Narrow Results:

• 

  Radial OX8-r Mic Splitter - Passive w/ 8-input to 8-direct out & 8-isolated out - Radial Transformers

  The Radial OX8 is a high-performance 8-channel 3-way mic splitter that is equipped with an input and three outputs: a direct feed for 48V phantom return, an auxiliary feed with ground lift switch and a transformer isolated output. Although primarily designed for mic signals, the OX8 is equipped with a -36dB pad for line level sources, making the OX8 highly adaptable for all types of signal splitting. The OX8 is particularly well suited to accommodate live recording by delivering a transformer...

  

  Read More

  Item #: RAD-OX8-R

  Availability: Usually ships in 3-10 business days

  Our Price: $849.99

  Add to Wishlist
• 

  Radial OX8-j Mic Splitter - Passive w/ 8-input to 8-direct out & 8-isolated out - Jensen Transformers

  The Radial OX8 is a high-performance 8-channel 3-way mic splitter that is equipped with an input and three outputs: a direct feed for 48V phantom return, an auxiliary feed with ground lift switch and a transformer isolated output. Although primarily designed for mic signals, the OX8 is equipped with a -36dB pad for line level sources, making the OX8 highly adaptable for all types of signal splitting. The OX8 is particularly well suited to accommodate live recording by delivering a transformer...

  

  Read More

  Item #: RAD-OX8-J

  Availability: Usually ships in 3-10 business days

  Our Price: $1,149.99

  Add to Wishlist
• 

  Radial BT-Pro BlueTooth Wireless Receiver with Balanced Stereo DI Outputs

  The BT-Pro is a Bluetooth direct box designed to capture the wireless transmission from a Bluetooth enabled device and convert the signal to a balanced line for use in a PA or recording system. It employs an innovative T-shaped access cavity behind which is located the antenna. This is protected by a milled insert made from Sintra - a rugged closed-cell PVC - that permits the wireless transmission signal to pass without interference, allowing reception distances to 20 meters (60') under ideal conditions. The...

  

  Read More

  Item #: RAD-BT-PRO

  Availability: In Stock

  Our Price: $229.99

  Add to Wishlist
• 

  Radial JDI Passive Direct Box with Jensen Transformer

  The Radial JDI is a passive direct box designed to handle extreme signal levels without distortion of any kind. Unlike an active DI that is limited by the buffering amplifier's rail voltage, the JDI employs a Jensen audio transformer as the engine. Jensen transformers are legendary in their ability to gracefully handle transients while delivering a smooth, warm sounding Bessel curve, reminiscent of the finest vintage gear. Ruler flat from 10Hz to 40kHz and with virtually zero phase...

  

  Read More

  Item #: RAD-JDI

  Availability: In Stock

  Our Price: $199.99

  Add to Wishlist
• 

  Radial Engineering JDI Duplex Mk4 Stereo Direct Box

  The Radial JDI Duplex is a full-feature, stereo passive direct box designed to enhance connectivity, reduce noise, and simplify the hectic life of the touring professional, broadcast engineer or AV integrator. It is plug-and-play easy to use while delivering the utmost sonic quality. Like the Radial JDI, the Duplex employs two high-performance Jensen audio transformers with the same pristine audio signal path that has made the JDI the industry standard. It features exceptional signal handling...

  

  Read More

  Item #: RAD-DUPLEXMK4

  Availability: Usually ships in 3-10 business days

  Our Price: $349.99

  Add to Wishlist
• 

  Radial J48 Active 48V Phantom Powered Direct Box w/Digital Switching Supply

  The Radial J48 is a great sounding active direct box that has been optimized to produce maximum headroom while working within the limited current available from standard 48V phantom power. By employing a unique switching power supply, the J48 is capable of peak transients to 9 volts without choking. The result is lower harmonic distortion, half the inter-modulation distortion and significantly improved dynamics over other DIs. Features include a -15dB pad, 180degree polarity reverse, a unique...

  

  Read More

  Item #: RAD-J48

  Availability: In Stock

  Our Price: $199.99

  Add to Wishlist
• 

  Radial Catapult RX4 Cat 5 Analog Snake Receiver with Two Sets of 4 XLR-M Outputs

  Receive module with two sets of 4 XLR-M outputs The Radial Catapult is a modular snake system that drives four analog or AES audio channels over a single shielded Cat 5 cable. The Catapult enables system contractors to take advantage of pre-wired networks to connect one room to another, and allows live sound technicians to take advantage of the low cost of Cat 5 cable for return or cross-stage snakes. The modular Catapult is available in six configurations with a choice of three input and...

