Speaker Components

Penn-Elcom 9101 7/8 Inch Diameter Small Rubber Foot with Steel Washer

Penn Elcom Inc

Item# PENN-9101

7/8 Inch Diameter Small Rubber Foot with Steel Washer. Features: Specifications:

Free Shipping with Minimum Order Banner

Our Price: $0.88

Availability: Usually Ships in 5-14 Days

Mackie TH-15A-BAG Protective Bag for Thump TH-15A Powered Speaker

Mackie

Item# TH-15A-BAG

The perfect protection for transporting your portable TH-15A Powered Speaker - a high-quality Mackie bag.

Free Shipping with Minimum Order Banner

Our Price: $74.99

Availability: Usually Ships in 5-14 Days

Yamaha YBSP400i Rolling Case for STAGEPAS 400i

Yamaha Corporation

Item# YMH-YBSP400I

The Yamaha YBSP400i is a rolling case for STAGEPAS 400i portable PA system. Features: Specifications:

Free Shipping with Minimum Order Banner

Our Price: $164.99

Availability: Usually Ships in 5-14 Days

Lowell LUH-BOX Indoor/Outdoor Welded Steel 10.5 Inch X 10.5 Inch Enclosure For Unihorn

Lowell Manufacturing Co.

Item# LMC-LUH-BOX

The Lowell LUH-BOX recessed or surface-mount steel enclosure for use with Lowell Unihorn™ model LUH-15TA. The enclosure is stainless steel construction with Network Grey powder epoxy finish is suitable for indoor or outdoor installation. Features: Variety of mounting holes (hardware to be furnished by installer) Specifications: Material: 20-gauge stainless steel with welded seams. Network Grey powder epoxy finish. Size: 10.50 in. square Depth: 4.00 in.

Free Shipping with Minimum Order Banner

Our Price: $175.82

Availability: Usually Ships in 5-14 Days

LD Systems M11 G3 SUB PC - Padded Protective Cover for LD Maui 11 G3 Subwoofer

Item# LDS-M11G3SUBPC

With the padded protective cover made of durable and water-repellent 1680D nylon, the MAUI 11 G3 subwoofer is optimally protected from the weather and other influences. The 8mm thick padded cover slides easily over the upright subwoofer and, together with the optional MAUI 11 G3 CB castor board, provides complete protection from all sides. The reinforced cut-out with a Velcro flap on the top make it easy to grab and carry the subwoofer even with protection. The protective cover has an external...

Free Shipping with Minimum Order Banner

Our Price: $59.99

Availability: Usually Ships in 5-14 Days

LD Systems LDM5SATBAG Transport Bag for MAUI 5 Column Speaker - Holds All Three MAUI 5 Column Elements

Item# LDS-M5SATBAG

Made of abrasion resistant and water repellent ballistic 1680D nylon, the MAUI 5 column bag is designed for convenient transport and protection. It features a rugged heavy gauge zipper, an accessory compartment for cables etc. and thick 8 mm padding. The bag holds all three MAUI 5 column elements. Specifications: Product number: LDM5SATBAG Product type: Transport bag Colour: black Material: Nylon 1680D Thickness of the padding: 8mm Latch: zip Width: 260mm Height: 640mm Depth: 260mm...

Free Shipping with Minimum Order Banner

Our Price: $75.99

Availability: Usually Ships in 5-14 Days

LD Systems LDM5SUBPC Protective Cover for MAUI 5 Subwoofer

Item# LDS-M5SUBPC

Protective cover for the MAUI 5 subwoofer made of resistant Nylon 1680D with 8 mm padding and rear zip for easy access to the carrying handle. Specifications: Product number: LDM5SUBPC Product type: protective cover for speakers Material: Nylon 1680D Colour: black Thickness of the padding: 8mm Width: 330mm Height: 400mm Depth: 420mm Weight: 0.5kg

Free Shipping with Minimum Order Banner

Our Price: $59.99

Availability: Usually Ships in 5-14 Days

LD Systems M28 G3 SUB PC - Padded Protective Cover for LD Maui 28 G3 Subwoofer

Item# LDS-M28G3SUBPC

With the padded protective cover made of durable and water-repellent 1680D nylon, the MAUI 28 G3 subwoofer is optimally protected from the weather and other influences. The 8mm thick padded cover slides easily over the upright subwoofer and, together with the optional MAUI 28 G3 CB castor board, provides complete protection from all sides. The reinforced cut-outs with a Velcro flap on the sides and on the top make it easy to grab and carry the subwoofer even with protection. The protective cover...

