9.70
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 350602-7 MICROGrip 20-Inch Rod with 3/8-16 Male Thread
Item# MSE-350602-7
The Matthews 350602-7 is a 20-inch rod with a 3/8"-16 thread that works with other coresponding rods from the MICROGrip series. MICROgrip by Matthews is a line of grip and mounting products that have been developed especially for the motion picture, television and photographic production industries. This broad range of products features the Matthews micro-griphead with a super-small1.25" (32mm) diameter and tapped 3/8" rods of various lengths. MICROgrip is great in the studio...
Our Price: $17.60
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 350602-8 MICROGrip 12-Inch Rod with 3/8-16 Male Thread
Item# MSE-350602-8
The Matthews 350602-8 is a 12-inch rod with a 3/8"-16 thread that works with other coresponding rods from the MICROGrip series. MICROgrip by Matthews is a line of grip and mounting products that have been developed especially for the motion picture, television and photographic production industries. This broad range of products features the Matthews micro-griphead with a super-small1.25" (32mm) diameter and tapped 3/8" rods of various lengths. MICROgrip is great in the studio...
Our Price: $15.90
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 350602-9 MICROGrip 8-Inch Rod with 3/8-16 Male Thread
Item# MSE-350602-9
The Matthews 350602-9 is a 8-inch rod with a 3/8"-16 thread that works with other coresponding rods from the MICROGrip series. MICROgrip by Matthews is a line of grip and mounting products that have been developed especially for the motion picture, television and photographic production industries. This broad range of products features the Matthews micro-griphead with a super-small1.25" (32mm) diameter and tapped 3/8" rods of various lengths. MICROgrip is great in the studio...
Our Price: $25.50
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 350605 MICROGrip Shot Bag/Filled
Item# MSE-350605
The Matthews MICROGrip Shot Bag is designed for use as a counterbalance weight for the Matthews MICROgrip line of accessories for tabletop and miniature photography. It weighs approximately 1 lb and is filled. MICROgrip by Matthews is a line of grip and mounting products that have been developed especially for the motion picture, television and photographic production industries. This broad range of products features the Matthews micro-griphead with a super-small1.25"...
Our Price: $22.90
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 350606 MICROGrip 1/4-Inch Threaded Clip
Item# MSE-350606
The Matthews 350606 is a 1/4" threaded clip that allows you to attach them to MICROGrip rods to help hold gels, foam, or scrims on set. MICROgrip by Matthews is a line of grip and mounting products that have been developed especially for the motion picture, television and photographic production industries. This broad range of products features the Matthews micro-griphead with a super-small1.25" (32mm) diameter and tapped 3/8" rods of various lengths. MICROgrip is great in the...
Our Price: $28.22
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 350610 MICROGrip 3/8-Inch to 1/4-20 Adapter
Item# MSE-350610
The Matthews 350610 is a 3/8" to 1/4" adapter to use with the MICROGrip series rods that allow you to mount monitors, lights, and other accessories. MICROgrip by Matthews is a line of grip and mounting products that have been developed especially for the motion picture, television and photographic production industries. This broad range of products features the Matthews micro-griphead with a super-small1.25" (32mm) diameter and tapped 3/8" rods of various lengths. MICROgrip is...
Our Price: $22.90
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 350611 MICROGrip Mount Basic Kit
Item# MSE-350611
The Matthews 350611 is a Basic Accessory Kit for the MICROGrip series. This accessory kit gives you the basic needs for a grip setup on set. With additional parts from the MICROGrip series, you can add on to this kit to meet and enhance your setup. This kit includes a MICROGrip base, a MICROGrip Shot Bag, 2 MICROGrip heads, and an 8", 12", and 20" MICROGrip rod. MICROgrip by Matthews is a line of grip and mounting products that have been developed especially for the motion picture,...
Our Price: $227.30
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 350612 Micro-Grip Mount Master Kit
Item# MSE-350612
The Matthews 350612 is a Master Accessory Kit for the MICROGrip series. This accessory kit gives you everything you need for 2 grip setups on set and more. With additional parts from the MICROGrip series, you can add on to this kit to enhance your setup. This kit includes 2 MICROGrip bases, 2 MICROGrip Shot Bags, 6 MICROGrip heads, a MICROGrip 1/4" to 5/8" pin, a MICROGrip 1/4" threaded clip, and 2 each of the 4", 6", 8", 12", and 20" MICROGrip rods. MICROgrip by Matthews is a line...
Our Price: $567.10
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 350614 Hot Shoe Adapter 3/8 to 1/4 Inch
Item# MSE-350614
Matthews 350614 Hot Shoe Adapter 3/8 to 1/4 Inch The MICROgrip Hot Shoe adpater takes you from 3/8" thread size to 1/4" thread size.
Our Price: $33.20
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 350626 NOGA Articulating Arm (Medium)
Item# MSE-350626
The Matthews NOGA Arms are the strongest and most versatile articulated, multi-jointed arms in the industry! The redefined 350626 is larger, longer and tougher than previous models and is perfect for holding small cameras, lights, monitors, props, basically anything that requires precise positioning on set. With one simple turn, the NOGA Arm instantly and simultaneously locks - or releases - the system's three articulated joints, making it easy both to quickly position equipment...
Our Price: $175.50
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 350627 Articulated - Multi-Jointed NOGA Arm - Large
Item# MSE-350627
The new NOGA Arms by Matthews: articulated, multi-jointed arms that are the strongest and most versatile yet in the industry, offering many more features and benefits than their predecessor. The redefined NOGA Arms are larger, longer, tougher and stronger than any other extended three-joint articulated arm on the market. NOGA Arms will hold smaller cameras, lights, monitors, props and other production accessories that require precise, extended positioning on set. With one simple turn,...
Our Price: $198.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 350635 MICROGrip 3/8-Inch to 3/8-Inch Coupler
Item# MSE-350635
The Matthews 350635 is a 3/8" to 3/8" coupler that allows you to connect the 3/8" rods in the MICROGrip series for longer rod extensions. MICROgrip by Matthews is a line of grip and mounting products that have been developed especially for the motion picture, television and photographic production industries. This broad range of products features the Matthews micro-griphead with a super-small1.25" (32mm) diameter and tapped 3/8" rods of various lengths. MICROgrip is great in...
Our Price: $8.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 369764 Hollywood Combo - Double Riser - Aluminum
Item# MSE-369764
A Stand with an attitude! Wider footprint and longer legs provide increased stability. Complete with Rocky Mountain Leg and steel construction. Specifications: Maximum Height 136" (3454mm) Minimum Height 49.5" (1257mm) Weight Capacity 90lbs (40kg) Weight 13lbs (6kg) Footprint 43" (1092mm) Folded Base 5" (127mm)
Our Price: $535.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 377591 Mombo Combo Stand
Item# MSE-377591
The Mombo Combo Stand achieves an incredible height of 22.3 feet. Because of this height, it features an extra-wide base and incorporates a collar for attaching stabilizing Guy Wires or ropes. The Mombo Combo legs are made of 1-1/4" square steel tubing and are internally reinforced with a Matthews engineered gusset assembly. The Mombo Combo's Rocky Mountain Leg will offset uneven terrain to ensure a firm, stable and sturdy footprint. This is absolutely the strongest stand of its type in the...
Our Price: $666.00
Availability: Ships Factory Direct, Typically in 3-10 Business Days
Add to Wish List
Matthews 387030 Hollywood Beefy Baby - Double Riser with Rocky Mountain Leg
Item# MSE-387030
The Matthews 387030 Hollywood Beefy Baby leg supports now fold down. Legs are made of steel instead of aluminum to provide greater stability and longer wear. The top riser which is the smallest in diameter is also made of steel, increasing its strength and permitting the 5/8" Baby Pin to be welded directly to the riser instead of being pinned. Features: Specifications: Max Height: 104" (2642mm) Min Height: 41" (1041mm) Capacity: 22lbs (10kg) Weight: 12.5lbs (5.7kg) Footprint: 33.5"...
Our Price: $278.00
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
Matthews 387031 Hollywood Beefy Baby Triple Riser with Rocky Mountain Leg
Item# MSE-387031
The Hollywood Beefy Baby leg supports now fold down. Legs are made of steel instead of aluminum to provide greater stability and longer wear. The top riser which is the smallest in diameter is also made of steel increasing its strength and permitting the 5/8" Baby Pin to be welded directly to the riser instead of being pinned. Specifications: Maximum Height: 148" (3759mm) Minimum Height: 45.5" (1156mm) Weight Capacity: 20lbs (9.1kg) Weight: 13.5bs (6.1kg) Footprint:...
Our Price: $340.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 387032 Digital Baby Triple Riser Sky-Hi Light Stand
Item# MSE-387032
Matthews 387032 high quality lighting stand is designed for the demanding professional. The innovative, robust and durable Matthews Digital Lighting Stands are becoming an integral component of location and studio lighting packages. Additionally, each riser section is spring dampened, ensuring the stand may be safely lowered. Designed to be stronger and lighter than other manufacturers' aluminum combo stands, Matthews Digital stands are also lower in cost. Features: Spring dampened risers...

