-
Radio Design Labs
Item# STA1
The STA-1 is a dual-channel line-level preamplifier with bridging inputs, adjustable gain or loss, and low-impedance outputs. Each of the two identical circuits is both an electronic line transformer and a line amplifier. Hook up the STA-1 just like a pair of audio transformers with gain. True dc amplifiers produce unsurpassed audio clarity, high common-mode rejection, ultra-low distortion and low noise. The STA-1 is perfect for most line amplification, impedance or balanced/unbalanced conversion.
The...
-
Radio Design Labs
Item# ST-VCA3
The ST-VCA3 is used in applications requiring smooth audio level control from a remote control panel, potentiometer or dc voltage (0 to 10 V). Installation in series with the audio input of a power amplifier allows remote control of that amplifier's level. For installations where it is preferred to keep the audio localized in the rack, audio controls are extended outside the rack from the ST-VCA3. Many installations benefit from avoiding long-term potentiometer wear from audio running through the...
-
Radio Design Labs
Item# EZ-PH1
The EZ series offers unparalleled flexibility. Each unit is fully labeled on the front and rear for use either as a finished product or as a utility module. Installation of multiple products is quick and easy using the comprehensive range of EZ rack mounts, chassis, bezels, drawers and accessories. High quality full-size switches, long life controls, quality connectors, solid-state audio and video switching, gold plating and superior engineering combine to make EZ the best value in the industry....
-
Jensen Transformers
Item# JT-11-BMCF
The Jensen JT-11-BMCF is a Line Output Audio Transformer with 1:1 Bifilar Windings. This transformer is designed for ultra-high performance line output stages. Specially processed 80% nickel core alloy is used for lowest possible harmonic distortion of high level low frequency signals. For best performance, driving signals should be free of DC and source impedance kept as low as possible.
Line output transformers are useful mainly because they allow any output stage circuit topology,...
Our Price: $94.95
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Radio Design Labs
Item# STA-2A
The STA‑2A is a dual‑channel, line‑level audio preamplifier. Each channel is identical. The audio inputs are bridged at 20 kΩ and accept either an unbalanced or a balanced audio signal. Gain is adjustable from unity to +24 dB using a 25‑turn precision audio taper trimming potentiometer. The output line driver circuits are designed to drive long balanced audio lines into 600 Ω loads.
The STA‑2A features wideband circuitry for excellent phase response, low...
-
Radio Design Labs
Item# STA-1M
The STA-1M allows bridging any audio line, adjusting the gain, and driving a balanced or unbalanced line. The circuit design allows the input to accept either balanced or unbalanced signals, of either high or low impedance. This is an instrumentation type input stage which will amplify the differential input, regardless of ground reference. The output is capable of driving either high or low impedance loads, and the output may be connected either balanced or unbalanced.
RDL's SupplyFlex power...
-
Atlas Sound
Item# ATL-TSD-ML22VCA
The Atlas TSD-ML22VCA is a 2 input, 2 output true VCA with enhanced features including a high quality microphone pre amplifier. VCA's inserted prior to amplification provide a far more efficient solution than transformer-based attenuators for volume adjustment in high power music applications. The dual channel design can provide level control for two separate discrete zones or stereo sources and is perfect for use in sports bars, restaurants, hotels or other installations.
The...
-
JLCooper Electronics
Item# JLC-MLA-10
JLCooper Electronics extends the distance of MIDI with the MLA Series - MIDI Line Amplifiers. They let you effectively extend MIDI cable length using twisted pair wire or a standard audio snake. MIDI Line Amplifiers are specifically designed for sending MIDI data over long distances with the capability to send information in excess of 1000 feet. Ideal for touring systems or permanent installations, MLA's can be used in schools, recording and production facilities, board- rooms, live performances,...
Our Price: $549.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
JLCooper Electronics
Item# JLC-MLA-XLR
MLA-XLR is a single channel, bidirectional, long distance amplifier or driver for MIDI signals. It extends the range of MIDI to over 1000 feet using standard balanced audio lines (audio snakes, mic cables, etc.).
