Being the first telescopic parapet on the market, AXIS T91D62 Telescopic Parapet Mount helps installer to adjust the arm length of the mount. This is useful when the camera needs to see above thick parapets or any obstructive elements on the facade of the building. You can connect the Ethernet cable to an RJ45 connector grip at either end of the internal fish tape to pull the Ethernet cable through the pipe.
AXIS T91D62 Telescopic Parapet Mount is made for parapet and wall installations when the requirement is to place the camera further out from the wall. To compensate for different parapet thicknesses or obstructive elements on the facade of the building, the arm length is adjustable. Its ability to swivel 180 degrees on its own axis, allows for easy and safe mounting/maintenance of the camera from a rooftop. The mount is intended for outdoor fixed and PTZ dome cameras supporting 1.5" NPS thread. A retrofit mounting bracket (optional accessory) makes it possible to reuse holes drilled for Pelco's PTZ dome parapet mount.
AXIS T91D62 Telescopic Parapet Mount can also be used as a wall mount when there is a requirement to place the camera further out from the wall compared to standard mounts.AXIS T94A01D is designed to be used in combination with PTZ cameras.
Supported products:
AXIS M30 Series (requires AXIS T94F01D Pendant Kit)
AXIS P32 Series (requires AXIS T94T01D/T94K01D Pendant Kits)
AXIS P33 Series (requires AXIS T94T01D/T94K01D Pendant Kits)
AXIS P56 Series (requires AXIS AXIS T94A01D Pendant Kit)
AXIS Q35-V cameras (requires AXIS T94K01D Pendant Kit)
AXIS Q35-VE cameras (requires AXIS T94M01D Pendant Kit)
AXIS Q37 Series (requires AXIS AXIS T94A01D Pendant Kit)
AXIS Q60 Series (requires AXIS AXIS T94A01D Pendant Kit)
AXIS Q61 Series (requires AXIS AXIS T94A01D Pendant Kit)
Please Note: Camera sold seperately.