Free Shipping with Minimum Order Banner

Our Price: $59.99

Availability: Usually Ships in 5-14 Days

BOSCH LM2-TB Tile Bridge for LC1 Range / LHM-0606 Speakers - 10-Pack

Bosch Communications

Item# BSH-LM2-TB

Allows you to install an LC1 or LBC3951 series ceiling loudspeaker in a drop-in tile ceiling. The bridge consists of 2 rails and spreads the weight of the speaker for safe installation. Features: Specifications:

Free Shipping with Minimum Order Banner

Our Price: $113.00

Availability: Usually Ships in 5-14 Days

Pure Resonance C3-PK C3 Pendant Speaker Cover Kit with Wire and Safety Cable

Pure Resonance Audio

Item# PRES-C3-PK

The Pure Resonance Audio C3-PK C3 Pendant Speaker Cover Kit is designed for hanging the C3 3 inch Micro speaker (sold separately) in exposed open ceilings, raked ceilings, and other architectures where hanging pendant speakers blend seamlessly with the aesthetic. Ideal for exposed structures or open plenum ceilings with contemporary open architecture the exposed ceiling C3 pendant speaker system delivers sound masking, background music, and paging in high ceiling environments. The...

Free Shipping with Minimum Order Banner

Our Price: $39.99

Availability: Usually Ships in 5-14 Days

Atlas 164-12A Deluxe 12 Inch Steel Baffle for Atlas Q4412 / Q4612 / Q4712 & Q4812 Enclosure - White

Item# ATL-164-12A

The Atlas IED 164-12A features an attractive beveled edge baffles and a square speaker cutout. A separate speaker mounting plate provides for an extended bass response. Large perforations in the protective screen simplify repainting when required to meet interior decor. Unit is finished in textured white epoxy with a black speaker subplate. Features: Attractive Beveled Edge Baffle Features a Square Loudspeaker Cutout. Finished in Textured White Epoxy. Large Perforations in the Protective...

Free Shipping with Minimum Order Banner

Our Price: $96.99

Availability: Usually Ships in 5-14 Days

Atlas Sound PD-30T 30 Watt Compression Driver with Xfmr

Item# ATL-PD30T

The PD-30T is a fully environment-resistant compression driver for indoor or outdoor applications recommended for use in expansive and/or high-ambient sound-level areas. The unit has a power rating of 30 watts, a 1.5" voice coil and a plane wave frequency response of 300 - 3,900 Hz (+5dB). Transformer-equipped Model PD-30T incorporates the exclusive Atlas Sound Vari-Tap® Control/Connect Center with a screwdriver selectable ohms/watts switch. The integral 70V line matching transformer is...

Free Shipping with Minimum Order Banner

Our Price: $174.99

Availability: Usually Ships in 5-14 Days

Atlas B51-4 4 Inch Loudspeaker Combo Package FC104T72/51-4

Item# B51-4

This attractive B51-4 loudspeaker assembly combines the sound performance of a full range 4" high compliance loudspeaker with the job site convenience and economy of a factory-assembled loudspeaker, transformer and baffle. Model incorporates the popular Atlas Sound FC104 high performance loudspeaker, recognized for full-range voice and music reproduction. Unit provides wide-angle sound dispersion to achieve desired coverage with fewer loudspeakers in distributed systems. Each loudspeaker employs...

Free Shipping with Minimum Order Banner

Our Price: $76.99

Availability: Usually Ships in 5-14 Days

Atlas EZHD72W 10 oz Loudspeaker & Transformer 4 Watt 25/70.7 Volt

Item# EZHD72W

The Atlas EZHD72W is an 8" In-Ceiling Loudspeaker Package featuring a 4W 25V/70V transformer, 51-8 baffle and drop tile support rails. . The "EZ Mount Support System" transfers the composite weight of the loudspeaker, baffle, and enclosure to the ceiling's support members via adjustable support rails (included). The rails may be adjusted vertically and then secured to the specially designed, pre-mounted enclosure brackets with screws (furnished). No tile bridge or time-consuming...

Free Shipping with Minimum Order Banner

Our Price: $72.99

Availability: Usually Ships in 5-14 Days

Atlas HLE-1 UL Listed Explosion-Proof Driver 60W 16 Ohms

Item# HLE-1

Model HLE1 is a explosion-proof compression driver engineered for high-efficiency voice and electronic signal communication in hazardous areas. The driver is protected within a rugged die-cast aluminum housing equipped with 1/2" conduit access and an adjustable mounting bracket. Optional projector horns are available in two styles to meet dispersion requirements. Model HLE/MLE-30 is a high-quality, polycarbonate projector that creates a 120° x 60° pattern for wide area coverage. Model HLE/MLE-32...

Free Shipping with Minimum Order Banner

Our Price: $573.99

Availability: Ships Factory Direct, Typically in 3-10 Business Days

Atlas PD60A Compression Driver 60 W 16 Ohms

Item# PD60A

Model PD-60A is a fully environment-resistant 60 watt driver for indoor or outdoor application recommended for use in expansive and/or high ambient sound-level areas. Unit features magnetic-structure components machined to optimum tolerances, 2" voice coil and a plane wave frequency response of 100 - 3,700 Hz (+5dB). Model PD-60A provides screw-type terminals for matching direct to the 16 ohm voice coil impedance. Corrosion-resistant terminal connections are protected by a transparent, impact-resistant...

