The FP-SVDA4 is the ideal choice in many applications where component video signals need to be distributed. Video inputs and outputs are made on the top-panel jacks. Power connections are made using either the full-size barrier block terminals or a dc power jack located in one end panel. A second dc power jack is provided on the other end panel for connecting additional FLAT-PAK modules.
The FP-SVDA4 has a single 4-pin mini-DIN INPUT jack for the component video signal. The input is 75 Ohm terminated. The gain for each component is user adjustable from the top panel. The GAIN potentiometers allow adjustment from unity to +6 dB. The GAIN potentiometers are normally set fully counterclockwise for unity gain, producing correct amplitudes of each component at the output jacks. The GAIN potentiometers are provided for installations in which individual gain is needed and proper instrumentation is available to set these GAIN controls. Four source-terminated Y-C outputs are provided through the output jacks. Unused outputs need not be terminated.