  

  Read More

  Item #: RAD-CATAPULTRX4

  Availability: In Stock

  Our Price: $139.99

  Add to Wishlist
• 

  Radial Catapult TX4 Cat 5 Analog Snake Transmitter with 4 XLR-F Inputs and 4 XLR-M Outputs

  Transmit module with 4 XLR-F inputs and 4 XLR-M outputs The Radial Catapult is a modular snake system that drives four analog or AES audio channels over a single shielded Cat 5 cable. The Catapult enables system contractors to take advantage of pre-wired networks to connect one room to another, and allows live sound technicians to take advantage of the low cost of Cat 5 cable for return or cross-stage snakes. The modular Catapult is available in six configurations with a choice of three input...

  

  Read More

  Item #: RAD-CATAPULTTX4

  Availability: In Stock

  Our Price: $139.99

  Add to Wishlist
• 

  Radial Engineering StageBug SB5W Wall-Mounted Stereo Direct Box

  The Radial SB5W is a stereo direct box made to fit in a standard single-gang electrical wall plate. This provides the AV integrator with a simple, yet effective means of connecting an unbalanced analog audio source such as the headphone output from a laptop computer, iPhone, tablet or line level source such as a CD player to a balanced audio system via a permanently mounted interface. The design begins with all-steel construction for maximum durability and a fully shielded back...

  

  Read More

  Item #: RAD-SB-5W

  Availability: In Stock

  Our Price: $109.99

  Add to Wishlist
• 

  Radial - ProRMP Re-Amping Box

  For years, Reamping has been the 'secret weapon' for countless recordings by the biggest names in the business! Few realize that recording engineers not only Reamp guitars, but often Reamp bass, keyboards, drums and even voice as a means to bring creative new tones and sonic signatures to their music. Reamping has many benefits. You start by recording a clean track and concentrate on capturing the best musical performance. Once the magic has been captured, send the clean track back to the amps...

  

  Read More

  Item #: RAD-PRORMP

  Availability: Usually ships in 3-10 business days

  Our Price: $99.99

  Add to Wishlist
• 

  Radial Engineering Backtrack Stereo Backing Track Switcher with 3.5mm & 1/4 Inch Inputs and Isolated DI Outs

  The Backtrack is a compact stereo audio switcher, perfect for bands running redundant backing tracks on stage. Connect both source devices to the Backtrack via ¼" or 3.5mm connectors, and switch between them or mute them altogether using the front panel controls or a JR-2 remote footswitch. A headphone output with level control allows you to check either input at any time, and ¼" monitor outputs feed powered speakers for playback on stage. Dual XLR outputs feed the...

  

  Read More

  Item #: RAD-BACKTRACK

  Availability: Usually ships in 3-10 business days

  Our Price: $349.99

  Add to Wishlist
• 

  Radial Tonebone Bassbone V2 Bass Preamp and DI Box

  Like the original, the second generation Bassbone V2 features the same award-winning audio circuit that has made the Bassbone a top choice for many of the world's most prominent bass players including Marcus Miller, John Patitucci, Rhonda Smith and Victor Wooten. Simply stated, the Bassbone V2 is a bass command center. Connect any two basses and seamlessly toggle between them using a footswitch. Each channel has a separate level control to balance the two instruments and is augmented with a unique...

  

  Read More

  Item #: RAD-BASSBONEV2

  Availability: Usually ships in 3-10 business days

  Our Price: $289.99

  Add to Wishlist
• 

  Radial BigShot ABY True Bypass Switcher

  The Radial BigShot ABY is a compact ABY switcher that enables you to either switch between two amplifiers or combine the signal when you want both amps to play at the same time. Designed for the purist, this true-bypass ABY switcher is completely passive meaning that there are no tone altering buffers in between the guitar and the amplifier. With the BigShot ABY, you get the pure tone from your guitar plugged direct into your amp! To add versatility, the BigShot ABY is also equipped with a separate...

  

  Read More

  Item #: RAD-BSHOTABY

  Availability: Usually ships in 3-10 business days

  Our Price: $99.99

  Add to Wishlist
• 

  Radial BigShot I/O True Bypass Instrument Selector

  The Radial BigShot i/o is an easy to use instrument selector switch that lets you quickly transition between any two instruments and drive the signal to your amp. Because the i/o is 100% true-bypass, it addresses the needs of the most demanding purist. To further enhance connectivity, input-B is equipped with a level control called DIM that lets you reduce the signal from the louder of your two instruments so that both instruments are matched to the same volume level when they reach the amplifier....

  

  Read More

  Item #: RAD-BSHOTIO

  Availability: Usually ships in 3-10 business days

  Our Price: $99.99

  Add to Wishlist
• 

  Radial Catapult RX4L Cat 5 Analog Snake Receiver with 4 Line Level Isolated XLRM Outputs & 1 Set of Pass-through XLRM

  Receive module with 4 line-level (-20 to +15dB) isolated XLR-M outputs and one set of pass-through XLR-Ms The Radial Catapult is a modular snake system that drives four analog or AES audio channels over a single shielded Cat 5 cable. The Catapult enables system contractors to take advantage of pre-wired networks to connect one room to another, and allows live sound technicians to take advantage of the low cost of Cat 5 cable for return or cross-stage snakes. The modular Catapult is available...

  

  Read More

  Item #: RAD-CATAPULTRX4L

  Availability: Usually ships in 3-10 business days

  Our Price: $229.99

  Add to Wishlist
• 

  Radial Catapult RX4M Cat 5 Analog Snake Receiver with 4 Mic Level Isolated XLR-M Outputs & 1 Set of Pass-through XLRM

  Receive module with 4 mic-level (-40 to 0dB) isolated XLR-M outputs and one set of pass-through XLR-Ms The Radial Catapult is a modular snake system that drives four analog or AES audio channels over a single shielded Cat 5 cable. The Catapult enables system contractors to take advantage of pre-wired networks to connect one room to another, and allows live sound technicians to take advantage of the low cost of Cat 5 cable for return or cross-stage snakes. The modular Catapult is available...

  

  Read More

  Item #: RAD-CATAPULTRX4M

  Availability: Usually ships in 3-10 business days

  Our Price: $249.99

  Add to Wishlist
• 

  Radial Catapult TX4L Cat 5 Analog Snake Transmitter with 4 XLR Inputs & 4 Line Level Isolated XLR-M Outputs

  Transmit module with 4 XLR inputs and 4 line level (-20 to +15dB) isolated XLR-M outputs The Radial Catapult is a modular snake system that drives four analog or AES audio channels over a single shielded Cat 5 cable. The Catapult enables system contractors to take advantage of pre-wired networks to connect one room to another, and allows live sound technicians to take advantage of the low cost of Cat 5 cable for return or cross-stage snakes. The modular Catapult is available in six configurations...

  

  Read More

  Item #: RAD-CATAPULTTX4L

  Availability: Usually ships in 3-10 business days

  Our Price: $229.99

  Add to Wishlist
• 

  Radial Catapult TX4M Cat 5 Analog Snake Transmitter with 4 XLR Inputs & 4 Mic Level (-40 to 0dB) Isolated XLR-M Outputs

  Transmit module with 4 XLR inputs and 4 mic level (-40 to 0dB) isolated XLR-M outputs The Radial Catapult is a modular snake system that drives four analog or AES audio channels over a single shielded Cat 5 cable. The Catapult enables system contractors to take advantage of pre-wired networks to connect one room to another, and allows live sound technicians to take advantage of the low cost of Cat 5 cable for return or cross-stage snakes. The modular Catapult is available in six configurations...

  

  Read More

  Item #: RAD-CATAPULTTX4M

  Availability: Usually ships in 3-10 business days

  Our Price: $249.99

  Add to Wishlist
• 

  Radial Cherry Picker Preamp Selector

  The Radial Cherry Picker is a unique tool designed to improve efficiency and workflow in the studio by simplifying the process of matching the best preamp with a microphone for a given track. This is most often done when recording vocals. This improves the sonic character of the track and provides the vocalist with a more comfortable sound, which in turn allows for a better performance. Four front panel 'radio style' selector switches select the active preamp while automatically disconnecting...

