-
Item# CT-FANRK-B
The CT-FANRK-B is a rack mountable ventilation system that incorporates 3 individual fans in a 3-rack space (5.25") housing. A single two-prong AC plug is attached to all three fans to minimize the number of outlets needed. The fans are reversible to provide either exhaust or air intake.
The CT-FANRK-B operates with a very low amount of noise while maintaining a high volume of air movement. Each individual fan is capable of moving up to 92 cubic feet of air per minute for a combined flow...

-
Item# CT-CTA-30RK-1000
The CTA-30RK-1000 is a professional quality 19" rack mountable broadband launch amplifier designed to produce Clean signals for a commercial grade private cable network. Employing a pushpull design, the CTA-30RK-1000 produces High output levels with extremely low distortion and harmonic content. As a broadband amplifier with a frequency range of 54-1000 MHz, The CTA-30RK1000 supports up to 158 channels.
Designed for commercial grade headend systems,...

-
Item# CT-FAN3-QTRK-B
19 Inch rack mountable high velocity triple fan blower. Draws air in from the bottom of the chassis and out the front of the chassis. 1RU (1.75 Inch) high, front panel power selector switch, ultra quiet model.
The CT-FAN3-QTRK-B is a rack mountable ventilation system that incorporates 3 individual fans in a single rack space (1.75") housing. A single power output is attached to all three fans to minimize the number of outlets needed. The fans draw air in from the bottom of the chassis and out...

-
Item# CT-CTGT8-14
Cabletronix CTGT8-14 is an 8 port 14dB Coaxial Tap with solder back for excellent shielding >-130 dB, 5-1,000 MHz frequency range, and an integrated grounding screw.
Features: Solder back for excellent shielding
5-1,000 MHz Frequency range
Integrated grounding screw
Wall mounting screws included
High Isolation

-
Item# CT-CTGT8-20
Cabletronix CTGT8-20 is an 8 port 20dB Coaxial Tap with solder back for excellent shielding >-130 dB, 5-1,000 MHz frequency range, and an integrated grounding screw. Features: Solder back for excellent shielding
5-1,000 MHz Frequency range
Integrated grounding screw
Wall mounting screws included
High Isolation

-
Item# CT-CTHDA-1P
The Cabletronix CTHDA-1P is a wall mounted 1GHz multi-media drop amplifier for use in CATV systems that require two way multi-media networking. These are low noise amplifiers with high isolation between ports, 6KV surge protection on all ports, electrostatic discharge protection, and zinc die cast housing to prevent RFI. The CTHDA amplifiers can be remotely powered over coax, line powered through an RF port, or externally powered through a "POWER-IN" port.
Features: For use in...

-
Item# CT-CTRC-12
The 12-Space Micro Series Rack Mountable Chassis from CableTronix is designed for use with CableTronix micro modulators and the CTPS-12 Chassis Rack Mountable Power Supply.

-
Item# CT-DLM870D
The CT-DLM870D is a handheld signal level meter is designed to provide the most valuable features at reduced cost. It performs fast and efficiently to take carrier amplitude measurements. It can also take the direct power measurement of DVB signals. This unit simultaneously displays video carrier, audio carrier strength, V/A measurements, Tilt measurement, C/N measurement and Trunk voltage measurement. This unit is perfect for balancing digital QAM and analog headend systems, reading digital off...

-
Item# CT-DT-HDIPCOM
The Cabletronix DT-HDIPCOM HD IP Streamer allows the user to stream any one audio/video source over an IP Network to multiple TV's or connected computers within the IP Network and is compatible with Technicolor COM3000 systems for local content insertion. The IP Streamer accepts an HDMI, component, or composite video input and the unit is designed to deliver a rich HD/SD streaming experience for its users deploying MPEG-2 or MPEG-4 standards.
The DT-HDIPCOM streaming server enables high-definition...

-
Item# CT-DT-HDIPSS
The Cabletronix DT-HDIPSS HD IP Streamer allows the user to stream any one audio/video source over an IP Network to multiple TV's or connected computers within the IP Network and is compatible with DRE Plus managed systems. The IP Streamer accepts an HDMI, component, or composite video input and the unit is designed to deliver a rich HD/SD streaming experience for its users deploying MPEG-2 or MPEG-4 standards.
The DT-HDIPSS streaming server enables high-definition streaming with resolutions...