Free Shipping with Minimum Order Banner

Our Price: $281.99

Availability: Ships Factory Direct, Typically in 3-10 Business Days

Atlas PD60AT Compression Driver 60 W w/Xfmr

Item# PD60AT

The PD-60AT is a fully environment-resistant 60 watt driver for indoor or outdoor applications recommended for use in expansive and/or high ambient sound-level areas. Unit features a sound chamber, phasing plug and magnetic-structure components machined to optimum tolerances. Plane wave frequency response is 100 - 3,700 Hz (+5dB). The PD-60AT features a built-in varnish impregnated, multi-tap 70 volt line-matching transformer. Corrosion-resistant terminal connections are protected by a transparent,...

Free Shipping with Minimum Order Banner

Our Price: $358.99

Availability: Ships Factory Direct, Typically in 3-10 Business Days

Penn-Elcom H7165K 7x5 Recessed Double Sprung Handle with Extended Grip - Black

Penn Elcom Inc

Item# PENN-H7165K

Recessed rivet protected double sprung handle, extended grip. Heavy gauge 0.059" (1.5 mm) steel construction with a black finish. 14 mounting holes. Dimensions: 5.00" x 7.00" (127.0 x 177.8 mm). Features: Specifications:

Free Shipping with Minimum Order Banner

Our Price: $10.57

Availability: Usually Ships in 5-14 Days

Electro-Voice EVID 4.2T Speaker System w/Transformer - White

Electro-Voice

Item# EV-EVID-42T-WE

Two-way twin 4" woofer and 1" horn loaded 100 x 90 tweeter. Internal 70/100-volt line transformer. Includes Mounting System The EVID 4.2 is a very compact full range loudspeaker ideal for indoor and outdoor applications requiring high-quality sound. It's shape and size make it nearly invisible for use in background/foreground music systems for restaurants, bars, patios, retail, and other applications. The 4.2's three-dimensional elliptic baffle symmetrically locates the 1" Ti high frequency element...

Free Shipping with Minimum Order Banner

Our Price: $419.00

Availability: Ships Factory Direct, Typically in 3-10 Business Days

Lowell 810-T72 15W 8 Inch Dual-Cone Transducer w/ 25V/70V Transformer

Lowell Manufacturing Co.

Item# LMC-810-T72

The Lowell 810-T72 dual cone 8-inch 15W driver with mounted dual voltage (25V/70V) 5W transformer provides solid performance for paging and background music. The driver features a 10 oz. ceramic magnet, 3/4-inch hard fiber whizzer cone, 1-inch voice coil and 20-gauge steel frame with zinc-plated finish. Meets or exceeds applicable E.I.A. standards. Features: Specifications: Driver: 8 in. 15W dual cone driver with 10 oz. ceramic magnet, hard fiber whizzer cone and 1 in. voice coil. Frame:...

Free Shipping with Minimum Order Banner

Our Price: $45.41

Availability: Usually Ships in 5-14 Days

Community Pro Loudspeakers

Community VLF-Y208 Yoke Bracket Black

Item# CMTY-VLF-Y208

The VLF-Y208 yoke bracket is designed to mount the VLF208 subwoofer in either a vertical or horizontal orientation. Features: Specifications:

Free Shipping with Minimum Order Banner

Our Price: $116.00

Availability: Usually Ships in 5-14 Days

Community Pro Loudspeakers

Community VLF-Y208W Yoke Bracket White

Item# CMTY-VLF-Y208W

The VLF-Y208 yoke bracket is designed to mount the VLF208 subwoofer in either a vertical or horizontal orientation. It is engineered to provide a high margin of safety when supporting the VLF208 subwoofer. Yokes are manufactured of steel, covered with a durable powder-coat finish, and are available in either black or white to match the color of the enclosure. The VLF-Y208 yoke bracket is provided with the hardware required to attach it to the loudspeaker enclosure. No additional hardware is...

Free Shipping with Minimum Order Banner

Our Price: $116.00

Availability: Usually Ships in 5-14 Days

Community Pro Loudspeakers

Community Pro Loudspeakers VB-Y12 Speaker Mounting Bracket

Item# VB-Y12

The Community Pro VB-Y12 are U-shaped yoke mounting brackets with optional 10° and 20° standoffs. Allows for direct horizontal and vertical (0ø) mounting to a wall or ceiling, as well as a 10° or 20° downward or upward vertical tilt. Also used in conjunction with other VERIS 2 mounting accessories. Yoke Mounting Bracket is included with compact VERIS 2 models V2-6, V2-8, V2-26 and V2-28. Yoke Mounting Bracket is sold separately for large VERIS 2 models V2-12,...

Free Shipping with Minimum Order Banner

Our Price: $226.00

Availability: Usually Ships in 5-14 Days

Penn-Elcom F1686/20 20mm High Large Rubber Foot with Steel Washer

Penn Elcom Inc

Item# PENN-F1686-20

ATA case large rubber foot with steel washer. Features: Specifications: Diameter: 38mm / 1.5" Height: 19mm / 3/4" Weight: 0.030Kg / 0.066Lb

Free Shipping with Minimum Order Banner

Our Price: $4.04

Availability: In Stock