-
Item# SKB-3I-2424M103U
Featuring both injection molded cases and racks, SKB's 3I-2424M103U improved waterproof Fly Racks are lighter in weight and more affordable than previous models, all without compromising strength or durability.
SKB's injection molded rack frames are manufactured alongside our iSeries cases in Orange, California. Rack frames are removable and fit easily into SKB's iSeries cases, where they are protected by high quality PE foam that provides space for protruding knobs and buttons.
At...

-
Item# SKB-1SKB-R4U
SKB 1SKB-R4U Standard Roto Rack is roto-molded of Polyethylene (LLDPE) for extra strength and durability. The exterior features SKB's recognizable bar design that signifies the rack unit size on the front and rear lids. Molded bars on top and bottom also provide interlocking capabilities allowing you to easily and securely stack them with SKB's Shallow Racks and Roto Rolling Racks, making transport even more convenient and secure. Lids include rubber gasket seals to keep water out. Other...

-
Item# 3SKB-R906U30
SKB's latest design takes the 24" case design and adds depths of either 28" or 30" deep for products such as deeper computer servers from companies like Dell and Compaq. These new cases have all of the same great features as the 24" deep Roto Shockmount Series. The 30" deep design includes traditional threaded steel rails, while the 28" deep design includes the SKB Adjustable Rail Conversion System
Features: Threaded steel rails
Rear rails
Shock and water resistant
Gasketed doors
Pressure...

Our Price: $1,869.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# SKB-3I-2424M146U
Featuring both injection molded cases and racks, SKB's improved waterproof Fly Racks are lighter in weight and more affordable than previous models, all without compromising strength or durability.
SKB's injection molded rack frames are manufactured alongside our iSeries cases in Orange, California. Rack frames are removable and fit easily into SKB's iSeries cases, where they are protected by high quality PE foam that provides space for protruding knobs and buttons.
At less than half the weight...

-
Item# 3SKB-R12U20W
The Rolling Shockmount Case series incorporates our recessed patent pending TSA trigger latches and low profile injection molded pull handle with a 20 inch deep tough shell. The molded design provides extra stiffness in the lids and sides and allows for secure stacking. Rack depth front to rear rail is 20 inches and each lid is 2-1/4 inches deep. Doors are fully usable even when racks are stacked together. Elastomeric shocks protect even the heaviest of loads. Sliding retractable handle, ambient...
-
Item# 3SKB-R06U20W
2 Rack Sizes AvailableThe Rolling Shockmount Case series incorporates our recessed patent pending TSA trigger latches and low profile injection molded pull handle with a 20 inch deep tough shell. The molded design provides extra stiffness in the lids and sides and allows for secure stacking. Rack depth front to rear rail is 20 inches and each lid is 2-1/4 inches deep. Doors are fully usable even when racks are stacked together. Elastomeric shocks protect even the heaviest of loads. Sliding retractable handle, ambient...
Read More
-
Item# SKB-3RR-14U2022B
SKB's 3RR Series Removable Shock Rack Transport cases are available in 8 sizes: 3U, 4U, 5U, 6U, 7U, 9U, 11U and 14U. These Shock Racks are lightweight, shockproof, watertight, dustproof, heat and chemical resistant, perfect for protecting and transporting your sensitive electronic equipment. Molded of LMDP Linear Medium Density Polyethylene plastic that meets or exceeds MIL-STD 810G standards, these Shock Racks also include 8 elastomeric shock absorbers which allow for a standard payload range of...

Our Price: $2,204.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# SKB-3I-3016-10BE
The SKB 3i-3016-10BE iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, and feature a gasket-sealed, water and dust tight, submersible design (MIL-C-4150J / IP67). Other standard features include a molded-in hinge, patented trigger release latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD-648C), and resistance to UV, solvents, corrosion,...

-
Item# SKB-R4S
The re-designed Roto-molded Shallow Rack Cases meet the needs of musicians and pro audio engineers. The new 1SKB-R4S now has a full front and rear cover instead of a rear access panel for easy access. Both doors have a rubber gasket to keep water out of the case.
The Shallow Racks are roto-molded for strength and durability and feature a new exterior design with interlocking capabilities, recessed steel, Mil-Spec black twist latches, shock absorbing rubber feet and new heavy-duty flush handles....

