Magenta 2620006-03 MultiView II AK600DP-A VGA Extender - Receiver

ITEM #: MGE-2620006-03 MFG #: 2620006-03

Primary Image
  • Product Image Thumbnail 1 of 3
  • Product Image Thumbnail 2 of 3
  • Product Image Thumbnail 3 of 3

This item is no longer available.
Ask a Markertek Expert if you need assistance finding an appropriate substitute.

(800) 522-2025Email

Items similar to the MGE-2620006-03

2620006-03 - Overview

Compatible with all MultiView building block components, the MultiView II AK600DP receiver supports the extension of 1920x1200 resolution video from 1 to 600ft/183m.

This brand new MultiView II iteration of the AK600 receiver boasts improved sync management and handling, streamlined fourth pair options (for audio and/or serial), and an all external configuration scheme that gives users total control over the unit. As a result, this product is easier set up and adjust and even better at replicating 1080p (and higher) high-resolution video.

The built-in daisy chaining capability allows the AK600DP to be part of a chain of up to 12 compatible MultiView receivers. With distance equalization based on patent pending Digitally Controlled, Complex State Variable Filter technology, the AK600DP delivers pristine image and sound quality across the entire supported distance range.

In applications where the distance and resolution requirements are high and skew free UTP cabling is not utilized, the AK600DP is also available with Magenta's optional AkuComp II technology which can compensate for up to 62ns of cable skew.

  • Features:

    • RGBHV and non-RGBHV1 video support
    • Supports 1920x1200 resolution from 1 to 600ft/183m
    • Available in all MultiView-`X' functionality versions
    • Compatible with all MultiView transmitters, receivers, distribution amplifiers and matrix switchers
    • Local UTP output for daisy chain support4
    • Optional Akucomp II technology for skew compensation
    • Optional mount kits and mini-dense power supplies for rack-mount / rigid installations
     
  • Specifications:

    • Video In HD15-F
    • Video Out HD15-F
    • Audio In 4-pin Phoenix
    • Audio Out - none
    • Serial In 4-pin Phoenix
    • (replace audio-in)
    • Serial Out - None
    • UTP In - None
    • UTP Out RJ-45

    • General Specifications:
    • Video Support: All VESA modes to WUXGA (1920x1200), RGBHV, RGB Composite (NTSC, PAL, SECAM), S-Video, Component Video Widescreen Modes, HDTV Modes including 1080p, 1080i & 720p
    • Resolution / Refresh Rate: MultiView Receiver Dependent
    • Required Source Impedence: Video Out: 75 Ohms; Audio Out (if applicable) 600 Ohms maximum; SPDIF Audio models: 75 Ohms
    • Required Destination Impedence: Video In: 75 Ohms; Audio In (If applicable) 600 Ohms maximum; SPDIF Audio models: 75 Ohms

    • Audio Support:
    • Left/Right Summed Audio
    • 47K ohms input impedance.
    • A source device with 600 ohms maximum output impedance is recommended (analog audio input mode)

    • Serial Support - None
    • Cable Supported: Category 5, 5e and 6 Shielded Twisted-Pair (STP) or Unshielded Twisted-Pair (UTP), low-skew preferred or skew-free cable.
    • Cascading Capability: Yes, Video Only
    • Compliance: CE; FCC Class A, IC Class A, I.T.E. Device, RoHS
    • Power +5 VDC @ 1.2 Amps max.
    • Consumption: 6 Watts Maximum
    • Temperature Tolerance Operating: 32 to 104°F (0 to-40°C)ÿÿÿ Storage: -4 to 140°F (-20 to 60°C)
    • Humidity Tolerance Up to 80% Non-Condensing
    • Mounting Rack Mount Standard/Wall Mount Optional
    • Enclosure Steel, Black Powder-Coat Finish
    • Size 1.2"H x 4.2"W x 4.3"D (3.1 x 10.4 x 10.9 cm)
    • Weight 0.6 pound (0.27 kg)
    • Skew Compensation 1.0 pound (0.45 kg)
     

2620006-03 - Required Accessories

    California Residents:
    WARNING:
    Cancer and Reproductive Harm - www.P65Warnings.ca.gov