Continue Shopping View Cart
Markertek - The Future of Broadcast Supply

Call 800-522-2025
M-F 8:30am - 7pm EST

Free Shipping Promo Box
details

FREE SHIPPING No Minimum Order!

SHOP MARKERTEK EVERYDAY for all of your needs. Free shipping on almost every order placed on our website.
Special order & oversized freight intensive items ship at an additional cost. Continental US orders only.
Ask about our new Economy International Shipping Options.

Secure LoginClose X

Returning Markertek Customers

New Markertek Customers





Why Create an Account?

Creating a Markertek account now will save you time on future orders. You'll have full access to your order history and a personalized shopping experience.

 
Muxlab 500752 HDMI over IP Extender with PoE
  • Muxlab 500752 HDMI over IP Extender with PoE
  • Muxlab 500752 HDMI over IP Extender with PoE
 
Questions? Ask a Markertek Expert:
800-522-2025 Email

Muxlab 500752 HDMI over IP Extender with PoE

Manufacturer: MuxLab Inc

Item #: MUX-500752   •   MFG #: 500752

 
 

Share!

 
 
 

The HDMI over IP Extender allows an HDMI source to be connected via any Ethernet LAN thereby allowing AV broadcasts to be set up and changed without the need to install a dedicated cabling system.

The kit includes two units; HDMI over IP Encoder (500752-TX) and HDMI over IP Decoder (500752-RX). The HDMI Encoder converts an HDMI bitstream into IP allowing it to be transmitted over an Ethernet LAN. The HDMI Decoder converts the IP packets back to the original HDMI bitstream for playback via an HDMI display.

Note: This device supports PoE (PD), and is intended to be powered via a PoE (PSE) Ethernet Switch. If a PoE (PSE) Ethernet Switch is unavailable, then the power supply (500992) may be purchased separately.

 
  • Features

    • Extends 1080P HDMI signals up to 330ft (100m)
    • Supports up 16 transmitters and 200 receivers
    • Supports multicasting and broadcasting
    • Supports PoE
    • IR Control, HDCP compliant
     
  • Specifications

    • Environment: HDMI 1.3a, Ethernet, IGMP
    • Devices: DVD, plasma, projectors, monitors, TV, PC, laptops, servers supporting HDMI.
    • Transmission: Transparent to the user
    • Bandwidth: 225 MHz
    • Compression Method: MJPEG
    • Bit Rate: 60 Mbps
    • Latency: One (1) frame. At 30fps there is 33msec latency
    • Network Requirements: Point to Point: 100BaseT Multipoint: 1000BaseT
    • IR Frequency: 38 KHz
    • Configurations: Point-to-Point, Point-to-Multipoint, Multipoint-to-Multipoint*. *For multipoint-to-multipoint configuration the gigabit Ethernet switch must support the IGMP communications protocol.
    • Connectors:
    • One (1) HDMI receptacle. Note: HDMI cables not included.
    • One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair via 10/100BaseT
    • One (1) 3.5mm jacks for IR emitter/sensor.
    • Four (4) DIP Switches for device ID addressing.
    • DIP Switch: 4-position DIP to set Device ID

    • Maximum Distance Based on a maximum length of 6.6 ft (2 m) of HDMI cable per end.
    • Cat5e/6: 330 ft (100 m) up to 1080P* *Gigabit Ethernet required for 1080p
    • Note: When installed in an electrically noisy environment, an STP cable must be used. Also, cross-connection reduces the effective distance depending on the grade of twisted cable used.

    • RJ45 Pin Config Reverse Polarity Sensitive. Use EIA/TIA 568A or 586B straightthrough wiring.
    • RJ45 Link
    • Pin 1 ( R ) Pin 2 (T)
    • Pin 3 ( R ) Pin 6 (T)
    • Pin 4 ( R ) Pin 5 (T)
    • Pin 7 ( R ) Pin 8 (T)

    • Cable: One (1) Cat 5e/6 or better twisted pair cables required
    • Power Supply: Two (2) 110-240V/5VDC power supplies with interchangeable blades
    • Power Consumption: Transmitter: 2.9 Watt Receiver: 1.8 Watt
    • Temperature: Operating: 0° to 40°C Storage: -20° to 85°C Humidity: Up to 95% non-cond
    • Enclosure: Metal
    • Dimensions: 3.70" x 3.68" x 0.97" (94 x 93.5 x 24.6 mm)
    • Compliance: Regulatory: FCC, CE, RoHS Flammability: 94V0
     
  • Warranty

    • 2 Years
     
 
 

Add Accessories for your 500752: