Ashly Audio NX4004 Multi-Mode Power Amplifier 4 x 400 Watts @ 2/4/8 Ohms or 25V/70V

ITEM #: ASH-NX4004 MFG #: NX4004

Primary Image
  • Product Image Thumbnail 1 of 2
  • Product Image Thumbnail 2 of 2
Free Shipping with $49 Minimum Order

List Price:

$3,749.00

Our Price:

$2,999.00

Availability: Typically Ships in 3-10 Business Days
iAvailability Description Popup


    NX4004 - Overview

    Ashly NX4004 nX Multi-Mode Amplifiers feature energy-efficient Class-D switching amplifier technology combined with a switch mode power supply. All feature Selectable Outputs on each channel so you can connect to virtually any speaker: low impedance (2, 4, and 8-ohm), or constant voltage (70V or 100V). Offered in 2- and 4 Channels, nX is available in two and four-channel models with 3000, 1500, 800, 400, 150 and 75 Watts per channel.

    • Features:

      • Rear panel DIP switches select low impedance (2, 4, and 8 Ohm), constant voltage (70V or 100V), high pass filter, limiter and input gain on each channel
      • Ashly Energy Management System (EMS) for increased efficiency) automatic <1Wsleep-mode (defeatable)
      • Switch mode power supply automatically detects 120V or 240V AC operation
      • Extensive protection circuitry
      • Continuously variable cooling fans
      • Front panel power switch and level controls (can be disabled for security)
      • Multiple internal power supplies provide increased channel separation and reliability
      • Remote DC level control on each input channel (2 RU models only)
      • Genuine Neutrik® connectors on 2 RU models for security, safety, and reliability
      • Safety / Compliance: cTUVus, CE, FCC, RoHS
       
    • Specifications:

      • Voltage Gain: Selectable at 26dB, 32dB, 38dB, or 1.4V
      • Damping Factor: >250 (8 Ohms load <1kHz)
      • Input High Pass Filter: 80Hz 2nd order
      • Distortion (SMPTE, typical): <0.5%
      • Distortion (THD-N, typical): <0.5% (8 Ohms, 10dB below rated power, 20Hz-20kHz)
      • Channel Separation: -75dB (dB from full output, 1kHz)
      • Signal to Noise (20Hz-20kHz, unweighted):
        >114dB (all 3.0x models)
        >111dB (all 1.5x models)
        >108dB (all 800x models)
        >105dB (all 400x models)
      • Frequency Response: 20Hz-20kHz, +/-0.05dB
      • Balanced Input Connector: Euroblock 3.5mm, 1/4" TRS and XLR Combo jack
      • Input Impedance: 10k Ohms
      • Maximum Input Level: +21dBu
      • Speaker Output Connector: Neutrik® speakON®
      • Remote DC Level Control: Euroblock 3.5mm - Gnd, CV, V+ per input
      • Attenuators (per channel): Front panel and remote. Fully off = Mute
      • Amplifier Protection: Inrush current limitation, temperature monitoring, output over-power protection, mains fuses
      • Airflow: In through sides, Out through front
      • Cooling: Continuously variable temperature controlled axial fan(s)
      • Environmental: 32° to 113°F (0° to 45°C) (non-condensing)
       
    • GTIN:

      0694970612235
       

    NX4004 - Required Accessories

      California Residents:
      WARNING:
      Cancer and Reproductive Harm - www.P65Warnings.ca.gov