-
Item# MLB-884-LC1
Milbank 884-LC1 8x8x4 LC1 Type 1 Hinged Cover Panel Enclosure Features: Construction
Enclosure and cover manufactured from 16 gauge steel
The door is attached to the enclosure with a continuous hinge
The door is secured closed by a quarter-turn, screwdriver operated flush catch
Panel mounting studs are provided for optional back panel
Provisions for mounting optional cylinder lock
Mounting holes are provided on the back of enclosure
Finish
ANSI 61...

-
Item# MLB-884-SC1
Construction
Enclosure and cover are manufactured from 16, 14, or 12 gauge G90 steel
Available with or without knockouts. For no knockouts, refer to suffix -NK in catalog number
Covers have teardrop slots for easy installation and are attached to body with plated screws
Grounding emboss provided with green plated grounding screw
Holes are incorporated into the back of enclosure for mounting
Finish
ANSI 61 gray polyester powder...

-
Item# MLB-12124-SC1
Milbank 12124-SC1 12x12x4 Type 1 Screw Cover Junction Box / Pull Box Features: Designed for use as a junction box or pull box
For indoor use to provide protection against contact with enclosed equipment where moisture and dust are not a problem.
Construction
Enclosure and cover are manufactured from 16, 14, or 12 gauge G90 steel
Available with or without knockouts. For no knockouts, refer to suffix -NK in catalog number
Covers have teardrop slots for easy installation and...

-
Item# MLB-1010-TFLC
Milbank 1010-TFLC is a 10" x10" Flush Mount Cover for SC1 Series Surface Mount Boxes.
Construction:
Covers are manufactured from 16, 14, and 12 G90 gauge steel.
The continuous hinge is made of stainless steel with a stainless steel hinge pin.
Tumbler lock features slam-latching action on single door (24 wide or less.) Key is removable in unlocked position. Case is zinc-plated steel; lift lever is steel with a dull chrome finish.
Double door (30 and wider) uses overlapping...

-
Item# MLB-10104-HC3R
Milbank 10104-HC3R is a 10" x 10" x 4" Type 1 Hinged Cover Junction Box.
Aplication
Designed for use as a telephone cabinet, panel enclosure, or junction box.
For outdoor use to provide protection against rain, sleet, or snow, or indoors where dripping water is a problem.
Construction
Enclosure and cover are manufactured from 16, 14, 12, or 11 gauge G90 galvanized steel.
The cover is mounted on galvanized lift-off hinges with stainless steel hinge...

-
Item# MLB-10104-LC1
Milbank 10104-LC1 is a 10" x10" x 4" LC1 Type 1 Hinged Cover Panel Enclosure.
Construction:
Enclosure and cover manufactured from 16 gauge steel
The door is attached to the enclosure with a continuous hinge
The door is secured closed by a quarter-turn, screwdriveroperated flush catch
Panel mounting studs are provided for optional back panel
Provisions for mounting optional cylinder lock
Mounting holes are provided on the back of enclosure
Finish:
...

-
Item# MLB-10104-SC1
Milbank 10104-SC1 is a 10" x 10" x 4" Type 1 Screw Cover Junction Box / Pull Box.
Construction
Enclosure and cover are manufactured from 16, 14, or 12 gauge G90 steel
Available with or without knockouts. For no knockouts, refer to suffix -NK in catalog number
Covers have teardrop slots for easy installation and are attached to body with plated screws
Grounding emboss provided with green plated grounding screw
Holes are incorporated into the back of enclosure for...

-
Item# MLB-10106-LC1
Milbank 10106-LC1 is a 10" x 10" x 6" LC1 Type 1 Hinged Cover Panel Enclosure.
Features: Application
Designed for use in control and instrumentation applications
For indoor use in applications where moisture and dust are not a problem.
Construction
Enclosure and cover manufactured from 16 gauge steel
The door is attached to the enclosure with a continuous hinge
The door is secured closed by a quarter-turn, screwdriver operated flush catch
Panel...

