-
Item# REM-APPKITPRO
The Adapt-a-Pak Pro Kit is a specially selected group of adapters collected in one case for convenient use in the field.
There are 55 adapters total, of 30 types.
The case is constructed of clear plastic making possible a quick visual confirmation of what you have. This case also incorporates adjustable dividers which eliminates the need to rummage through a pile of adapters in your bag.

-
Item# REM-MCATB
4 Colors AvailableThe Original Miniature Windscreen.
The Micro-Cat Miniature Windscreen allows the use of lavaliere microphones in windy conditions that would otherwise cause serious audio problems. They really work.
Hand-made from a fuzzy outer layer plus two additional inner layers of open weave fabric, the Micro-Cat very effectively stops wind from reaching the microphone to substantially reduce wind noise while remaining sonically transparent. The elastic opening easily fits over most lav microphones with...
Read More
-
Item# REM-ANSMA
Remote Audio "Miracle Whip" ANSMA Flexible Antenna Kit. Always straightens! Miracle Whip antennas are made of memory steel which is flexible but highly resistant to permanent bends.
Recommended for Lectrosonics, Zaxcom, or any other UHF Receiver or Transmitter using SMA connectors operating between 500-900 MHz (Lectro Blocks 21-33). Includes frequency trimming chart and color coding bands.

-
Item# REM-URSPOUCHMEBE
Remote Audio URS POUCHMEBE URSA Pouch allows you to rig a transmitter vertically or horizontally to a belt or bra. They can also be sewn or pinned into costumes. Features: Specifications:

-
Item# REM-CAXJCOL2RTMF
The Remote Audio CAXJCOIL2RTMF is a coiled XLR Jumper Cable featuring a superior shielding, which greatly reduces electromagnetic noise and RF. It offers rugged, well-crafted connectors to ensure durability and longevity. The cable coils down to 8 inches and extends to 30 inches in length. It comes with right-angle connectors at both ends, which makes it easier to use in tight situations. Features: Extends from 8 inches to 30 inches Specifications:

-
Item# CAXJCOIL2
Remote Audio CAXJCOIL2 18 Inch Coiled Jumper XLR Cable

-
Item# REM-URS-THNU
Remote Audio URS THNU URSA Thigh Straps are just 1mm thick. They provide excellent stretch, comfort & breathability with an outer surface that hook Velcro can grip to at any point.
Features: Specifications:

-
Item# REM-PS12V15A
Remote Audio PS12V1.5A is a 12V DC power supply for use with all SPEAKEASYs.
Specifications: 12 Volt, 1.5 Amp low profile power supply
2.1mm coaxial connector
Center Pin + (positive) for use with all SPEAKEASYs
Dimensions: 2.75" x 1.75" x 1.5"

-
Item# REM-BDSCZSTA100
This Remote Audio BDS Power Outlet Cable BDSCZSTA100 features locking straight and right angle connections, and is intended for use with the Zaxcom STA Stereo Adapter.
Features: Locking Connections
Right Angle Plug
Length - 24" (609mm)

-
Item# REM-BDSHQINV2
The Remote Audio BDSHQINV2 is a DC Power Cable for Hi-Q Style Batteries.

-
Item# REM-CAPWRHIRWSD
The Remote Audio CAPWRHIRWSD is a 4' long 4-Pin XLR DC Power Cable from Remote Audio features an XLR4 male connector at one end and a 4-pin Hirose male connector at the other end. This cable is used with the MEON line of power products and other power sources with standard wiring.

-
Item# BDSCLSR
BDS Cable for Lectrosonics SR Receiver and Battery Eliminator for SMA Transmitter; 24 Inch

-
Item# CASDTYLEC
This Remote Audio Sound Devices 302/402 Tape Out to 2 Lectrosonics TX is a proprietary cable with a TA3F connector at one end and 2 TA5F connectors at the other. This cable is designed to connect from a Sound Devices 302/402 tape out to two Lectrosonics TX transmitters.

-
Item# REM-BDSV4U
Remote Audio's BDS system consists of a reverse-polarity protected and overload protected distribution box with illuminated bi-color on/off switch, six standard outlets, a power source (typically a rechargeable battery such as the NP-1), an input cable, and output cables to the devices being powered. BDSv4u also has a USB power outlet and a 6-pin port for remote accessories.
The primary purpose of the BDS system is to enable multiple pieces of equipment to be powered by a single source, and simultaneously...

