Tektronix WVR5250 1RU Compact SDI/HDMI Multiformat Waveform Rasterizer

WVR5250 - Overview

• Features:

  • Two Serial Digital Inputs (SDI) and two High Definition Multimedia Interface (HDMI) inputs with High-bandwidth Digital Content Protection (HDCP)
  • Tektronix-patented Diamond and Arrowhead Displays for Color Gamut Compliance Monitoring
  • Tektronix-patented Spearhead Display and Luma Qualified Vector (LQVT) Display facilitate precise color adjustment for post production applications (Option PROD)
  • Stereoscopic 3D Video Displays for Camera Alignment and Production/Post-production Applications (Option S3D)
  • Comprehensive Data Monitoring helps to quickly resolve difficult content quality and reliability issues (Option DATA)
  • Simple 3G/HD/SD Color Bar and Pathological Signal Generator (Option GEN) for Troubleshooting Signal Paths and Equipment (Option 3G required for 3G-SDI test signal generation)
  • Variety of Monitoring Displays
  • Unmatched Display Versatility
   

• Specifications:

  • Serial Digital Video Interface
  • 2 inputs: Auto-detection between 3G, Dual Link, HD, and SD signals (Option 3G required for 3G formats)
  • Input Type: BNC, internally terminated 75 Ω
  • Input Level: 800 mVp-p, ±10%
  • Input Equalization: 270 Mb/s: Up to 215 m of type 1694A cable, 1.5 Gb/s: Up to 200 m of type 1694A cable, 3 Gb/s: Up to 130 m of type 1694A cable
  • Output: SDI Switched Output. Selectable, active input, or test signal
  • Return Loss (Inputs and Outputs), >15 dB from 1 MHz to 1.5 GHz, power on or off, >10 dB from 1.5 GHz to 3 GHz, power on or off
  • Monitor Output: Signal Format (DVI-I Output) - 1024x768, 60 Hz vertical rate. Picture display will be disabled while monitoring the HDCP. encrypted video signal through an HDMI input
    
    External Reference
  • Sync Formats: NTSC and PAL and tri-level sync
  • Input Type: Passive loop through BNC, 75 Ω compensated
  • DC Input Impedance: 20 kΩ, nominal
  • Return Loss: >40 dB to 6 MHz, >35 dB to 30 MHz
  • Lock Range: ±50 ppm
    
    High Definition Multimedia Interface (HDMI)
  • 2 inputs: Auto-format-detection
  • Output: HDMI switched output with HDCP
  • Connector type: Type A receptacle
  • HDCP: HDMI output is encrypted while receiving the HDCP encrypted content on a selected input.
    
    Serial Digital Waveform Vertical
  • Vertical Measurement Accuracy: At 1x gain, ±0.5% of 700 mV full scale; at 5x gain, ±0.2% of 700 mV full scale
  • Gain: 1x, 5x, variable range 0.25x to >7.5x
    Frequency Response
  • SD: Luminance (Y) channel ±0.5% to 5.75 MHz, Color Difference channels (Pb, Pr) ±0.5% to 2.75 MHz
  • HD: Luminance (Y) channel ±0.5% to 30 MHz, Difference channels (Pb, Pr) ±0.5% to 15 MHz
    
    Waveform Horizontal
  • Sweep Timing Accuracy: ±0.1%
  • Sweep Linearity: ±0.1%
    
    Audio
  • Level Meter Resolution: 0.056 dB steps at 30 dB scale from full scale to -20 dBFS, 0.20 dB steps at 70 dB scale for signals above -20 dBFS
  • Meter Ballistics: True peak, PPM type 1, PPM type 2, BBC PPM, Loudness
  • Defined/Programmable Level Detection: Mute, clip, user-programmable silence, over
  • Level Meter Accuracy: -0.5 dB (for analog), -0.2 dB (for digital) from 20 Hz to 20 kHz, 0 to -40 dBFS sine wave, Peak Ballistic mode
    
    Power
  • 12 V DC In
  • Power adapter accepts 100 to 240 V AC ±10% 50/60 Hz
    
    Input Voltage
  • Voltage Range: 12 to 15 V DC nominal, 10.75 to 18 V DC min-max operating
  • Supply Connection: XLR 4-pin male connector, Pin 1 = V(-), Pin 4 = V(+), Pin 2, 3: NC
  • Power Consumption: 27 W typical, 35 W max
  • Surge: 10 A at 12 V
  • Fuse Rating: 4 A, internal self-resetting fuse
  • Transient, Over, and Reverse Voltage: Reverse- and over-voltage protected to ±30 V DC
    
    Physical
  • Dimenions: 1.7 x 8.4 x 5.5 inch
  • Weight - Net: 1.8lb
   

• Item Includes:

  • 1x Tektronix WVR5250 SDI/HDMI Multiformat Waveform Rasterizer with 2 SDI & 2 HDMI Inputs