-
Item# CT-DTIPTVQAMASI2
The Cabletronix DT-IPTV-QAM-ASI-2H encoder/modulator simultaneously provides a QAM, ASI, and IP output stream making it ideal for any commercial RF or IP network. The high quality HD design allows for watching action packed movies and sports channels on any HDTV. The space saving design delivers 2 High Quality HD QAM/IP/ASI channels in a single1RU space.
Features: Front panel LCD Display for easy installation
High Resolution 1080i/1080p
VCN Mode for Virtual Channel Mapping
Composite,...

-
Item# CT-DTIPTVQAMASI4
The DT-IPTV-QAM-ASI-4HC encoder/modulator provides a dynamic independent DVB-C Annex B QAM output along with 4 IP and ASI (MPTS) streams making it ideal for any commercial RF system. The high quality HD design allows for watching action packed movies and sports channels on any HDTV. The DT-IPTV-QAM-ASI-4HC encoder/modulator is a feature rich digital encoding platform allowing it to be deployed in a variety of installations. This space saving design delivers up to 4 High Quality HD/SD QAM...

-
Item# CT-HDEXT-330-B
The CableTronix CT-HDEXT-330-B is a signal extender which utilizes a single Cat5E/6 cable. The unit is capable of transporting HDMI signals and IR remote control signals over one CAT5E/6 cable. This easy to install system allows for transmission distances over twisted pair up to 330 feet.
The CT-HDEXT-330-B uses the latest technology to bridge the gap between HDMI transport over long distances and the limitations of HDMI cables. This fully compliant HDCP unit also has easy to...

-
Item# CT-HDVD-EXTIR180
The CT-HDVD-EXT-IR180 kit has the ability to transmit and receive a 1080p HD source up to 180 feet along with Infrared control over a single Cat5e / Cat6 4 Pair UTP Cable. With a single low cost CAT-5e/6 cable, users can readily extend HDTV sources from DVD players, PS3, PC, and many other sources compliant with TMDS HDMI to distant display monitors including HD enabled TV sets or LCD PC monitors. This cost effective flexibility allows HDCP compliant DVD players or PS3 to transmit...

-
Item# CT-HDVD-HDWR-KIT
The CT-HDVD-HDWR-KIT is a long range wireless HDbitT HDMI AV transmitter that can extend high definition audio and video to any HDTV display up to 400' away with line of sight or 150' through normal buildings. It supports HD resolutions up to 1080p and provides remote transmission of infrared control from the monitoring device to the source device. The CT-HDVD-HDWR-KIT is the perfect solution for distributing high definition video and audio in locations where wires can not be run.
Features: Transmits...

-
Item# CT-HDVD-HDWR-RX
The CT-HDVD-HDWR-KIT is a long range wireless HDbitT HDMI AV transmitter that can extend high definition audio and video to any HDTV display up to 400’ away with line of sight or 150’ through normal buildings. It supports HD resolutions up to 1080p and provides remote transmission of infrared control from the monitoring device to the source device. The CT-HDVD-HDWR-KIT is the perfect solution for distributing high definition video and audio in locations where wires can not be run. Up to three total...

-
Item# CT-SAW860-CH4
27 Channels AvailableThe Cabletronix SAW860-CH4 is a fixed channel, PLL controlled, video and audio modulator with SAW filtering. It is available for any cable channel from 2 to 127. It's video dynamic range insures 87.5% modulation depth over a wide video input range. The vestigial sideband selectivity allows maintenance free adjacent channel configuration. An efficient power supply enables cool and stable operation. The unit offers high performance, low cost and compact design. The unit is backed by a two year...
Read More
-
Item# CT-SAW860-CH6
The Cabletronix SAW860-CH6 is a fixed channel, PLL controlled, video and audio modulator with SAW filtering. It is available for any cable channel from 2 to 127. It's video dynamic range insures 87.5% modulation depth over a wide video input range. The vestigial sideband selectivity allows maintenance free adjacent channel configuration. An efficient power supply enables cool and stable operation. The unit offers high performance, low cost and compact design. The unit is backed by a two year...