Our Price: $263.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 387485 Kit Stand - Medium Duty - Max Steel Light Stand
Item# MSE-387485
Designed primarily for use in lighting kits, this 9.5' Matthews Maxi Kit Steel Stand is compact and light weight. Many MSE kit stands employ a brake shoe system for locking off the riser tubes as opposed to pinch castings, thus permitting the use of heavier fixtures. Specifications: Load Capacity: 25 lb / 11 kg Mounting Options: 5/8" Stud Maximum Working Height: 9.4' / 2.3 m Minimum Working Height: 3' / 0.9 m Collapsed...
Our Price: $154.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 388201 Low Rolling JR. Receiver Runway Base for Magic Stand
Item# MSE-388201
This Matthews 388201 is a really low, rolling stand base that was designed to work with the Magic Stand, but it is also capable of handling any large light fixture mounted directly into its Posi-V-Lock Junior Receiver. Matthews casters are locking and non-marking. Made from steel components not plastic to provide years of durable service. Features: Straight tracking Multi-direction locking Non-marking Tente casters Best braking casters available V-shaped Posi-V-Lock junior receiver ...
Our Price: $467.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 395012 Hot Buttons for Straight and 20 dia. Curved Track (4)
Item# MSE-395012
Hot Buttons work beautifully with Matthews Doorway Dolly (click to view the Doorway Dolly) or the even more versatile Round-d-Round Doorway Dolly (Click to view the Round-d-Round). For straight or curve track, steel, aluminum, or PVC pipe, simply remove the locking nut, self-contained wheel and tire from each axle and replace with Hot Button set and nut. Hot Buttons also make a perfect scooter dolly with just two axles and any size ordinary plywood. Combination Track/Stage Wheels #395001 are as...
Our Price: $1,139.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 395400-15 Dutti Dolly Universal Stand Bracket
Item# MSE-395400-15
Track Brackets for Matthews Dutti Dolly Specifications: Bracket Weight: 3lb Overall Length: 19.25" Center to Center Slot Distance: 16" (specific to the dutti dolly) Adapts to Any Stand: 5/8" & 1-1/8" (baby & junior) stands & flat surfaces (Slider Stands and Low Boy Combos are most common) Track options: 0.75" - 2.25" Round tube or pipe & 0.75" - 2.25" square tube (Outside Diameter) Note: 1.25" Square Tube is recommended by the manufacturer
Our Price: $80.90
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 395412 Dutti Dolly 100mm Bowl Adaptor
Item# MSE-395412
The Matthews Studio Equipment 100mm Bowl Adapter is a precision machined Mitchell mount to 100mm adapter. The adapter requires no tools or hardware.
Our Price: $142.60
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 409708 Overhead Butterfly Snap-a-Part Frame 1-Inch Square Tubing - Radiused Edges - 8x8 Foot
Item# MSE-409708
This Matthews Butterfly/Overhead Snap-A-Part Heavy Duty Frame - 8x8' features the Quick Reverse Ear which will enable the removal and reversal for quick 180° frame repositioning. Features: 1" Square Tubing 4 x Frame Corners Specifications: PN 409708: 8' x 8' (244x244cm) - 20lbs / 9.1kg
Our Price: $1,270.50
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 415173 Baby Ball Head Adapter
Item# MSE-415173
Another creative innovation from the Matthews design team; The Baby Ball Head Adapter. Constructed as one-piece out of 6061 T-6 Aluminum, this strong, sleek-looking adapter converts any 5/8 baby pin or 1-1/8 junior receiver into a 3/8-16 threaded spud. This new adapter will allow the user to mount a ball head to any stand or piece of hardware, be it a mafer clamp, pipe clamp, Matthellini, baby stand, junior stand or one of many other pieces of hardware. Use this adapter with one of the MSE...
Our Price: $46.70
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 417013 - The CAM Tank - Low & Dutch Shots with Fluid Pan & Tilt Capacity
Item# MSE-417013
Matthews CAM Tank is designed to accept all large format camera plates or direct mount to any large or medium format camera equipped with 3/8"-16 mounting holes. The CAM Tank was designed for extremely low shots, without taking away your ability to pan and tilt the camera. lt is also used to achieve dutch angles when mounted to a fluid head, or shots designed to be pointed straight down off of a fluid head on a tripod or jib. The bottom of the plate has 17 strategically placed 3/8"-16 tapped holes...
