-
Item# GRL-701K-G
The Tempo 701K-G is a Professional Tone and Probe Tracing kit that includes the Paladin 77HP-G High Power Tone generator and the 200EP Tone Probe Amplifier in a rugged woven nylon carry case. Trace wire paths and identify cables in all common wiring systems. Diagnose common problems in telephone, data, and security wiring. Check for open or shorted wire pairs and confirm the presence of telephone service. Simple operation with audible and visual tone signal indication; provides two distinct...

-
Item# GRL-701K-G-6A
The Tempo 701K-G Kits include the 77HP-G High Power Tone Generator and the 200EP Tone Probe Amplifier in a rugged, woven nylon carrying case (700C).

-
Item# GRL-03579
The 03579 is a 1.25mm Adapter for LC and MU connectors. Features: Specifications: Connector interface : 2.5mm to 1.25mm
Dimensions : 1.5 long (37mm)
Model : 1.25mm Adapter
Weight : 1oz

-
Item# GRL-1137-5002
The Tempo 1137-5002 Sidekick combines the functions of the Sidekick 7B, plus the features of Transmission and Noise testing. The result is an even more versatile test set that identifies frequently missed faults as well as tests and qualifies the transmission quality of POTS lines. Has five transmission and noisetest and determines the stressed noise susceptibility of dry and working pairs. Features: Five transmission and noisetests
Determines the stressed noise susceptibility of...

-
Item# GRL-180XL
Handheld visual fault locator is used to visually locate macrobends, poor splices, bad connectors, breaks in a fiber and tight fiber bends in single mode and multimode fiber optic cables. The 180XL can also be used to confirm fiber continuity. A 2Hz modulation can be used in aiding the confirmation of continuity. Features: The 180XL can be used to confirm fiber continuity on fibers up to 7km in length.
A 1.25mm adapter is available.
Has up to 80 hours of operation.
Ruggedized design - not made...

-
Item# GRL-77HP-G
The Paladin 77HP-G Tone Generator is intended to identify the conductor within a bundle, at a crossconnect point, or at the remote end. This tester is housed in high impact plastic cases, and is powered by one 9 volt battery. Standard test leads include red and black rubber insulated test clips and a snag-proof, four-conductor modular cord and plug. (77HP-G/6A offers angled bed-of-nails clips.) A three-position toggle switch controls the modes of operation, and bi-colored Light Emitting Diodes...

-
Item# GRL-NC-500
Paladin has been going strong for more than 145 years and continues to be the preferred brand of tools and equipment for the electrical contractor. Their focus, as always, has been to deliver customer-focused innovation in the form of high-quality tools that contractors rely on daily. The Paladin NC-500 NETcat Pro NC-500 Structured Wiring Troubleshooter has a touch screen display with contrast adjustment and a backlight. It includes the tests shielded twisted pair, unshielded twisted pair and the...

-
Item# GRL-PA901066
The Paladin PA901066 cable test kit is perfect for detecting good connections, open connections, crossed wires and split pairs. Simple PASS/FAIL test results in one second allows technicians to quickly move on to the next test site. Features: Generates oscillating audio tone for use with tone probes to locate cables
Tests data and telephone cables up to 320 feet (100 meters) for proper pairing for EIA/TIA-568A, EIA/TIA-568B, Token Ring, 10 Base T, and common Category 5 configurations
Tests...

-
Item# PAL-1594
The Paladin 1594 is a microprocessor controlled active cable tester for LAN (RJ45) and coax (F connector) cables. It allows you to check for continuity and correct wiring in seconds. Check patch cords or building wiring for shorts, opens, crosses and splits. The transmitter and receiver lock together for easy storage and have a pouch to keep the kit together. Features: Tests RJ45 patch cords and network installations to identify good connections, opens, shorts or cross-connections
Connection...

-
Item# PAL-70025
Quickly & easily test your computer patch cords or installed cable runs to verify good connections or to troubleshoot problems. Features: Identifies:
Good connections
Opens and shorts
Cross-connections
LED clearly lights for each pin and maps the cable run as the unit goes through the test cycle
Cable test begins automatically once the cable is plugged in and the tester's power button is on
Choice of fast or slow display speeds
Verifies proper cable configuration and good connections
Troubleshoots...