-
Item# MLB-10106-SC1
Milbank 10106-SC1 is a 10" x 10" x 6" Type 1 Screw Cover Junction & Pull Box.
Construction
Enclosure and cover are manufactured from 16, 14, or 12 gauge G90 steel
Available with or without knockouts. For no knockouts, refer to suffix -NK in catalog number
Covers have teardrop slots for easy installation and are attached to body with plated screws
Grounding emboss provided with green plated grounding screw
Holes are incorporated into the back of enclosure for...

-
Item# MLB-10124-LC1
Millbank 10124-LC1 is a 10" x12" x 4" Indoor Hinged Cover Panel Enclosure.
Construction:
Enclosure and cover manufactured from 16 gauge steel.
The door is attached to the enclosure with a continuous hinge.
The door is secured closed by a quarter-turn, screw driver operated flush catch.
Panel mounting studs are provided for optional back panel.
Provisions for mounting optional cylinder lock.
Mounting holes are provided on the back of enclosure.
Finish:
ANSI...

-
Item# MLB-10126-TC3R
Milbank 10126-TC3R is a 10" x 12" x 6" Outdoor Weather Resistant Hinged Cover Junction Box.
Features: Applications
Designed for use as a telephone cabinet, panel enclosure, or junction box.
For outdoor use to provide protection against rain, sleet, or snow, or indoors where dripping water is a problem.
Construction
Enclosure and cover are manufactured from 16, 14, 12, or 11 gauge G90 galvanized steel.
The cover is mounted on galvanized lift-off hinges...

-
Item# MLB-1212-TFLC
Features: Applications
Designed for use with the SC1 series enclosures for flush mount telephone cabinet applications.
For indoor use to provide protection against contact with enclosed equipment where moisture and dust are not a problem.
Construction
Covers are manufactured from 16, 14, and 12 G90 gauge steel.
The continuous hinge is made of stainless steel with a stainless steel hinge pin.
Tumbler lock features slam-latching action on single door (24 wide...

-
Item# MLB-12124-LC1
Construction
Enclosure and cover manufactured from 16 gauge steel
The door is attached to the enclosure with a continuous hinge
The door is secured closed by a quarter-turn, screwdriver operated flush catch
Panel mounting studs are provided for optional back panel
Provisions for mounting optional cylinder lock
Mounting holes are provided on the back of enclosure
Finish
ANSI 61 gray polyester powder coating over phosphatized
G90 galvanized...

-
Item# MLB-12126-LC1
The Milbank Manufacturing 12126-LC1 is a wall-mount enclosure with a 12 x 6 x 12 hinge cover. NEMA 1 steel with no knockouts, ANSI 61, Gray, and slotted quarter turn latch. Features: Mounting Embosses are Provided on the Back of Each Enclosure
Sealing Provisions on the Front Cover
The Cover is Designed to Fit under the Drip Shield Top, Held in Place with a Plated Steel Screw Specifications: Material: Steel with Powder Coat Finish
NEMA Rating: Type 1
Color: Gray
Mounting: Wall Mount
Standard:...

-
Item# MLB-12126-TC3R
Features: Aplication
Designed for use as a telephone cabinet, panel enclosure, or junction box.
For outdoor use to provide protection against rain, sleet, or snow, or indoors where dripping water is a problem.
Construction
Enclosure and cover are manufactured from 16, 14, 12, or 11 gauge G90 galvanized steel.
The cover is mounted on galvanized lift-off hinges with stainless steel hinge pins. Cover is fastened with a padlockable draw latch.
Panel mounting...

-
Item# MLB-12128-TC3R
Tc3r-hinged cover telephone cabinet/panel enclosure-type 3r
Features: Industry Standards
NEMA -Type 3R
UL 50-Type 3R
CUL-Type 3R (Equivalent to CSA)
Application
Designed for use as a telephone cabinet,
panel enclosure, or junction box.
For outdoor use to provide protection
against rain, sleet, or snow, or indoors
where dripping water is a problem.
Construction
Enclosure and cover are manufactured
from 16, 14, 12, or 11 gauge G90
galvanized steel.
The cover is mounted on galvanized
lift-off...

