-
Item# BDI-8-16-16
The BDI 8/16-16 16-Channel ASwitcher is a passive relay based broadcast switcher that accepts two sets of 8 or 16 channels that can be switched between; available in two models: either an 8- or 16-channel configuration. Use in any application where multiple switch connections are needed, such as studio switching, emergency switching or multi-channel audio switching. Simple ground start remote control and status are available from the rear panel. Front panel command and status buttons are...

-
Item# BDI-8-16-16D
The BDI 8/16-16 16-Channel ASwitcher with Dual Power Supply Option is a passive relay based broadcast switcher that accepts two sets of 8 or 16 channels that can be switched between; available in two models: either an 8- or 16-channel configuration. Use in any application where multiple switch connections are needed, such as studio switching, emergency switching or multi-channel audio switching. Simple ground start remote control and status are available from the rear panel. Front panel...

-
Item# BDI-8-16-8
The BDI 8/16 8-Channel ASwitcher is a passive relay based broadcast switcher that accepts two sets of 8 or 16 channels that can be switched between; available in two models: either an 8- or 16-channel configuration. Use in any application where multiple switch connections are needed, such as studio switching, emergency switching or multi-channel audio switching. Simple ground start remote control and status are available from the rear panel. Front panel command and status buttons are standard....

-
Item# BDI-8-16-8D
The BDI 8/16 8-Channel ASwitcher with Dual Power Supply Option is a passive relay based broadcast switcher that accepts two sets of 8 or 16 channels that can be switched between; available in two models: either an 8- or 16-channel configuration. Use in any application where multiple switch connections are needed, such as studio switching, emergency switching or multi-channel audio switching. Simple ground start remote control and status are available from the rear panel. Front panel command...

-
Item# BDI-ACS-300
The BDI ACS-300 Six Channel Audio Controller was created to meet the demands of today's multi-channel audio environment. The unit is designed to accept six channels of audio and, upon remote control, dim all six channels by 10-, 20- or 30-db. A second command line mutes all channels simultaneously. There are also separate mute command lines for individual or grouped channel muting. The unit can support up to six channels simultaneously, three stereo pairs, or six individual channels. Uses...

-
Item# BDI-AIP-100
Using the Tascam and Yamaha DB-25 pin out standards, BDI has produced a simple and neat way to make connections to high quality XLR connectors via standard DB25 connections. The AIP-100 8 Channel XLR Analog Panel is an ideal solution to high cost snakes that end up hanging, or falling to the floor. These quality panels help you organize your connections by simply mounting to the front or rear of your rack rails.
This is an excellent choice for radio and television stations, control rooms,...

-
Item# BDI-DIP-100
Using the Tascam and Yamaha DB-25 pin out standards, BDI has produced a simple and neat way to make connections to high quality XLR connectors via standard DB25 connections. The DIP-100 8 Channel XLR Digital Panel is an ideal solution to high cost snakes that end up hanging, or falling to the floor. These quality panels help you organize your connections by simply mounting to the front or rear of your rack rails.
This is an excellent choice for radio and television stations, control rooms,...

-
Item# BDI-DIP-100B75
The BDI DIP-100B75 Digital BNC 75 Ohm 19 Inch Panel has 1 Set of XLR Analog Female Input and 1 set of 75 Ohm BNC I/O AES Standard Digital Audio Interface. Designed to interface to all BDI Audio Toolbox Series products but can be used with other manufacturer's products conforming to the AES and Tascam™ standards. Provides a 1 RU interface for compact and neat installations. These high quality panels are made from gold contact XLR and DB25 connectors and a rugged steel rack panel. Each...

-
Item# BDI-PAS-200
The BDI PAS-200 Passive Audio Switcher provides Aswitching of up to 16 individual balanced pairs of digital or analog audio. The PAS-200 is designed to meet the rigors of live sound, production, recording or broadcast environments. Feed up to 16 A and B inputs and the PAS-200 can be programmed to switch one at a time or any grouping of the 16 channels to 16 outputs. Audio I/O is Tascam™ standard. Easy setup and command using the BDI Stack GUI interface. What makes the PAS-200 even...
