-
Item# 789-44PS-RP
Connects four emitter ports and power supply to all Xantech infrared receivers and keypads
Four parallel emitter ports with 470-Ohm resistors drive four single or four dual emitters
Quick-connect stereo mini jack for IR
Receivers that use a stereo mini plug
STATUS terminal for connection of IR Receivers and Keypads that have status LED's
2.1 mm coaxial power jack
Includes power supply
Features: Dimensions: 3" x 1 3/4" x 13/16" (77mm x 45mm x 21mm)
Power LED

-
Item# XAN-282D
2 Quantities AvailableThe 282D Designer Emitter contains a tiny infrared LED housed in a miniature, designer styled, black appearing, injection molded plastic shell. It emits IR (infrared) control signals sent to it by IR receivers or other Xantech controllers. The 282D can be installed directly on the IR sensor window of the controlled device or other suitable locations.
Features: Non-visible, high-output version
Deep purple LexanTM shell
Clear adhesive film included on emitter housing for attachment to IR...
Read More
-
Item# XAN-DL95K
The new 95 and 85 series IR kits from Xantech feature five significant advances in IR control to achieve their remarkable sensitivity, performance and reliability in a wide variety of installation environments. Xantech is the only manufacturer building an IR product line around this level of advanced circuit design. IR is a crucial control "backbone" in nearly every A/V system installation, and Xantech is committed to IR that works perfectly every time which demands such a no-compromise approach....

-
Item# XAN-HL85BK
Featuring five significant advances in IR control to achieve their remarkable sensitivity, performance and reliability in a wide variety of installation environments. The Xantech HL85BK LCD/CFL friendly Hidden Link IR Kit includes an HL85 table top infrared receiver, 1x4 connecting block and 4 IR emitters.
Native Carrier Frequency Transmission Circuitry
Nearly every IR system relies on a carrier frequency to "carry" the commands to their destination. Some consumer electronic devices,...

-
Item# XAN-CC12
Xantech CC12 is an IR Remote Controlled Double Pole Double Throw Relay Module. It provides dry contact closures to satisfy a variety of uses, such as activation of screen drops, projector lifts, etc. The switching is accomplished by way of infrared commands originating from a Xantech RC68+ Programmer (or RC68 Programmer). It can also be switched by a DC voltage applied between the CI (control input) and GND terminals. The RC68+ commands are "taught" to learning devices and passed to the IR...

-
Item# XAN-28DES
The Xantech 28DES is a black (IR opaque) 1" x 2" shield that fits over both the Xantech Designer Emitter body and the IR sensor window of a controlled component. An optional accessory, it prevents unwanted external IR signals frompassing through it or leaking past it.
The 28DES also prevents IR from the Designer Emitter from radiating backwards into the IR sensors of other components. It is especially useful for zone controlled applications where you want the equipment controlled only by the...

-
Item# 789-44
Connects four emitter ports and power supply to all Xantech infrared receivers and keypads
Four parallel emitter ports with 470-Ohm resistors drive four single or four dual emitters
Quick-connect stereo mini jack for IR
Receivers that use a stereo mini plug
STATUS terminal for connection of IR Receivers and Keypads that have status LED's
2.1 mm coaxial power jack
Power Supply required! Not included. Model# 789-44PS-RP is the same exact unit that includes a power supply....

-
Item# DL85
These small IR receivers have been designed for mounting in very small spaces. They may be mounted under shelf edges, cabinet ledges, in wall speakers, etc. - anywhere an inconspicuous appearance is desired. The high sensitivity of these receivers allows placement behind speaker grilles and still receive IR commands up to 80 feet away. Depending on remote control output strength and ambient conditions. Features: Wire channel for clean installation.
System testing redtalk- back LED.
Includes...

-
Item# DL85K
The new 95 and 85 series IR kits from Xantech feature five significant advances in IR control to achieve their remarkable sensitivity, performance and reliability in a wide variety of installation environments. Xantech is the only manufacturer building an IR product line around this level of advanced circuit design. IR is a crucial control "backbone" in nearly every A/V system installation, and Xantech is committed to IR that works perfectly every time which demands such a no-compromise approach....

-
Item# ML85K
The Micro Link IR Receiver is a small peep-hole style infrared repeater assembly. The Micro Link IR Receiver is equipped with a 7-foot cable and a 3.5mm stereo mini plug, which is plugged directly into the "IR RCVR" jack on the connecting block, such as the models 789-44, CB60, and 791-44. The Micro Link IR Receiver is primarily intended for use in installations where the connecting block is within reach of its 7-foot cable - as when installing the Micro Link IR Receiver in a cabinet where the controlled...
-
Item# XAN-CPL10
The Xantech CPL10 RF/IR Coupler is used to extract or inject IR control signals when used in conjunction with a TV coaxial RF cable. The CPL10 has two "F" type coaxial jacks and one IR out (or in) 3.5mm mono mini jack.
Features: Used to extract or inject IR control signals when used in conjunction with a TV coaxial RF cable.
Has two "F" type coaxial jacks and one IR out (or in) 3.5mm mono mini jack.