-
Item# MLB-1212XSC1
The Milbank MLB-1212XSC1 are replacement covers for the Milbank series of screw cover junction boxes. Milbanks enclosures and covers are manufactured from 16, 14, or 12 gauge steel. This series of enclosures and covers were made for indoor use to provide protection against contact with enclosed equipment where moisture and dust are not a problem. Milibank designed this series of enclosures for use as a junction box or pull box. Features: Specifications: Brand Name: Milbank
Type: Indoor Replacement...

-
Item# MLB-1218-TFLC
Designed for use with Milbank SC1 series enclosures for flush mount telephone cabinet applications. For indoor use to provide protection against contact with enclosed equipment where moisture and dust are not a problem.
Specifications: Covers are manufactured from 16, 14, and 12 G90 gauge steel.
The continuous hinge is made of stainless steel with a stainless steel hinge pin.
Tumbler lock features slam-latching action on single door (24 wide or less.) Key is removable in unlocked position. Case...

-
Item# MLB-12184-SC1
Milbank 12184-SC1 12x18x4 Type 1 Screw Cover Junction Box / Pull Box Features: Construction
Enclosure and cover are manufactured from 16, 14, or 12 gauge G90 steel
Available with or without knockouts. For no knockouts, refer to suffix -NK in catalog number
Covers have teardrop slots for easy installation and are attached to body with plated screws
Grounding emboss provided with green plated grounding screw
Holes are incorporated into the back of enclosure...

-
Item# MLB-16166-TC3R
Features: Designed for use as a telephone cabinet, panel enclosure, or junction box.
For outdoor use to provide protection against rain, sleet, or snow, or indoors where dripping water is a problem.
Construction
Enclosure and cover are manufactured from 16, 14, 12, or 11 gauge G90 galvanized steel.
The cover is mounted on galvanized lift-off hinges with stainless steel hinge pins. Cover is fastened with a padlockable draw latch.
Panel mounting studs provided for optional...

-
Item# MLB-18244-SC1
Features: Construction
Enclosure and cover are manufactured from 16, 14, or12 gauge G90 steel.
Available with or without knockouts. For no knockouts,refer to suffix -NK in catalog number.
Available with or without paint.For no paint, refer to suffix -NP in catalog number. Note: Unpainted enclosures are made from galvanized steel.
Covers have teardrop slots for easy installation and are attached to body with plated screws.
Grounding emboss provided with green plated grounding...

-
Item# MLB-664-LC1
Milbank 664-LC1 6x6x4 LC1 Type 1 Hinged Cover Panel Enclosure Features: Construction
Enclosure and cover manufactured from 16 gauge steel
The door is attached to the enclosure with a continuous hinge
The door is secured closed by a quarter-turn, screwdriver operated flush catch
Panel mounting studs are provided for optional back panel
Provisions for mounting optional cylinder lock
Mounting holes are provided on the back of enclosure
Finish
ANSI 61...

-
Item# MLB-664-TC3R
Weather Proof, 16 gauge, polyester powder coated, galvanized, indoor/outdoor, 6X6X4 Inch steel box,

-
Item# MLB-886-TC3R
Aplication
Designed for use as a telephone cabinet, panel enclosure, or junction box.
For outdoor use to provide protection against rain, sleet, or snow, or indoors where dripping water is a problem.
Construction
Enclosure and cover are manufactured from 16, 14, 12, or 11 gauge G90 galvanized steel.
The cover is mounted on galvanized lift-off hinges with stainless steel hinge pins. Cover is fastened with a pad-lockable draw latch.
Panel mounting studs...

-
Item# MLB-A-LKSFMKEYL
Milbank A-LKSFMKEYL Lock & Keylock Lockset SM FL Mount for LC1 Enclosures
