-
Item# ARX-RS-1
The new Remote Switcher silently switches between two pairs of A or B female XLR inputs to a stereo pair of XLR male output connectors. ARX `SoftSwitch' technology achieves this with no loud bangs through the audio system when switching.
Input Channel control can be selected in 2 ways:
Mode 1 by remote switch / relay closure (using an external power pack / wall wart), or Mode 2 by 12 - 24VDC supplied from an EWIS panel or similiar.
Typical applications include switching between Audio Systems,...

-
Item# ARX-ABS-1
The simplest ideas are usually the best! The new ISO Switcher is a stereo Input signal switcher for the extremely popular Audibox range. A front panel push button switch silently switches between two pairs of A or B female XLR inputs to a stereo pair of XLR male output connectors. ARX 'SoftSwitch' technology achieves this with no loud noises through the audio system when switching. Typical applications include switching between Live Band or DJ when both are using the same speaker system.
Passive...

-
Item# ARX-RS-2
ARX's new RS-2 is a remote switched stereo Aselector with 2-XLR Female inputs and 4-XLR Male outputs. It works with the extremely popular Audibox ™ range. The new RS-2 remote switcher silently switches between a stereo pair of XLR female input connectors to either A or B pairs of male XLR outputs. ARX SoftSwitch ™ technology achieves this with no loud bangs through the audio system when switching. Typical applications include switching between...

-
Item# ARX-ABS-2
The ARX-ABS-2 is a front panel push switch that silently switches a pair of female XLR inputs to either one of two pairs of XLR male output connectors. ARX "SoftSwitch" technology achieves this with no loud transients or bangs through the audio system when switching. Typical applications include switching between studio speaker systems and equipment testing. Specifications: Frequency Response: DC to Daylight ± 0.0dB
Power Requirements: None, passive unit.
Input Connectors: Female XLR, Wired...

-
Item# ARX-NETSPLIT
The ARX NetSplit is a unique `Dante / Analog Splitter. It can receive audio channels from a Dante network and provide studio quality, low latency audio via balanced XLR output connectors to analog audio equipment.
Thus any audio available on the network can be routed via the NetSplit to an amplifier, powered speaker(s), mixing console, digital signal processor and many other analog audio devices.
In Dante input to Analog output mode it will extract 2 channels of digital audio from the...

-
Item# ARX-QS-1
Careful user-friendly annotation makes it easy to understand and to see which input or output is being switched. A bank of four latching interlocked switches mean you can only select one switch at a time. A 'scribble-strip' lets you write above each switch with a Chinagraph or grease pencil, so you can easily confirm what is being switched.
Its innovative precision design allows the Qswitch to be used in two modes:
1x4 for sending any one of 4 sets of Powered Loudspeakers, Sub Woofers etc, or
4x1...
