MuxLab 500485 HDMI 2.0 / Single Mode Fiber Extender Kit - Resolutions up to 4K2K@60Hz

500485 - Overview

HDMI 2.0 Fiber Extender Kit, Single Mode

• Features:

  • Supports HDMI 4K @ 60fps (4:4:4 8bits)
  • Supports HDR, which is 4K @ 60fps (4:2:0 10bits)
  • Supports HDCP 2.2
  • Extends HDMI signals up to 10km over single mode fiber optic cable
  • Supports USB 1.1 for keyboard and mouse only
  • Bi-directional IR pass-through
  • Supports full frequency IR signal from 20KHz to 60KHz
  • Includes wall-mount bracket kit
   

• Specifications:

  • HDMI compliance: HDMI 2.0a
  • HDCP compliance: HDCP 2.2
  • Video bandwidth: Single-link 594MHz [18Gbps]
  • Video support: HDR 4K@60 (4:2:0 10bits) / 4K@60 (4:4:4 8bits)
  • Audio support: Surround sound [up to 7.1ch) or stereo digital audio
  • Input TMDS signal: 1.2 Volts [peak-to-peak]
  • Input DDC signal: 5 Volts [peak-to-peak, TTL]
  • ESD protection: Human body model - ±15kV [air-gap discharge] & ±8kV [contact discharge]
  • PCB stack-up: 4-layer board [impedance control - differential 100Ω; single 50Ω]
  • IR pass-thru: Bi-directional
  • RS-232 support: Yes
  • Input ports: Transmitter [TX] 1x HDMI, 1x 3.5mm Receiver [RX] 1x Duplex LC SMF, 1x 3.5mm, Output ports Transmitter [TX] 1x Duplex LC SMF, 1x 3.5mm Receiver [RX] 1x HDMI, 1x 3.5mm
  • In / Out ports: Transmitter [TX] 1x RS-232, 1x USB Receiver [RX] 1x RS-232, 2xUSB
  • HDMI source control: Controllable via IR pass-through from RX to TX with IR extenders
  • HDMI connector: Type A [19-pin female]
  • USB connector: Type A
  • 3.5mm connector: Transmitter [TX] IR receiver / IR blaster Receiver [RX] IR receiver / IR blaster
  • Housing: Metal enclosure
  • RX/TX Unit Dimensions (DxWxH): 4.9" x 4.4" x 1.1"
  • RX/TX Unit Weight: 1lbs
  • Wall Mounting Hardware: Wall-mount bracket kit, with screws
  • Power supply: 12V2A
  • Power consumption: Max 10W
  • Operation temperature: 32~104°F
  • Storage temperature: -4~140°F
  • Relative humidity: 20~90% RH [no condensation]
   

• Item Includes:

  • 1x HDMI 2.0 Fiber Extender Kit, Single Mode [TX & RX]
  • 1x IR Blaster
  • 1x IR Receiver
  • 2x PSU 12V DC
  • 2x Single Mode Modules
  • 1x Wall bracket kit (with screws)
  • 1x User manual (available via download)
   

• Warranty:

  • 2 years