Our Price: $194.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# SKB-R6S
The re-designed Roto-molded Shallow Rack Cases meet the needs of musicians and pro audio engineers. The new 1SKB-R6S now has a full front and rear cover instead of a rear access panel for easy access. Both doors have a rubber gasket to keep water out of the case.
The Shallow Racks are roto-molded for strength and durability and feature a new exterior design with interlocking capabilities, recessed steel, Mil-Spec black twist latches, shock absorbing rubber feet and new heavy-duty flush handles....

Our Price: $234.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# SKB-R2S
The re-designed Roto-molded Shallow Rack Cases meet the needs of musicians and pro audio/video engineers. The new 1SKB-R2S now has a full front and rear cover instead of a rear access panel for easy access. Both doors have a rubber gasket to keep water out of the case.
The Shallow Racks are roto-molded for strength and durability and feature a new exterior design with interlocking capabilities, recessed steel, Mil-Spec black twist latches, shock absorbing rubber feet and new heavy-duty flush...

-
Item# SKB-3R4222-24BLW
The SKB 3R4222-24B-LW Mil-Standard cases were designed to meet the most demanding military specifications. They are roto-molded for strength and durability, airtight and water proof with solid stainless steel latches and hinges that will withstand the most demanding shipping conditions.
The 3R Mil-Std. Cases are molded of (LLDPE) polyethylene impact resistant / UV stabilized material and meet or exceed MIL-STD 810 and MIL-C-4150J specifications.
The shipping cases are all available...

Our Price: $1,209.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# SKB-3I-221710BM1
The SKB iSeries 3i-221710BM1 was designed to fit the Blackmagic Design ATEM Camera Control Panel, ATEM 1 M/E Advanced Panel, or the DaVinci Resolve Mini Panel, and features a high quality PE foam"terior that has been form cut for a custom fit.
All SKB iSeries"jection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, and feature a water- and dust- tight, submersible design (MIL-C-4150J) that is resistant to corrosion and impact damage...

Our Price: $464.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# 3SKB-R10U20W
The Rolling Shockmount Case series incorporates recessed patent pending TSA trigger latches and low profile injection molded pull handle. The molded design provides extra stiffness in the lids and sides while also allowing the racks to stack securely together. Features: TSA latches
Threaded steel rails
Rear rails
Built-in wheels
Shock and water resistant Interior Width 19.0000 in 48.2600 cm
Interior Height 17.5000 in 44.4500 cm
Rack Space Units Total 10 10
Rack Depth Rail to Rail 20.0000...

Our Price: $1,034.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# SKB-3I-3424-12BC
The 3I-3424-12 Pro Audio Utility Case measures an impressive 34” Long x 24” Wide x 12” Deep, is molded of ultra high-strength polypropylene copolymer resin, and features a gasketed, water and dust tight, submersible design (IP67) that is resistant to corrosion and impact damage, and an automatic ambient pressure equalization valve (MIL-STD-648C) to assist with moisture control.
This iSeries size is another new size that is being produced on SKB’s Energy Saving Hydraulic Toggle Injection Molding...

Our Price: $524.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# SKB-3I-201510PAR
The SKB 3i-201510PAR Chauvet Freedom Par case will accommodate many models and is the perfect solution for a rental house, band or DJ that travels with up lighting. This case fits six Par lights. The interior of this case is designed with rigid dividers to keep the fixtures from rubbing against each other with high quality dense PE foam positioned at the bottom of the case to keep the Par lights at an easy reach height. There are (10) pockets positioned around the outside of the...

Our Price: $324.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# SKB-1SKB-ISF4U
The big brother of the 1SKB-iSF2U! This case features a virtually indestructible, waterproof injection molded shell that is lighter, stronger, and more affordable than the previous 4U Studio Flyer, and includes innovative molded-in front and rear rack rails that provide even more security and durability for sensitive studio equipment during travel. As a larger Studio Flyer option, The 1SKB-iSF4U offers a 4U rack mount measuring 15" from front rail to rear rail which safely accommodates...

