Plura ELC Ethernet to LTC Converter

ELC - Overview

ELC - Overview

ELC - Details

• Features:

  • PoE power supply.
  • Connectors: 1 x RJ45 for Ethernet/PoE, 2 x RJ45 for LTC outputs.
  • Set-up and firmware update possible via the "UD SC Config" program.
  • Set-up and status display possible via the integrated Ethernet server.
  • All settings will be stored at a non-volatile memory, so the latest set-up will not get lost if ELC was powered off.
  • Frame rate of LTC outputs selectable: 24/25/30/29.97 frames per second.
  • LTC signal level adjustable for each output separately.
  • Source = NTP:
  • One "Primary" and one "Secondary" NTP Server can be addressed.
  • Various date formats can be transported in the binary groups (user data) of the LTC.
  • Based on UTC received from the NTP Server, ELC can output a time & date LTC of any time zone, with or without Daylight Saving Time switching.
  • Source = MTD:
  • Selectable MTDoE group.
  • Time addresses of LTC can be a local real-time or a time of any MTD counter.
  • A date can be transported in the binary groups (user data) of the LTC.
   

• Specifications:

  • Converts all SPT/MTDoE timers into LTC
  • Converts NTP into LTC
  • Generates two individual LTC outputs
  • Turns any Multiviewer or TC-display with an LTC input into a timer display
  • PoE is supported
  • Cost effective portable solution
  • The ELC is a distribution amplifier and converter with one ethernet input and two LTC outputs on RJ45 jacks.
  • Both of the outputs have their own drivers and are individually configurable.
  • Each output signal is phase locked and synchronized to the ethernet reference input.
  • NTP time and date are decoded.
  • In the NTP reading mode, each outgoing LTC can be adjusted with a different offset.
  • MTDoE or SPT timers can be converted into independent LTC signals.
  • Any third-party Time Code displays with LTC input are able to utilized with the MTDoE timer system.
  • Due to PoE capability, an external power supply isn't necessary.
  • The power distribution is accomodated by the network switch.
  • LEDs indicate the operating status.
   

• Warranty:

  • 2 Years
   

ELC - Required Accessories

ELC - Recommended Accessories

ELC - Attachments