-
Item# REM-MEONLIFE
The MEON LiFe (internal Lithium-Iron-Phosphate [LiFePO4] battery), is a self-contained power system that provides up to 18 Amps* of 12 Volt DC and 20 Amp-hours of internal Lithium-Iron-Phosphate battery backup to ten standard 4-pin outlets all in a single, silent, 1-rackspace module weighing less than 14 pounds. The chassis is constructed of durable and lightweight powdercoated aluminum, and the removable mounting ears can be adjusted and reversed to allow mounting in a variety of configurations....

-
Item# REM-APPKITLT
The Remote Audio APPKITLT Adapt-a-Pak Lite Kit includes 27 adapters total, of 19 types.
The case is constructed of clear plastic making possible a quick visual confirmation of what you have. This case also includes adjustable dividers includes the following:
(2) Phono (RCA) jack to 1/4 inch TS plug. (APP02)
(2) 3.5mm TS jack to Phono (RCA) plug. (APP04)
(2) 1/4 inch TS jack to Phono (RCA) plug. (APP07)
(2) Phono (RCA) jack to Phono. (RCA) jack (APP11)
(1) 1/4 inch TS plug...

-
Item# REM-HN7506
Sound mixers often find themselves in very high noise environments such as helicopters, raceways, firing ranges, rock concerts, etc., left with ringing ears and wondering what was actually being recorded.
Providing extreme isolation from outside noise and using Sony MDR-7506 drivers with special baffling, the Remote Audio HN-7506 allows accurate, full-range monitoring in loud environments and adds a high degree of protection from hearing damage while giving the user the familiar sound of the...

-
Item# REM-SPKEZV3B
The Speakeasy v3b is a self-contained, battery-powered speaker with mic, line and instrument level inputs for production sound use.
Compact Enclosure
The Speakeasy v3b is housed in a cast aluminum enclosure with a durable black finish. At under 5 pounds, the unit is small enough to hide on set and rugged enough to pack in a case with the rest of your gear.
Flexible Inputs
The back of the unit has two combo jacks for connecting mic, line or instrument level inputs....

-
Item# REM-CABETASD552
ENG breakaway assembly with timecode for Sound Devices 552. Mono return.
10-pin Hirose M and TA3F to (2) XLR3M, 3.5mm TRS return pigtail and BNC RA plug.
20 feet

-
Item# REMCABETATCEXT50
Remote Audio REM CABETATCEXT50 is a 50 foot ENG Timecode Extension Cable for the CABETASD552 ENG breakaway assembly with timecode for Sound Devices 552.

-
Item# REM-CAXJCOILLPF
The 2 to 7' CAXJCOILLPF Remote Audio Low-Profile XLR3F to XLR3M Balanced Coiled Jumper Cable is an audio interconnect cable designed to provide reliable connectivity for audio engineers, field recordists, and boom operators in ENG, EFP, video production, and broadcast. The balanced cabling minimizes noise such as EMI and RFI and the coiled design allows length extension without the bulk of loose cable loops.
The female connector utilizes a low-profile design with side-exit cabling for...

-
Item# REM-CAXSTEX5M
Remote Audio CAXSTEX5M is an 18" 5-pin XLR male to dual 3-pin XLR female stereo cable.
Features: Balanced stereo breakout cable
(2) XLR3F to XLR5M
18" includes 5" fan

-
Item# REM-BDSCT4F
The Remote Audio BDSCT4F cable is used to connect the Remote Audio BDS to any piece of gear that uses a TA4 input for powering, including the Sound Devices 888, Scorpio, and 833 mixers. The 2' cable features a BDS (5.5 x 2.5 x 12mm) RA coaxial plug to connect to the BDS at one end, while the other end sports a TA4F connector for the mixer or similar compatible equipment.
Features: Connect BDS Power to TA4 Mixer
Fits Any Mixer with TA4M Power Input
Specifications: Cable Type:...

-
Item# CASD442LO
Secondary Main Left and Right Outputs on Mini-XLR's. TA3-F to XLR3-M, balanced output cable, 12"

-
Item# REM-BDSIN
The Remote Audio BDSIN is a 4-Pin XLR Male Input Cable.