  

  Read More

  Item #: RAD-CHERRYPICKER

  Availability: Usually ships in 3-10 business days

  Our Price: $349.99

  Add to Wishlist
• 

  Radial Engineering DiNet Dan-RX Dante Network Receiver with Digital Inputs and Stereo Analog Outputs

  The DiNET DAN-RX is a 24bit/96kHz digital to analog endpoint that allows the user to output audio from a Dante network to stereo systems. The DAN-RX is equipped with left and right balanced XLR outputs with a level control that allows for connection to microphone inputs up to +4dBu line level systems. A local 3.5mm headphone output is provided to test or monitor audio before connection to the PA system.

  

  Read More

  Item #: RAD-DINET-DAN-RX

  Availability: In Stock

  Our Price: $399.99

  Add to Wishlist
• 

  Radial Engineering DiNet Dan-TX Dante Network Transmitter with Stereo DI Inputs and Digital Out

  The DiNET DAN-TX is the worlds first Dante enabled stereo direct box. Equipped with ¼", RCA and stereo 3.5mm input jacks, the DAN-TX allows the user to connect instruments or line level sources directly to networked audio systems using the Dante protocol. The DAN-TX features 24bit/96kHz analog to digital conversion to provide the highest audio quality, and a local 3.5mm headphone output provides the means to quickly test audio.

  

  Read More

  Item #: RAD-DINET-DAN-TX

  Availability: In Stock

  Our Price: $399.99

  Add to Wishlist
• 

  Radial Engineering DiNet DAN-RX2 Dante Network Receiver - Ethercon Input with Stereo XLR Analog Outputs

  Dual Output Dante Endpoint The DAN-RX2 is a 2-channel 24bit/96kHz digital to analog endpoint that allows you to output audio from a Dante or AES67-compliant network for connection to professional audio systems. Robust digital audio distribution The DAN-RX2 is a road-worthy digital receiver capable of delivering two channels of analog audio to any location from a Dante or AES-67 compliant network. Balanced XLR outputs include a ground lift and a separate headphone amp with...

  

  Read More

  Item #: RAD-DINETDANRX2

  Availability: In Stock

  Our Price: $449.99

  Add to Wishlist
• 

  Radial Engineering DiNet DAN-TX2 Dante Network Transmitter - Stereo Line level XLR/TRS Inputs with Level Controls

  Two Channels of Analog Audio over Dante The Radial Engineering DAN-TX2 is a 2-Channel analog-to-digital converter that allows you to connect any line level source to a Dante or AES67-compliant network. Seamless network integration The DiNET DAN-TX2 makes it easy to transmit two channels of high quality analog audio over a Dante or AES67-compliant network. Multiple input options are provided, with Balanced XLR/TRS connectors for professional audio sources, RCA jacks for...

  

  Read More

  Item #: RAD-DINETDANTX2

  Availability: In Stock

  Our Price: $449.99

  Add to Wishlist
• 

  Dragster - Pickup Load Corrector

  The Radial Dragster is a super-compact load correction device that lets you adjust the load on your electric guitar pickup to replicate the sound as if connected directly to a tube guitar amp. When a guitar is connected to a guitar amplifier, the pickup and the amp join together to form a circuit. But as soon as you introduce a buffer in between the pickup and the amplifier, the natural relationship is lost. The pickup only 'sees' the buffer and the tone changes. This is the fundamental reason...

  

  Read More

  Item #: RAD-DRAGSTER

  Availability: Usually ships in 3-10 business days

  Our Price: $49.99

  Add to Wishlist
• 

  Radial EXTC-SA Guitar Effects Interface

  The EXTC-SA from Radial is a stand-alone audio interface that lets you incorporate guitar effects into the realm of pro-audio recording. Just imagine, add a touch of grit to a vocal track, some wah on a kick drum, maybe flange a violin the EXTC is a creative tool made for your esoteric-inventive side, ready to unleash fresh new sounds that will make your recordings stand out from the crowd. And it's super easy to use: connect a line level signal from the recording system. The EXTC-SA...

  

  Read More

  Item #: RAD-EXTC-SA

  Availability: Usually ships in 3-10 business days

  Our Price: $259.99

  Add to Wishlist

Newsletter Sign Up

Weekly email with exclusive deals, unique new products, how-to videos and so much more!

Download the Newest Catalog!

• A Must for all Broadcast & AV Professionals
• Exclusive & Custom Solutions
• The Best New Products
• Latest Industry Trends