MLA-XLR is refreshingly simple to use. There are no settings to configure. Just plug in the power supply and connect two MLA- XLRs together with a pair of standard mic cables. Then, connect your MIDI gear as you would normally.
While the MIDI protocol specifies a...
-
Radial Engineering
Item# RAD-J4
The Radial J+4 is a stereo interface designed to accept unbalanced low output level devices such as instruments, computers or CD players and boost the signal to a balanced +4dB level for easy manipulation in professional environments such as broadcast, recording studios and live touring.
The design begins with 100% discrete components for optimal signal transfer. Careful attention has been paid to eliminate noise by combining the advantages of active signal buffering with transformer isolation....
-
Bellari
Item# RLS-PA550
The PA550 is a sleeper. It has so much gain potential that it will drive any amplifier made with ease, and not even break a sweat. The amount of headroom available in the PA550 can only be rivaled by pre's that cost enough to drain anyone's bank account. The PA550 tone is full bodied, letting you know right away that all frequencies are covered and nothing is masked. It never gives you the impression that it is making the treble too shimmery, or that the bass response has been overly...
-
Bellari
Item# RLS-PA555
The Bellari PA555 Preamplifier doesn't just sound "good for the money", the PA555 sounds "good for any amount of money."
We hope you're enjoying the current retro music trends especially with vinyl, tube tuners and turtables. Bellari wants to further enhance your listening experience by offering the PA555 an essential piece of gear that wull make listening to your music collection more rewarding. Bellari has built a product specifically for you vinyl and retro lovers but doesn' tsimply...
-
Bellari
Item# RLS-PP532
The PP532 pre amplifier, is a completely passive design with absolutely nothing added to your audio signal path. That means no power required, no electronics used and no distortion will ever be added to your music. It is the most effective way to reach high-end audio quality, and you will save enough coin that you can buy the more expensive speakers you have been eyeing. The chassis is made from .090 steel, meaning it is 3 times thicker than most chassis. Four pairs of RCA inputs...
-
Rolls Corporation
Item# RLS-RM85
The RM85 is an 8 channel two zone mixer. Channels 1-4 will accommodate XLR microphone or XLR line level inputs. Channels 5-8 are 1/4" inputs. All 8 channels can be sent to the two XLR outputs in three configurations; A, B or both A+B. The separate A and B outputs are XLR and either can be selected to be Line or Microphone level output. Channel 8 also has a stereo 3.5mm (1/8") input on the front of the RM85. Features: Four XLR balanced inputs with +48 V phantom power
Four stereo...
Our Price: $379.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List-
Bellari
Item# RLS-VP549
The Bellari VP549 phono pre has excellent true sound resolution. It's tone center is right in the middle of the music. It performs very well on the extremes, and never looses its solid performance in the meat of the music. Has a well rounded sound when needed, but has a very surprising shimmer when called on. The VP549 is bold, yet has a very surprising attack that will take your rig to the next level. Hundreds of hours went in to listening and improving the design. All Bellari...
-
Radio Design Labs
Item# ST-TC1
The ST-TC1 is intended to be connected to an on-site telephone system switching unit KSU. It is NOT intended to be connected directly to a telephone CO line. Connections from the ST-TC1 go into the telephone switching unit as if the ST-TC1 was an incoming phone line.
When the KSU seizes the line to the ST-TC1, a relay contact closure is provided which can be used to control a variety of equipment, such as a paging system or radio system. The closure is maintained as long as the line is seized....
-
Radio Design Labs
Item# ST-UBA2
The ST-UBA2 is used in any application requiring conversion from unbalanced consumer format signals to professional +4 dBu. It may be used to balance audio from CD players, cassette decks, computer sound cards, televisions, and a wide variety of other unbalanced sources. The mono sum output may be used to drive patch-bay jacks, monitors or subwoofer amplifiers.
Separate Dual-LED VU metering is provided for the left and right outputs. A green LED illuminates at 15 dB below +4 dBu. The intensity...