-
Item# SKB-1SKB-R6UW
SKB 1SKB-R6UW Roto Rolling Rack are roto-molded of Polyethylene (LLDPE) for extra strength and durability. These racks incorporate their one-touch pull handle and back lid mounted wheels to improve ease of transport and help eliminate heavy lifting and carrying. The exteriors feature SKB's recognizable bar design that signifies the rack unit size on the front and rear lids. Molded bars on top and bottom also provide interlocking capabilities allowing you to easily and securely stack them...

-
Item# SKB-3I-2217M103U
The 3i-2217M103U featuring both injection molded cases and racks, their improved waterproof Fly Racks are lighter in weight and more affordable than previous models-all without compromising strength or durability.
SKB's injection molded rack frames are manufactured alongside our iSeries cases in Orange, California. Rack frames are removable and fit easily into SKB's iSeries cases, where they are protected by high quality PE foam that provides space for protruding knobs and buttons.
At...

-
Item# SKB-3I-2215M82U
Featuring both injection molded cases and racks, SKB's improved waterproof Fly Racks are lighter in weight and more affordable than previous models--all without compromising strength or durability.
SKB's 3i-2215M82U injection molded rack frames are manufactured alongside their iSeries cases in Orange, California. Rack frames are removable and fit easily into SKB's iSeries cases, where they are protected by high quality PE foam that provides space for protruding knobs and buttons.
At...

-
Item# SKB-3I-3613-12DT
SKB has teamed up with Think Tank Photo-the premier photo/video bag and backpack company-to design quality interiors that provide photographers and videographers with the best of both worlds: soft case adaptability with the unparalleled strength and durability people expect from SKB's versatile, airline-tough cases.
The 3i-3613-12DT is watertight and dustproof, and features a deluxe deep closed cell fitted foam liner, (3) heavy duty hinged dividers, (10) padded sub-dividers, and...

Our Price: $414.99
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# SKB-1SKB-R6U
SKB 1SKB-R6U Standard Roto Rack is roto-molded of Polyethylene (LLDPE) for extra strength and durability. The exterior features SKB's recognizable bar design that signifies the rack unit size on the front and rear lids. Molded bars on top and bottom also provide interlocking capabilities allowing you to easily and securely stack them with SKB's Shallow Racks and Roto Rolling Racks, making transport even more convenient and secure. Lids include rubber gasket seals to keep water out. Other...

-
Item# SKB-3I-1914N8ATM
The SKB iSeries 3i-1914N8ATM was designed to fit the Blackmagic Design ATEM Television Studio Pro HD or Pro 4K, and features a high quality PE foam interior that has been form cut for a custom fit.
All SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, and feature a water- and dust- tight, submersible design (MIL-C-4150J) that is resistant to corrosion and impact damage (MIL-STD-810G). Other standard features include...

Our Price: $349.99
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
-
Item# SKB-1SKB-R4UW
SKB 1SKB-R4UW Roto Rolling Racks are roto-molded of Polyethylene (LLDPE) for extra strength and durability. These racks incorporate their one-touch pull handle and back lid mounted wheels to improve ease of transport and help eliminate heavy lifting and carrying. The exteriors feature SKB's recognizable bar design that signifies the rack unit size on the front and rear lids. Molded bars on top and bottom also provide interlocking capabilities allowing you to easily and securely stack them...

-
Item# SKB-1SKB-R8UW
SKB 1SKB-R8UW 8U Roto Rolling Racks are roto-molded of Polyethylene (LLDPE) for extra strength and durability. These racks incorporate their one-touch pull handle and back lid mounted wheels to improve ease of transport and help eliminate heavy lifting and carrying. The exteriors feature SKB's recognizable bar design that signifies the rack unit size on the front and rear lids. Molded bars on top and bottom also provide interlocking capabilities allowing you to easily and securely stack them...
