Tektronix RSA607A 9 kHz - 7.5 GHz/40 MHz Bandwidth USB Real Time Spectrum Analyzer

RSA607A - Overview

• Features:

  • 9 kHz to 3.0/7.5 GHz frequency range covers a broad range of analysis needs
  • 40 MHz acquisition bandwidth enables real time analysis for transient capture and vector analysis
  • Amplitude accuracy of 0.2 dB to 3 GHz (95% confidence)
  • High speed full-span sweeps (25.0 GHz/sec) for fast setup and discovery
  • Standard GPS/GLONASS/Beidou receiver
  • Optional tracking generator for gain/loss, antenna and cable measurements
  • DataVu-PC software enables multi-unit recording in variable bandwidths
  • SignalVu-PC software offers real time signal processing with DPX® Spectrum/Spectrogram to minimize time spent finding transient problems
  • EMC/EMI pre-compliance and troubleshooting - CISPR detectors, predefined standards, limit lines, easy accessory setup, ambient capture, failure analysis, and report generation
  • 15 µsec minimum signal duration with 100% probability of intercept ensure you see problems first time, every time
  • Application programming interface included for development of custom programs
   

• Specifications:

  • Frequency
  • Frequency range: 9 kHz to 7.5 GHz
  • Frequency marker readout accuracy: ±(RE x MF + 0.001 x Span) Hz, RE: Reference Frequency Error, MF: Marker Frequency [Hz]
  • Initial accuracy at Cal (30 min warm-up): ±1 x 10-6
  • First year aging, typical: ±1 x 10&sup-6; (1 year)
  • Cumulative error (Initial accuracy + temperature + aging) typical: 3 x 10-6 (1 year)
  • Temperature drift: ±0.9 x 10-6 (-10 to 60 °C)
  • External reference input: BNC connector, 50 Ω nominal
  • External reference input frequency: Every 1 MHz from 1 to 20 MHz plus the following: 1.2288 MHz, 2.048 MHz, 2.4576 MHz, 4.8 MHz, 4.9152 MHz, 9.8304 MHz, 13 MHz, and 19.6608 MHz.The spurious level on the input signal must be less than -80 dBc within 100 kHz offset to avoid on-screen spurious.
  • External reference input range: ± 5 ppm
  • External reference input level: -10 to +10 dBm
    
    GNSS
  • Accuracy, when locked to GNSS: ±0.025 ppm
  • GNSS Trained Accuracy, when GNSS antenna is disconnected 1, 3: ±0.025 ppm, ±0.08 ppm
    
    RF input
  • RF Input Impedance: 50 Ω
  • RF VSWR (RF Attn = 20 dB), typical: < 1.2 (10 MHz to 3 GHz), < 1.5 (>3 GHz to 7.5 GHz)
  • RF VSWR preamp ON, RSA607A, typical: < 1.5 (10 MHz to 6 GHz, RF ATT=10 dB, preamp on), < 1.7 (> 6 GHz to 7.5 GHz, RF ATT=10 dB, preamp on)
  • Maximum DC voltage: ±40 V (RF input)
  • Maximum safe input power: +33 dBm (RF input, 10 MHz to 7.5 GHz, RF Attn = 20 dB), +13 dBm (RF input, 9 kHz to 10 MHz, RF Attn = 20 dB), +20 dBm (RF input, RF Attn < 20 dB)
  • Maximum safe input power (Preamp On): +33 dBm (RF input, 10 MHz to 7.5 GHz, RF Attn = 20 dB), +13 dBm (RF input, 9 kHz to 10 MHz, RF Attn = 20 dB)
  • Maximum measurable input power: +30 dBm (RF input, =10 MHz to Fmax, RF ATT Auto), +20 dBm (RF input, <10 MHz, RF ATT Auto)
  • Input RF attenuator: 0 dB to 51 dB (1 dB step)
  • Full span sweep speed, typical mean: 25.0 GHz/sec (RBW = 1 MHz), 24.7 GHz/sec (RBW = 100 kHz), 15.7 GHz/sec (RBW = 10 kHz), 2.0 GHz/sec (RBW = 1 kHz)
    
    Amplitude and RF
  • Reference level setting range: -170 dBm to +40 dBm, 0.1 dB step, (Standard RF input)
  • Center frequency range: 18 °C to 28 °C
  • 9 kHz = 3.0 GHz: ±0.8 dB
  • > 3 to 7.5 GHz: ±1.5 dB
  • Preamp gain: 27 dB at 2 GHz, 21 dB at 6 GHz (RSA607A)
    
    Physical
  • Height: 75.0 mm (2.95 in)
  • Width: 222.3 mm (8.75 in)
  • Depth: 358.6 mm (14.12 in)
  • Net weight: 2.79 kg (6.15 pounds)
    
    Environmental and safety
  • Temperature Operating: -10 °C to +55 °C (+14 °F to +131 °F)
  • Non-operating: -51 °C to +71 °C (-60 °F to +160 °F)
  • Humidity: MIL-PRF-28800F Class 2
   

• Item Includes:

  • 1x Installation and Safety manual
  • 1x USB 3.0 A-to-A cable with screw lock
  • 1x Power cord
  • 1x USB Flash Drive containing documentation files and software: USB drivers, API drivers, SignalVu-PC software