Our Price: $1,715.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthelini Clamp -3 inch Center Jaw Clamp
Item# MSE-420101
Provides strong solid gripping of round square or rectangular tubing and many other common and irregular shapes. Essentially the same design as the Cardellini. The differences are: A new ergonomic handle design reinforced jaws and the shaft is 1010 chrome plated steel. Available with 2" or 3" Center Jaw or 2" End Jaw. The Center Jaw has a fixed jaw mounted at the base of the Baby Pin portion of the shaft providing strong support for the pin. The End Jaw has the fixed jaw mounted at the end of the...
Our Price: $57.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 420110 Matthellini Clamp - 2-Inch End Jaw
Item# MSE-420110
2 Sizes Available
The Matthews 420110 provides strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. It features an ergonomic handle design and reinforced jaws, and the shaft is 1010 chrome plated steel. It's available with 2" or 3" Center Jaw and 2" or 6" End Jaw. The Center Jaw has a fixed jaw mounted at the base of the Baby Pin portion of the shaft providing strong support for the pin. The End Jaw has the fixed jaw mounted at the end of the...
Read More
Our Price: $73.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 420112-S15 Mini Matthellini
Item# MSE-420112-S15
Mini Matthellini used in the MINIGRIP kit - a whole new family of smaller mounting devices used for clamping and holding a wide variety of production tools and accessories. When used with Matthews' new ROADRAGS kit, the MINIGRIP system eliminates the need for extra stands...the MINIGRIP kit consists of four lightweight 2" MiniGrip Heads with 3/8" and 5/8" mounting holes...two new Mini-Matthellini Clamps...which are half as large as the regular Matthellini but with just as many uses and two 20"...
Our Price: $55.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 420114 MQ Mount for LED and Fluorescent T-12 Light Tubes
Item# MSE-420114
The 420114 MQ Mount is designed to clamp T-12 light tube fixtures with minimal light loss, without the possibility of crushing the tube. The mount terminates to an industry standard 3/8" pin which can be used with any industry grip head. The 3/8" pin is knurled to prevent unwanted rotation and is internally tapped 1/4"-20 to expand its length and rigging capabilities. Features: Anti-crush jaws designed to clamp T-12 LED & flouresent light tubes with minimal light loss. Knurled...
Our Price: $70.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 425159 Right Angle Grid Clamp
Item# MSE-425159
When you have to keep either a heavy or off-center light or monitor from rotating on the pin, the Right Angle Grid Clamp ensures a safe, positive-lock in any application. Right Angle Grid Clamp 90 degree, exceeds tensile strength at17,000 lbs
Our Price: $39.80
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 429029 Stand/SPUD Adapter 1-1/8 to 5/8 Inches
Item# MSE-429029
PN 429029: Machined from solid steel, the Stand/SPUD Adapter is exceptionally strong. Used to convert Junior 1-1/2" female to Baby 5/8" male.
Our Price: $34.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 429051 Junior Double Riser Column for Runway Base
Item# MSE-429051
Matthews 429051 was designed for larger lighting fixtures. These stands are built with steel legs and steel riser assemblies. These stands provide a stable rolling base for Junior and midsize lighting fixtures. Equipped with universal Posi-V-Lock Junior Receiver with po up 5/8" male pin, the Senior Stands are made for fixtures weighing up to 88 pounds. Please refer to the technical specification for the weight limitations of each stand. Matthews casters are locking and non-marking. Made from...
Our Price: $275.80
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 429499 Extendable Baby Stand Extension - 16 Inch to 50 Inch extension
Item# MSE-429499
When a Baby Lighting fixture needs to be just a little higher the stand extension can be added to the top of the stand nail on plate or other hardware
Our Price: $55.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 429603 Equipment 12 Inch C-Clamp to Baby Spud with 2-5/8 Inch Pins
Item# MSE-429603
Matthews C Clamps 12" with 2-5/8" mounting pins. Each clamp has a steel channel welded to both sides of the opening for better and safer locking. Clamps made for mounting Baby fixtures have two separate pins at different angles so that the light fixtures may fit with minimal clearance. Matthews C Clamps are manufactured from premium drop forged steel. It should be noted however, that since the Matthews clamp is an adaptation of a standard C Clamp, there is no effective warranty on the part.
