Lectrosonics DNT22 Dante Interface - 2 Inputs

ITEM #: LEC-DNT22 MFG #: DNT22

Primary Image

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the LEC-DNT22

DNT22 - Overview

The LECTROSONICS DNT22 I/O Interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante™ audio to an existing Dante-based networked audio system. The DNT22's small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.

Note: Power supply not included. No DC power is required if the DIO2x2 is used with a PoE Ethernet switch.

Highlighted Features
Small form factor, can be unobtrusivelylocated near analog sources or sinks.
Dual power (DC or PoE) means the DIO2x2 will work in systems with either standard or PoE Ethernet switches.
Three input gains accommodate common line levels, phantom power and dynamic mics.
+24V Phantom power per channel - powers virtually all types of phantom powered microphones typically used in installed AV systems.
Two analog output gains to accommodate both consumer and pro line level requirements without overload.

  • Features:

    • Small form factor, can be unobtrusively located near analog sources or sinks
    • Dual power (DC or PoE) means the DIO2x2 will work in systems with either standard or PoE Ethernet switches
    • Three input gains accommodate common line levels, phantom power and dynamic mics
    • +24V Phantom power per channel - powers virtually all types of phantom powered microphones typically used in installed AV systems
    • Two analog output gains to accommodate both consumer and pro line level requirements without overload
     
  • Specifications:

    • Mic/Line Input Type: Balanced and RF filtered 3-pin depluggable
    • Phantom Power: +24V, software selectable
    • Mic/Line Gain: 0dB, +25dB, +40dB, software selectable
    • Input impedance: >1.8K ohms at any gain setting
    • Equivalent Input Noise: 115dBu (+40dB gain)
    • Maximum Input Levels: +8dBu @ 0dB gain, -16dBu @ +25dB gain,
    • -31dBu @ +40dB gain
    • Output Type: Balanced line level with automatic muting on
    • loss of Dante signal
    • Output Gain: 0dB or +10dB, software selectable
    • Output Noise: <90dBu @ 0dB gain
    • Maximum Output Level: +12dBu
    • System THD: <.01% at any gain, input signal 3dB
    • below maximum
    • PoE Class: Class 0 802.3af PoE PD compliant
    • Certifications: FCC Part 15 Class A, CE
    • Dimensions: 1.06"H x 6.45"W x 3.45"D
    • Operating Temperature: 0°C - 40° C
     

DNT22 - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov