-
Item# LEC-M152-5P
The M152 is a high performance microphone with heavily suppressed mechanical noise for critical applications. A wide, flat frequency response is augmented by a 2 or 3 dB bump in the upper octaves to add a crisper sound. The mic capsule should be positioned in the center of the talker's chest, not to either side, as high up as is practical. In windy conditions, it can be placed underneath a collar or thin clothing to reduce wind noise, although this will dull the sound somewhat.
Specifications:...

-
Item# LEC-DBU
The Lectrosonics DBu transmitter is a 4th generation design with specially developed, high-efficiency digital circuitry for extended operating time on two AA batteries. The transmitter can tune in coarse or fine steps across the UHF television band from 470 to 608 MHz (470-614 MHz for export versions), with a selectable output power of 25 or 50 mW. The pure digital architecture enables AES 256-CTR encryption for high-level security applications.
The top panel contains the antenna jack,...

Our Price: $1,769.00
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
-
Item# LEC-IFBR1B-A1
Wireless IFB (interruptible fold back) systems are used for talent cueing and crew communications in broadcast and motion picture production. In other cases, the IFB system is used by directors and other management to monitor program audio during a production. The Lectrosonics IFBR1B-A1 470.100 - 537.575 Mhz receiver provides simplicity and flexibility in a package that is intuitive for untrained users to operate. Despite its tiny size, the new IFBR1B receiver offers excellent performance...

-
Item# LEC-LT-A1
The LT transmitter offers a full set of professional features in a compact, rugged package. The unit is compatible with all Digital Hybrid Wirelessr receivers and even some from other manufacturers, making it comfortable in a wide variety of applications from video production to theater, stage and house of worship.
The LT can be configured to operate as a "one touch" device with a single power on/off switch on the top panel, or with full access to all operational parameters using the side panel...

Our Price: $1,394.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# LEC-IFBR1B-B1
Wireless IFB (interruptible fold back) systems are used for talent cueing and crew communications in broadcast and motion picture production. In other cases, the IFB system is used by directors and other management to monitor program audio during a production. The Lectrosonics IFBR1B-B1 537.600 - 614.375 Mhz receiver provides simplicity and flexibility in a package that is intuitive for untrained users to operate. Despite its tiny size, the new IFBR1B receiver offers excellent performance...

Our Price: $804.00
Availability: Extended Lead Time. Email, Chat or Call Us for more details.
Add to Wish List
-
Item# LEC-DNT22
The LECTROSONICS DNT22 I/O Interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante™ audio to an existing Dante-based networked audio system. The DNT22's small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.
Note: Power supply not included. No DC power is required if the DIO2x2...

-
Item# LEC-CHSIFBR1B
This Lectrosonics CHSIFBR1B battery charging station provides a convenient and organized means of recharging any combination of up to 4 LB-50 batteries or IFBR1B receivers. Each charging module may be daisy-chained to 3 additional modules using a single DCR5/A9U power supply for a total of up to 16 units charging at once (LB50's and/or IFBR1Bs). The CHSIFBR1B charging station features an individual LED on each charging module. Red indicates the battery is charging and green indicates the...

-
Item# LEC-DCR5-9AU
The Lectrosonics DCR5/9AU power supply is required for use with the charger, and can power up to 4 modules.

-
Item# 21425
Lectrosonics 21425 is a 6 foot long coaxial to stripped and tinned leads power cord.
Specifications: Connector 1: 5.5mm DC Coaxial Barrel
Connector 2: Flying leads
Length: 6.0'
Packaging Weight: 0.1 lb

-
Item# LEC-IFBR1BBCSL
Lectrosonics IFBR1BBCSL is a Spring Loaded Beltclip for IFBR1B Receiver

-
Item# LEC-DCR12-A5U
Universal AC power supply intended for Lectrosonics IFBT4,
IFBT4-VHF and IFBT4/E01 transmitters.

-
Item# LEC-RATPAC
Build a right angle TA5 or TA3 connector
The RATPAC (Right Angle T connector PACkage) is a versatile kit for building a right angle connector for use with the SR receiver or Lectrosonics transmitters. The 3-pin configuration is normally used for the rear panel audio outputs of the SR receiver. The 5-pin configuration is the standard connector for most belt pack transmitters and the front panel outputs on the 5P version of the SR receiver.
The kit includes a standard TA5F connector,...

-
Item# LEC-SPNDNT
In essence, the Lectrosonics SPNDNT is a full function DSP mixer and processor like other ASPEN models except that instead of analog I/O ports, it uses digital network Dante ports. The processor combines Dante networked digital audio with the ASPEN digital matrix to expand signal routing options. The on-board Audinate® Brooklyn II module functions as a native Dante device using standard ethernet or AVB compliant switches.
The processor also handles the clock synchronization...

-
Item# LEC-DNTBOB88
Lectrosonics BOB 88 is a high quality, general purpose interface to transmit and receive line level analog audio signals via a Dante network. Analog inputs are converted to digital and appear on the network as transmit channels. Audio for the analog outputs is taken from subscriptions to transmit channels on the network from other sources. When connected to a network, each break out box will appear as a separate device in the Dante Controller software interface. Features: 8 balanced...

-
Item# LEC-MCAES3
Lectrosonics MCAES3 is an 18 inch TA5F to 3-pin XLRF cable adapter for 2-channel AES digital input for the LEC-SPDR stereo portable digital recorder.
Features: Transmission of AES3
Rugged RG-174U Coaxial Cable
TA5F Connector
For Use with SPDR Recorder
Specifications: Connectors
TA5F 5-pin female
XLR 3-pin female
Cable Length
18 inch (45.7 cm)

Our Price: $104.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# LEC-SPDR
The SPDR is Lectrosonics' response to customer demand for a small, lightweight dual channel recorder for use on virtual reality sound captures or as a backup recorder for bag systems in the field. The SPDR will let you capture the full stereo audio of an extreme sport participant, in-car scenes or in situations where a wireless system cannot be used.
When used in conjunction with a small mixer and the SRC receiver, the SPDR makes for a lightweight interview setup that provides...

Our Price: $1,349.00
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# LEC-MCATA5MLEMO
Lectrosonics MCATA5MLEMO mic cable adapter converts standard TA5F microphones to LEMO connector for use with SSM Transmitter.

-
Item# LEC-MCSRXLR
12 inch audio cable for SR receiver, TA3F plug to 3 pin male XLR.The Lectrosonics MCSRXLR TA3 to XLR Cable is intended for use with the Lectronics SR receiver, when used with the External Mounting Kit SREXT. The XLR connector adapts to the balanced inputs on professional cameras.

-
Item# LEC-BATTSLED
The BATTSLED is a universal battery sled power supply adapter for L or M style battery packs. This handy accessory provides extended operating time and serves as a backup power supply for Lectrosonics transmitters and receivers. Common L and M style video camera rechargeable batteries are retained by spring tabs in the bottom plate. 9 volt batteries can also be used with the optional SR9VBP adapter.
The power output is a threaded locking coaxial connector that is used on many Lectrosonics...

-
Item# LEC-40107
Lectrosonics 40107 is a battery charger kit for Lectrosonics LB-50 battery; includes charger, EU plug adapter and vehicle auxiliary power cord.

-
Item# LEC-PR1A
Black Leather pouch for IFBR1a receiver

-
Item# LEC-CCMINI
A soft sided, padded and zippered carrying case for compact wireless systems such as the UCR400, UCR401, and other UCR units.

-
Item# LEC-SPN1612
From small installations all the way up to sophisticated, multi-layered systems, these ASPEN mixers are the perfect compliment to your audio integration. Unlimited input expansion and 48 mix buses give you phenomenal scalibility. The Proportional Gain Algorithm provides seamless auto-mixing and integrates easily with with echo cancellation, analog mixing consoles, or any other type of audio system. And with TCP/IP addressibility for control through Ethernet, ASPEN is now part of your network.
Any...

Our Price: $5,770.18
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List
-
Item# LEC-SPN812
From small installations all the way up to sophisticated, multi-layered systems, this Lectrosonics SPN812 mixer is the perfect complement to your audio integration. Unlimited input expansion and 48 mix buses give you phenomenal scalability. The Proportional Gain Algorithm provides seamless auto-mixing and integrates easily with echo cancellation, analog mixing consoles, or any other type of audio system. And with TCP/IP addressability for control through Ethernet, ASPEN is now part of your...

-
Item# LEC-DNT0212
Lectrosonics DNT0212 processor subscribes to channels on a Dante network and delivers them to an internal digital matrix for automatic mixing and processing, and to Dante network transmit channels. In addition, two analog line level inputs are provided for use with local sources audio sources such as voice evacuation announcements.
The outputs of the matrix can be assigned to a Dante transmit channel, an analog output and/or routed back to an input to be further mixed and processed with...

Our Price: $3,811.06
Availability: Direct Ship from manufacturer, contact us for availability
Add to Wish List