Our Price: $151.30
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 429626-11 Infinity Arm Mafer Cheese Plate Tip
Item# MSE-429626-11
The Infinity Mafer Cheese Plate Tip mounts to all standard cheese plates and camera hole patterns with 1" center to center holes, accommodating both 3/8" and 1/4." This semi-permanently mounts to mafer clamps, super clamps and other similar clamps, and is center tapped for 1/4-20" applications. The kit includes (1) tip, (2) 3/8" bolts and nuts, (2) 1/4-20" bolts and nuts, and (2) 10-32" screws. The Ice shot includes the Kit, Cheese Plate Adapter, Super Mafer Clamp and a GoPro...
Our Price: $67.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 429626-7 Infinity Arm Mini Matthellini Clamp
Item# MSE-429626-7
The Matthews Mini Matthellini Clamp opens up to 2" and will grab onto both round and flat surfaces, making it a versatile and multi-purpose mount. This is great for rigging the Infinity Arm, grabbing props and accessories. The Waterfall shot includes the Mini Matthellini Clamp and the Really Right Stuff Camera Mount. While traveling on foot to exotic places it can be difficult to carry a lot of gear. Strip down to tripod, camera(s), lense(s) and Infinity arm and accessories;...
Our Price: $67.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 429627 Infinity Arm Kit
Item# MSE-429627
The 429627 Infinity Arm is a versatile cine arm used to mount cameras, lights, monitors and anything else you require. The Infinity Arm is a fully articulated arm equipped with 360degrees rotate-able and interchangeable, ball-in-socket, quick release tips for adding and removing accessories quickly and efficiently. The Infinity Arm is the strongest articulating cine arm on the market, with a weight capacity of 15-32lbs depending on the configuration. The Infinity Arm is manufactured...
Our Price: $369.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 429679 Telescoping Hanger 5/8 Inch Male Pin Adapter
Item# MSE-429679
Heavy Duty Telescoping Hangers with Stirrup and Pin. Telescoping Hanger 5/8" Male
Our Price: $21.60
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 429704 Infinity Arm Monitor Mount
Item# MSE-429704
The 429704 is an Infinity Arm tip for the Matthews Monitor Mount. This mount is for use with Infinity Arm. The infinity arm is a versatile cine arm used to mount cameras, lights, monitors and anything else you require. Features: Specifications:
Our Price: $135.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 429733 Drop Ceiling Scissors Clamp with 1/2 Inch Pin
Item# MSE-429733
Drop Ceiling Scissors Clamp with 1/2" Pin.
Our Price: $26.72
Availability: In Stock
Add to Wish List
Matthews 515003 Elemac Mounting Plate
Item# MSE-515003
The Elemac Mounting plate is used to mount your Bazooka.
Our Price: $242.30
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 540004 Super Mafer Clamp
Item# MSE-540004
Strengthened to withstand greater clamping pressure than any other clamp of its kind it can now be effective in even more uses. The protective pads in the jaws have been reformulated for better gripping action. Because of its superior strength several new attachments have been added.
Our Price: $38.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 541004 Super Mafer Clamp and Pin
Item# MSE-541004
2 Colors Available
The Matthews 541004 Super Mafer Clamp is strengthened to withstand greater clamping pressure than any other clamp of its kind and is now even more diversely effective. The protective pads in the jaws have been reformulated for better gripping action.
Read More
Our Price: $49.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 549100 Square Tubing/Gel Frame 48 x 48 Foot x 3/4 Inch Square
Item# MSE-549100
To keep weight to a minimum and yet get maximum strength, all Matthews Solid Frames are made of 3/8" thin wall tubing.. The flat edges of these frames make them ideal for quick gel changes with 2 sided tape. Comes in handy when you need to setup diffusion, a bounce, flag a light, or to hold a gel away from hot light(s). 48" x 48" 3/4" Square Tubing Frame, Weight: 3lbs Features: Specifications:
Our Price: $125.60
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
MSE 40 Inch C Stand w/Spring Loaded Base- Black
Item# MSE-564B
2 Colors Available
Century Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial lighting, the stages would revolve to allow for continuous overhead lighting from the sun. Large reflectors would be positioned to bounce back or kick the overhead light up onto the stage and illuminate the set and actors. These reflectors were made in many sizes, but it seems the most...
Read More
Our Price: $292.50
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 20 Inch Chrome Double Rise C Stand with Mini Base
Item# MSE-573
Century Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial lighting, the stages would revolve to allow for continuous overhead lighting from the sun. Large reflectors would be positioned to bounce back or kick the overhead light up onto the stage and illuminate the set and actors. These reflectors were made in many sizes, but it seems the most...
Our Price: $364.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews Gaffer Grip Clamp
Item# MSE-587
Mounts small fixtures to virtually anything. Heavy duty rubber pads protect the surface
Our Price: $53.46
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 622005 Combo Scrim/Flag Kit
Item# MSE-622005
The Matthews 622005 Combo Scrim/Flag Survival Kit - offering various scrims, diffusers and cucoloris in a convenient carrying case. Included Items: (3) 18'x24' Single Scrims (3) 18'x24' Double Scrims (2) 18'x24' Artificial Silk Diffusers (1) 18'x24' Cello Cucoloris (6) 18'x24' Flags (3) 24'x36' Single Scrim Black (3) 24'x36' Double Scrim Black (2) 24'x36' Artificial Silk Diffuser (1) 24'x36' Wood Cucoloris (6) 24'x36' Flags (1) Carrying Case
Our Price: $4,062.00
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
Matthews 681012 20 Inch Hollywood Gobo Arm
Item# MSE-681012
Matthews 681012 Hollywood Arms are made of Stainless Steel and can come in black finish as well. T-Handles are ergonomically designed to allow for fast, efficient, safe tightening with little effort. Comes with their Hollywood Grip Head attached to one end, the strongest Grip Head in the business, and an additional Grip Head for positioning
Our Price: $60.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 40 Inch Hollywood Arm- Chrome
Item# MSE-684
The head on these arms now feature two holes 3/8" and 5/8" eliminating confusion. New castings offer positive lock in all directions. The strongest and most popular Grip Head in the industry. Guaranteed to hold. Set it and forget it! Will not slip like other manufacturer's products.
Our Price: $61.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 40 Inch Hollywood Head and Arm- Chrome
Item# MSE-685
2 Colors Available
The head on these arms now feature two holes 3/8" and 5/8" eliminating confusion. New castings offer positive lock in all directions. The strongest and most popular Grip Head in the industry. Guaranteed to hold. Set it and forget it! Will not slip like other manufacturer's products.
Read More
Our Price: $96.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List
Matthews 20in C Stand with Sliding Leg Grip Head and Arm
Item# MSE-756020
Century Stands or "C" stands are an important component in the image maker's arsenal of tools. The term "Century Stand" goes back to the early days of motion picture production. Before the introduction of artificial lighting, the stages would revolve to allow for continuous overhead lighting from the sun. Large reflectors would be positioned to bounce back or kick the overhead light up onto the stage and illuminate the set and actors. These reflectors were made in many sizes, but it seems the most...
Our Price: $227.00
Availability: Typically Ships in 3-10 Business Days
Add to Wish List

Since 1970, Matthews has been the premier manufacturer of high quality, specialized hardware for the film, television, still photographic and theatrical industries.

Their commitment to the industry continues with imaginative new products, increased focus on customer service and attention to the precise needs of the grip industry. As they venture into the years ahead their pledge is to provide the finest product, service and competitive pricing available in the industry.

From stands, hardware, booms, truss and lighting, bags, boxes, camera support, dollies and tracks, to textiles and more, Mathews Studio Equipment provides the finest products. Markertek is your source for Mathews Studio Equipment.

Markertek is an authorized dealer for the entire Matthews Studio Equipment line. If you don't see what you're looking for, contact us and we'll do our best to get it for you.

Sign In

Matthews Studio Equipment

Narrow Products

By Category

By Price Range

Filter By