Genelec 8020DPM Studio Monitor with Power Management - Producer Finish

8020DPM - Overview

• Features:

  • 4" Woofer, 3/4" Tweeter
  • 50W Bass Amplifier
  • 50W Treble Amplifier
  • Curved Edges Reduce Distortions
  • Wide On- and Off- Axis Response
  • Die-Cast Aluminum Enclosure
  • Iso-Pod Table Stand Reduces Vibration
  • Auto-Switching to Standby Saves Power
  • Class-D Amplification
   

• Specifications:

  • Cut-Off Frequency: Lower: ≤ 56 Hz at -6 dB; Upper: ≥ 25 kHz at -6 dB
  • Frequency Response: 62 Hz to 20 kHz (±2.5 dB)
  • SPL: ≥ 100 dB SPL maximum (short-term sine-wave acoustic output on axis in half-space, averaged from 100 Hz to 3 kHz at 3.3' / 1 m); 93 dB SPL maximum (long-term RMS acoustic output in the same conditions with IEC weighted noise (limited by driver protection circuit) at 3.3' / 1 m)
  • Peak Output Capacity: ≥ 107 db maximum peak acoustic output (per pair in listening room with music material at 3.3' / 1 m)
  • Self-Generated Noise Level: ≤ 5 dB (in free field at 3.3' / 1 m on axis (A-weighted))
  • Harmonic Distortion: < 3% (at 85 dB SPL at 3.3'; 1 m on axis, 50 to 200 Hz) < 0.5% (at 85 dB SPL at 3.3' / 1 m on axis, higher than 200 Hz)
  • Drivers Bass: 4" / 105 mm cone; Treble: 3/4"; 19 mm metal dome. Both drivers are magnetically shielded.
  • Amplifier: Bass Amplifier Short-Term Output Power: 50 W; Treble: Amplifier Short-Term Output Power: 50 W; Long-term output power is limited by driver protection circuitry
  • THD: ≤ 0.05% at nominal output
  • Crossover Frequency: Bass/Treble: 3 kHz
  • Digital Controls: GLM Software Frequency Response Adjustment; Parametric Notch Filters: 16x; Shelving Filters: 2 x LF and 2 x HF System Room Response Calibration: Genelec GLM AutoCal, GLM manual, standalone
  • Mains Voltage: 100 to 240 VAC 50/60 Hz
  • Power Consumption: Idle: 3 W; Standby: < 0.5 W; Full Output: 60 W
  • Analog Input: XLR female, balanced (pin 1 ground, pin 2 positive, pin 3 negative)
  • Input Level: -6 dBu at volume control max (for 100 dB SPL at 3.3' / 1 m)
  • Input Impedance: 10 kOhms
  • Sensitivity: -12 dB (constantly variable, control range relative to maximum output)
  • Controls: Treble Tilt Control (operating range): 0 to -2 dB at 15 kHz; Desktop 200-Hz Control: -4 dB at 200 Hz; Bass Roll-Off Control: 0 to -4 dB at 65 Hz
  • Analog Input: Maximum Analog Input Level: +24 dBu
  • Analog Input Sensitivity: -6 dBu (100 dBSPL at 3.3' / 1 m)
  • Analog Input Sensitivity Control: Adjustable from +36 to -6 dBu
  • Dimensions(H x W x D): 9.5 x 6.0 x 5.6" (242.0 x 151.0 x 142.0 mm)(Iso-Pod stand included); 9.1 x 6.0 x 5.6" (230.0 x 151.0 x 142.0 mm)(Iso-Pod stand excluded)
  • Weight: 7.0 lb (3.2 kg)
   

• GTIN:

  6438128122566